Date: Mon, 21 May 2001 15:50:18 GMT From: Wilko Bulte <wkb@freebie.demon.nl> To: freebsd-alpha@freebsd.org Subject: 4.3R on big hulking Tlaser.. Message-ID: <E151rwo-000GPN-00@post.mail.nl.demon.net>
next in thread | raw e-mail | index | archive | help
Hi,
Finally found some time to 'dd' the 2 Mbyte floppy image to a SCSI
disk and boot the 8-cpu AS8400 from that disk. As you can see below
that worked fine. It is currently installing from CDROM. I'll
have it do a buildworld overnight.
I hope to go to -current pretty soon, as the other 7 CPUs feel so bored ;)
It is currently only 256MB of RAM, the other 3 memory modules are 4GB a piece
and therefore too big for FreeBSD's taste.
I have to check on the KZPAA (NCR810), the console also has
problems using the CDROM attached to it.
cheers,
Wilko
Script started on Mon May 21 15:04:19 2001
chuck#telnet dsrv2 2001
Trying 172.16.10.51...
Connected to dsrv2.
Escape character is '^]'.
e8.e7.e6.e5.e3.
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
A . . M . P P P P TYP
o . . + . ++ ++ ++ ++ ST1
. . . . . EE EE EE EB BPD
o . . + . ++ ++ ++ ++ ST2
. . . . . EE EE EE EB BPD
c3.e2.e0.ce.cd.cb.de.ca.c9.c8.
c7.c5.c4.c3.dd.dc.db.da.d9.
+ . . + . ++ ++ ++ ++ ST3
. . . . . EE EE EE EB BPD
d8.d7.d6.d5.d4.
. . . + + + + . + . . . C0 PCI +
. . . . . . . . + . . . C1 PCI +
. + . . . . . . + . . . C2 PCI +
. + . . . . . . + . . . C3 PCI +
. . . A0 . . . . . ILV
. . . 256 . . . . . 256MB
AlphaServer 8400 8-5/625/4, Console V5.8-2 21-JUL-2000 16:30:31
SROM V3.1, OpenVMS PALcode V1.21-1, Tru64 UNIX PALcode V1.23-1
System Serial = AY60323611, OS = UNIX, 15:01:17 May 21, 2001
Configuring I/O adapters...
isp0, slot 3, bus 0, hose0
tulip0, slot 5, bus 0, hose0
kzpaa0, slot 6, bus 0, hose0
isp1, slot 7, bus 0, hose0
tulip1, slot 8, bus 0, hose0
isp2, slot 3, bus 0, hose1
kzpsa0, slot 3, bus 0, hose2
kgpsa0, slot 10, bus 0, hose2
kzpsa1, slot 3, bus 0, hose3
kgpsa1, slot 10, bus 0, hose3
Configuration completed
Checking system information
P00>>>sho dev
polling for units on isp0, slot 3, bus 0, hose0...
pka.7.0.3.0 pka term on Bus ID 7 5.57
polling for units on kzpaa0, slot 6, bus 0, hose0...
pkb.7.0.6.0 pkb Bus ID 7
polling for units on isp1, slot 7, bus 0, hose0...
pkc.7.0.7.0 pkc term on Bus ID 7 5.57
dkc100.1.0.7.0 DKC100 RZ29B 0014
polling for units on isp2, slot 3, bus 0, hose1...
pkd.7.0.3.1 pkd term off Bus ID 7 5.57
dkd100.1.0.3.1 DKD100 RZ29B 0014
dkd200.2.0.3.1 DKD200 RZ29B 0014
dkd300.3.0.3.1 DKD300 RZ29B 0014
dkd400.4.0.3.1 DKD400 RZ29B 0014
dkd500.5.0.3.1 DKD500 RZ28D 0008
polling for units on kzpsa0, slot 3, bus 0, hose2...
pke.7.0.3.2 pke TPwr 1 Fast 1 Bus ID 7 N01 A12
polling for units on kgpsa0, slot 10, bus 0, hose2...
kgpsaa0.0.0.10.2 - LINK_DOWN timeout
kgpsaa0.0.0.10.2 PGA0 WWN 1000-0000-c921-7fa8
kgpsaa0.0.0.10.2 Link is down.
polling for units on kzpsa1, slot 3, bus 0, hose3...
pkf.7.0.3.3 pkf TPwr 1 Fast 1 Bus ID 7 N01 A12
polling for units on kgpsa1, slot 10, bus 0, hose3...
kgpsab0.0.0.10.3 - LINK_DOWN timeout
kgpsab0.0.0.10.3 PGB0 WWN 1000-0000-c921-7ea0
kgpsab0.0.0.10.3 Link is down.
P00>>>boot dkc100
(boot dkc100.1.0.7.0 -flags a)
SRM boot identifier: scsi 0 7 0 1 100 ef00 10201077
boot adapter: isp1 rev 5 in bus slot 7 off of kftha0 in TLSB slot 8
block 0 of dkc100.1.0.7.0 is a valid boot block
reading 15 blocks from dkc100.1.0.7.0
bootstrap code read in
Building FRU table.......
FRU table size = 3997(14743)
base = 200000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 1f0000
initializing machine state
setting affinity to the primary CPU
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 1.0
(root@jkh101.osd.bsdi.com, Sat Apr 21 20:20:13 GMT 2001)
Memory: 262144 k
|/-\|/-\|/-\|/-\|/-\|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 9 seconds...
Booting [kernel]...
/-\|/-Entering kernel at 0xfffffc000032b8c0...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #1: Sun Apr 22 02:16:27 GMT 2001
root@jkh101.osd.bsdi.com:/usr/src/sys/compile/BOOTMFS
AlphaServer 8400
AlphaServer 8400 5/625, 612MHz
8192 byte page size, 8 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x10000100020117
real memory = 265650176 (259424K bytes)
avail memory = 250814464 (244936K bytes)
Preloaded elf kernel "kernel" at 0xfffffc0000924000.
md1: Malloc disk
tlsbcpu0: <Dual CPU, 4MB cache> at tlsb0 node 0
gbus0 on tlsbcpu0
zsc0: <Z8530 uart> on gbus0 offset 0x10000000
zs0 on zsc0 channel A
zs1 on zsc0 channel B
mcclock0: <MC146818A real time clock> on gbus0 offset 0x20000000
tlsbcpu1: <Dual CPU, 4MB cache> at tlsb0 node 0
tlsbcpu2: <Dual CPU, 4MB cache> at tlsb0 node 1
tlsbcpu3: <Dual CPU, 4MB cache> at tlsb0 node 1
tlsbcpu4: <Dual CPU, 4MB cache> at tlsb0 node 2
tlsbcpu5: <Dual CPU, 4MB cache> at tlsb0 node 2
tlsbcpu6: <Dual CPU, 4MB cache> at tlsb0 node 3
tlsbcpu7: <Dual CPU, 4MB cache> at tlsb0 node 3
tlsbmem0: <MS7CC Memory Module> at tlsb0 node 5
kft0: <KFTHA I/O interface> at tlsb0 node 8
dwlpx0: <DWLPA PCI adapter> on kft0 hose 0
pci0: <PCI bus> on pcib0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x87fffb00-0x87fffbff mem
0x87f9e000-0x87f9efff irq 12 at device 3.0 on pci0
isp0: Node 8 Hose 0 Slot 3 interrupting at TLSB vector 0x8403 intpin 1
de0: <Digital 21040 Ethernet> port 0x87fffc00-0x87fffc7f mem 0x87f9dd00-0x87f9dd7f irq 20
at device 5.0 on pci0
de0: Node 8 Hose 0 Slot 5 interrupting at TLSB vector 0x8405 intpin 1
de0: DEC 21040 [10Mb/s] pass 2.3
de0: address 00:00:f8:20:3b:7b
sym0: <810> port 0x87fffd00-0x87fffdff mem 0x87f9de00-0x87f9deff irq 24 at device 6.0 on
pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
CACHE TEST FAILED: host wrote 1, chip read 38275456.
CACHE TEST FAILED: chip wrote 2, host read 0.
sym0: CACHE INCORRECTLY CONFIGURED.
device_probe_and_attach: sym0 attach returned 6
isp1: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x87fffe00-0x87fffeff mem
0x87f9f000-0x87f9ffff irq 28 at device 7.0 on pci0
isp1: Node 8 Hose 0 Slot 7 interrupting at TLSB vector 0x8407 intpin 1
de1: <Digital 21140A Fast Ethernet> port 0x87ffff00-0x87ffff7f mem 0x87f9df00-0x87f9df7f
irq 32 at device 8.0 on pci0
de1: Node 8 Hose 0 Slot 8 interrupting at TLSB vector 0x8408 intpin 1
de1: DEC DE500-AA 21140A [10-100Mb/s] pass 2.2
de1: address 00:00:f8:1a:9a:68
de1: enabling 100baseTX port
dwlpx1: <DWLPA PCI adapter> on kft0 hose 1
pci16: <PCI bus> on pcib1
isp2: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8fffff00-0x8fffffff mem
0x8ffef000-0x8ffeffff irq 12 at device 3.0 on pci16
isp2: Node 8 Hose 1 Slot 3 interrupting at TLSB vector 0x8413 intpin 1
dwlpx2: <DWLPA PCI adapter> on kft0 hose 2
pci32: <PCI bus> on pcib2
pci32: <unknown card> (vendor=0x1011, dev=0x0008) at 3.0 irq 12
pci32: <unknown card> (vendor=0x10df, dev=0xf700) at 10.0 irq 40
dwlpx3: <DWLPA PCI adapter> on kft0 hose 3
pci48: <PCI bus> on pcib3
pci48: <unknown card> (vendor=0x1011, dev=0x0008) at 3.0 irq 12
pci48: <unknown card> (vendor=0x10df, dev=0xf700) at 10.0 irq 40
Timecounter "alpha" frequency 611787624 Hz
Waiting 15 seconds for SCSI devices to settle
de0: autosense failed: cable problem?
Mounting root from ufs:/dev/md0c
da0 at isp1 bus 0 target 1 lun 0
da0: <DEC RZ29B (C) DEC 0014> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da1 at isp2 bus 0 target 1 lun 0
da1: <DEC RZ29B (C) DEC 0014> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da4 at isp2 bus 0 target 4 lun 0
da4: <DEC RZ29B (C) DEC 0014> Fixed Direct Access SCSI-2 device
da4: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da4: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da5 at isp2 bus 0 target 5 lun 0
da5: <DEC RZ28D (C) DEC 0008> Fixed Direct Access SCSI-2 device
da5: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da5: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
da3 at isp2 bus 0 target 3 lun 0
da3: <DEC RZ29B (C) DEC 0014> Fixed Direct Access SCSI-2 device
da3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da3: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da2 at isp2 bus 0 target 2 lun 0
da2: <DEC RZ29B (C) DEC 0014> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
WARNING: clock lost 17561 days -- CHECK AND RESET THE DATE!
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
--
| / o / / _ Arnhem, The Netherlands email: wilko@freebsd.org
|/|/ / / /( (_) Bulte http://www.freebsd.org
http://www.nlfug.nl
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E151rwo-000GPN-00>