Date: Tue, 4 Sep 2001 05:26:55 -0700 (PDT) From: Patrick Murphy <murphyp1@ais.msu.edu> To: freebsd-gnats-submit@freebsd.org Subject: alpha/30308: 5.0-CURRENT will not boot on Alpha 2100A/250 Message-ID: <200109041226.f84CQtn74339@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 30308 >Category: alpha >Synopsis: 5.0-CURRENT will not boot on Alpha 2100A/250 >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-alpha >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Sep 04 05:30:00 PDT 2001 >Closed-Date: >Last-Modified: >Originator: Patrick Murphy >Release: 5.0-CURRENT >Organization: Michigan State University >Environment: FreeBSD 5.0-CURRENT #1: Mon Sep 3 22:18:37 EDT 2001 murphyp1@bsdalpha.ais.msu.edu:/usr2/FreeBSD-Source-Current/sys/alpha/compile/GENERIC DEC AlphaServer 2100A AlphaServer 2100A 5/250, 250MHz >Description: I am trying to update my Alpha 2100A/250 from 4.4-RC, which has been running fine, to 5.0-CURRENT (from cvsup of 09/01/2001). The machine has three processors, and I am trying to test out the SMP support for it. When I boot the new 5.0-CURRENT kernel it aborts with the following captured output: syncing disks... done Uptime: 4d15h18m30s Rebooting... halted CPU 0 halt code = 5 HALT instruction executed PC = fffffc00005c7790 CPU 0 booting resetting all I/O buses waiting for drb.0.0.6.0 to start... (boot dka0.0.0.2001.0 -flags 0) block 0 of dka0.0.0.2001.0 is a valid boot block reading 15 blocks from dka0.0.0.2001.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 3fff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Loading /boot/loader Console: SRM firmware console VMS PAL rev: 0x4000300010114 OSF PAL rev: 0x4000100020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 1.1 (murphyp1@bsdalpha.ais.msu.edu, Fri Aug 31 18:57:25 EDT 2001) Memory: 1048576 k Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x46ef68+0x7a538 syms=[0x8+0x590a0+0x8+0x4250c] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel]... Entering kernel at 0xfffffc00003389a0... sio1: gdb debugging port Unrecognized boot flag '0'. Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Mon Sep 3 22:18:37 EDT 2001 murphyp1@bsdalpha.ais.msu.edu:/usr2/FreeBSD-Source-Current/sys/alpha/compile/GENERIC DEC AlphaServer 2100A AlphaServer 2100A 5/250, 250MHz 8192 byte page size, 3 processors. CPU: EV5 (21164) major=5 minor=5 OSF PAL rev: 0x4000100020116 real memory = 1071570944 (1046456K bytes) avail memory = 1036615680 (1012320K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000888000. t20: using interrupt type 1 on pci bus 0 t20: <T2 Core Logic chipset> halted CPU 0 halt code = 6 double error halt PC = 18fe8 starting console on CPU 0 starting console on CPU 0 breakpoint at PC 1305c8 desired, XDELTA not loaded interrupt through vector 670 on CPU 0 EV5 detected B-Cache parity or ECC error CPU detected C-bus error *** unexpected machine check through vector 00000067 EV5 IPRs (CPU 0): EXC_ADDR:0000000000072530 EXC_SUM: 0000000000000000 EXC_MASK:0000000000000000 PAL_BASE:0000000000008000 ISR: 0000000000000000 ICSR: 0000004144800000 EI_ADDR: FFFFFF000020000F EI_STAT: FFFFFFF014FFFFFF VA: 0000000000200004 SC_ADDR: FFFFFF00001F0A2F SC_STAT: 0000000000000000 MM_STAT: 0000000000016451 IC_PERR_STAT: DC_PERR_STAT: BC_TAG_ADDR: 0000000000000000 0000000000000000 FFFFFF80100F0FFF CPU CSRs (CPU 0): CREG: 380003F238000002 ESREG: 0300000003240000 EVBCR: 0000006100000061 EVBVEAR: 03E8000603E80006 EVBCER: 0000000000000000 EVBCEAR: B800000AB800000A EVBUER: 8000000080000000 EVBUEAR: B800000EB800000E EVRESV: 0000000000000000 DTCTR: 0000011100000111 DTER: 00000000000002E0 DTTCR: 0000000000000000 DTTR: BE80000DBE80000D DTRESV: 0000000000000000 IBCSR: 0000100000001000 IBEAR: 4F203E83E0000073 ACR: 0000012000000120 CBCR: 0000110100001001 CBER: 00000000010B0000 CBEALR: 4F203E67E3C00083 CBEAHR: 0F203E67E3C00083 CBRESV: 0000000000000000 ALR: 000F3B61000F3B61 PMBR: 0000000000000000 IIRR: 0000000000000000 SICR: 0000000000000000 PMCR: 0000000000000000 PMR1: 0000000000000000 PMR2: 0000000000000000 PMR3: 0000000000000000 PMR4: 0000000000000000 PMR5: 0000000000000000 Primary I/O Interface CSRs: IOCSR: FE240E0D23020D80 CERR1: 0000000000000000 CERR2: E3800010E3800010 CERR3: 00203E9340203E93 PERR1: 0000000000080000 PERR2: 00000002000003FD HAEO_1: 0000000000000010 HAEO_2: 0000000000000000 HBASE: 0000000000002000 WBASE1: 00000000000807FF WMASK1: 000000007FF00000 TBASE1: 0000000000000000 WBASE2: 0000000000000000 WMASK2: 0000000000000000 TBASE2: 0000000000000000 IVRPRIA: 0000002400000000 HAEO_3: 0000000000000000 HAEO_4: 0000000000000003 Memory Module 0 CSRs: ERR: 0000000000000000 CTRAP1: E2000008E2000008 CTRAP2: 00203E8740203E87 CONFIG: 8005506880055068 EDCSTAT1:042D084E042D0B66 EDCSTAT2:000000170000000D EDCCTRL: 2000000020000000 SB_CTRL: 0000080000000800 REF_CTRL:000001D8000001D8 Memory Module 1 CSRs: ERR: 0000000000000000 CTRAP1: E2400008E2400008 CTRAP2: 00203E9340203E93 CONFIG: 8015506980155069 EDCSTAT1:0C1400810C140839 EDCSTAT2:000000170000000D EDCCTRL: 2000000020000000 SB_CTRL: 0000080000000800 REF_CTRL:000001D8000001D8 Process powerup, pcb = 00027E80 pc: 0000000000072530 ps: 1000000000000000 r2: 0000000000130F5C r5: 000000003FDFE000 r3: 00000000000224F4 r6: 0000000000000000 r4: 0000000000000060 r7: 0000000000000005 exception context saved starting at 00029C00 GPRs: 0: 00000000 0002B280 16: 00000000 00200000 1: FFFFFFFF FFFFFFE0 17: 00000000 0002B280 2: 00000000 0010E348 18: 00000000 0002B280 3: 00000000 0002B280 19: 00000000 0002B288 4: 00000000 00200000 20: 00000000 00000011 5: 00000000 3FDFE000 21: 00000000 00000000 6: 00000000 00000000 22: 00000000 000F3B60 7: 00000000 00000005 23: 00000000 00000000 8: 00000000 000302F8 24: 00000000 00005CBF 9: 00000000 00000000 25: 00000000 00000003 10: 00000000 00000000 26: 00000000 00054728 11: 00000000 00000000 27: 00000000 00131700 12: 00000000 00000000 28: 00000000 00136190 13: 00000000 00000000 29: 00000000 00029D50 14: 00000000 00000000 30: 00000000 00029D50 15: 00000000 00000000 dump of active call frames: PC = 0007252C PD = 0010E348 FP = 00029D50 SP = 00029D50 R2 R3 R4 R5 R6 R7 R8 R29 saved starting at 00029D58 R2 = 0010E3E8 R3 = 00000000 R4 = 000303AC R5 = 0013E000 R6 = 000C1500 R7 = 00000000 R8 = 3FFFE000 R29 = 00029DA0 PC = 0006760C PD = 0010E3E8 FP = 00029DA0 SP = 00029DA0 R2 R3 R4 R5 R6 R7 R8 R29 saved starting at 00029DA8 R2 = 0010E420 R3 = 00000000 R4 = 00000001 R5 = 000F0F98 R6 = 00000000 R7 = 00000000 R8 = 00000000 R29 = 00029E40 PC = 0006D3B8 PD = 0010E420 FP = 00029E40 SP = 00029DF0 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R29 saved starting at 00029FC8 R2 = 0010D1E0 R3 = 00027E80 R4 = 00028050 R5 = 00000000 R6 = 00000000 R7 = 00000000 R8 = 00000000 R9 = 00000000 R10 = 00000000 R11 = 00000000 R29 = 0002A030 PC = 00070C70 PD = 0010D1E0 FP = 0002A030 SP = 00029FE0 R2 R3 R4 R29 saved starting at 0002A038 R2 = 00000000 R3 = 00000000 R4 = 00000000 R29 = 00000000 probing hose 0, PCI probing PCI-to-EISA bridge, bus 1 probing PCI-to-PCI bridge, bus 2 bus 2, slot 1 -- pka -- NCR 53C810 bus 2, slot 6 -- dra -- Mylex DAC960 bus 2, slot 7 -- ewa -- DECchip 21140-AA bus 0, slot 6 -- drb -- Mylex DAC960 bus 0, slot 7 -- ewb -- DECchip 21140-AA bus 0, slot 9 -- vga -- S3 Trio64/Trio32 interrupt through vector 670 on CPU 0 EV5 detected B-Cache parity or ECC error *** unexpected machine check through vector 00000067 EV5 IPRs (CPU 0): EXC_ADDR:0000000000080018 EXC_SUM: 0000000000000000 EXC_MASK:0000000000000000 PAL_BASE:0000000000008000 ISR: 0000000000000000 ICSR: 0000004144800000 EI_ADDR: FFFFFF000008001F EI_STAT: FFFFFFF014FFFFFF VA: 0000000000000200 SC_ADDR: FFFFFF000001074F SC_STAT: 0000000000000000 MM_STAT: 000000000000DA10 IC_PERR_STAT: DC_PERR_STAT: BC_TAG_ADDR: 0000000000000000 0000000000000000 FFFFFF80100F0FFF CPU CSRs (CPU 0): CREG: 380003F238000002 ESREG: 0000000000000000 EVBCR: 0000006100000061 EVBVEAR: 03E8800603E88006 EVBCER: 0000000000000000 EVBCEAR: B800000AB800000A EVBUER: 8000000080000000 EVBUEAR: B800000EB800000E EVRESV: 0000000000000000 DTCTR: 0000011100000111 DTER: 00000000000002E0 DTTCR: 0000000000000000 DTTR: BE80000DBE80000D DTRESV: 0000000000000000 IBCSR: 0000100000001000 IBEAR: 4F203E8BE0000073 ACR: 0000012000000120 CBCR: 0000110100001001 CBER: 0000000000000000 CBEALR: 4F203E8BE0000093 CBEAHR: 0F203E8BE000009B CBRESV: 0000000000000000 ALR: 000F3B61000F3B61 PMBR: 0000000000000000 IIRR: 0000000000000000 SICR: 0000000000000000 PMCR: 0000000000000000 PMR1: 0000000000000000 PMR2: 0000000000000000 PMR3: 0000000000000000 PMR4: 0000000000000000 PMR5: 0000000000000000 Primary I/O Interface CSRs: IOCSR: FE240E0D23020D80 CERR1: 0000000000000000 CERR2: E3800010E3800010 CERR3: 00203E8B40203E8B PERR1: 0000000000080000 PERR2: 00000003000003F9 HAEO_1: 0000000000000010 HAEO_2: 0000000000000000 HBASE: 0000000000002000 WBASE1: 00000000000807FF WMASK1: 000000007FF00000 TBASE1: 0000000000000000 WBASE2: 0000000000000000 WMASK2: 0000000000000000 TBASE2: 0000000000000000 IVRPRIA: 0000002400000000 HAEO_3: 0000000000000000 HAEO_4: 0000000000000003 Memory Module 0 CSRs: ERR: 0000000000000000 CTRAP1: E2000008E2000008 CTRAP2: 00203E8B40203E8B CONFIG: 8005506880055068 EDCSTAT1:0C1407860C140C04 EDCSTAT2:000000170000000D EDCCTRL: 2000000020000000 SB_CTRL: 0000080000000800 REF_CTRL:000001D8000001D8 Memory Module 1 CSRs: ERR: 0000000000000000 CTRAP1: E2400008E2400008 CTRAP2: 00203E8B40203E8B CONFIG: 8015506980155069 EDCSTAT1:082D01550D190356 EDCSTAT2:000000170000000D EDCCTRL: 2000000020000000 SB_CTRL: 0000080000000800 REF_CTRL:000001D8000001D8 Process powerup, pcb = 00027E80 pc: 0000000000080018 ps: 3000000000000004 r2: 0000000000130F5C r5: 00000000000F64CC r3: 00000000000224F4 r6: 0000000000000015 r4: 0000000000000060 r7: 0000000000000000 exception context saved starting at 00029C40 GPRs: 0: 00000000 00000000 16: 00000000 00000004 1: 00000000 00000004 17: 00000000 00000000 2: 00000000 0010E080 18: 00000000 00000020 3: 00000000 00000004 19: 00000000 00000000 4: 00000000 000F63D0 20: 00000000 00000021 5: 00000000 000F64CC 21: 00000000 00000000 6: 00000000 00000015 22: 00000000 000F3B60 7: 00000000 00000000 23: 00000000 00000000 8: 00000000 00000000 24: 00000000 0009AEC9 9: 00000000 00000000 25: 00000000 00000001 10: 00000000 00000000 26: 00000000 0005A360 11: 00000000 00000000 27: 00000000 0010B428 12: 00000000 00000000 28: 00000000 00136190 13: 00000000 00000000 29: 00000000 00029DB0 14: 00000000 00000000 30: 00000000 00029DB0 15: 00000000 00000000 dump of active call frames: PC = 00080014 PD = 0010E080 FP = 00029DB0 SP = 00029DB0 R2 R3 R4 R5 R6 R29 saved starting at 00029DB8 R2 = 0010E420 R3 = 00000000 R4 = 00000001 R5 = 000F0F98 R6 = 00000000 R29 = 00029E40 PC = 0006D460 PD = 0010E420 FP = 00029E40 SP = 00029DF0 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R29 saved starting at 00029FC8 R2 = 0010D1E0 R3 = 00027E80 R4 = 00028050 R5 = 00000000 R6 = 00000000 R7 = 00000000 R8 = 00000000 R9 = 00000000 R10 = 00000000 R11 = 00000000 R29 = 0002A030 PC = 00070C70 PD = 0010D1E0 FP = 0002A030 SP = 00029FE0 R2 R3 R4 R29 saved starting at 0002A038 R2 = 00000000 R3 = 00000000 R4 = 00000000 R29 = 00000000 starting console on CPU 1 starting console on CPU 2 os_type: UNIX - console CIPCA driver not started Memory Testing and Configuration Status Module Size Base Addr Intlv Mode Intlv Unit Status ------ ----- --------- ---------- ---------- ------ 0 512MB 00000000 2-Way 0 Passed 1 512MB 00000000 2-Way 1 Passed Total Bad Pages 0 AlphaServer 2100A Console V5.3-14, built on Oct 16 1998 at 15:28:19 CPU 0 booting (boot dka100.1.0.2001.0 -flags 0) block 0 of dka100.1.0.2001.0 is a valid boot block reading 15 blocks from dka100.1.0.2001.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 3fff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Loading /boot/loader Console: SRM firmware console VMS PAL rev: 0x4000300010114 OSF PAL rev: 0x4000100020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 1.0 (murphyp1@bsdalpha.ais.msu.edu, Wed Aug 29 22:01:05 EDT 2001) Memory: 1048576 k Loading /boot/defaults/loader.conf /kernel data=0x3f1a80+0x2a9c0 - halted CPU 0 halt code = 2 kernel stack not valid halt PC = 200000000 boot failure P00>>>halt CPU 0 is halted P00>>>halt 0 CPU 0 is halted P00>>>halt 12 invalid processor ID P00>>>P00>>>halt 12P00>>> invalid processor ID P00>>>halt 1 CPU 1 is halted P00>>>halt 2 CPU 2 is halted P00>>>shoewP00>>>P00>>>sshoewhshoewoshoewwshoew shoewdshoeweshoewvshoew P00>>>show dev dka0.0.0.2001.0 DKA0 RZ28D 0010 dka100.1.0.2001.0 DKA100 RZ28D 0010 dka500.5.0.2001.0 DKA500 RRD45 0436 dra0.0.0.2006.0 DRA0 3 Member RAID 5 dra1.0.0.2006.0 DRA1 3 Member RAID 5 drb0.0.0.6.0 DRB0 7 Member RAID 5 drb1.0.0.6.0 DRB1 7 Member RAID 0 drb2.0.0.6.0 DRB2 7 Member RAID 0 dva0.0.0.1000.0 DVA0 RX26/RX23 mka600.6.0.2001.0 MKA600 TLZ07 553B ewa0.0.0.2007.0 EWA0 00-00-F8-01-81-09 ewb0.0.0.7.0 EWB0 00-00-F8-01-84-89 pka0.7.0.2001.0 PKA0 SCSI Bus ID 7 P00>>> >How-To-Repeat: Just reboot the 5.0-CURRENT GENERIC kernel. >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200109041226.f84CQtn74339>