From owner-freebsd-hardware  Thu Jan 16 03:42:52 1997
Return-Path: <owner-hardware>
Received: (from root@localhost)
          by freefall.freebsd.org (8.8.4/8.8.4) id DAA17366
          for hardware-outgoing; Thu, 16 Jan 1997 03:42:52 -0800 (PST)
Received: from relay.perceval.net (relay.perceval.net [194.183.224.20])
          by freefall.freebsd.org (8.8.4/8.8.4) with SMTP id DAA17360
          for <freebsd-hardware@freebsd.org>; Thu, 16 Jan 1997 03:42:47 -0800 (PST)
Received: (from fpollet@localhost) by relay.perceval.net (8.6.11/8.6.9) id MAA23258 for freebsd-hardware@freebsd.org; Thu, 16 Jan 1997 12:42:41 +0100
Date: Thu, 16 Jan 1997 12:42:41 +0100
From: Francois Pollet <fpollet@relay.perceval.net>
Message-Id: <199701161142.MAA23258@relay.perceval.net>
To: freebsd-hardware@freebsd.org
Subject: ASUS T2P4 and Adaptec 2940AU
Sender: owner-hardware@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk


Troubles in reboot with 2.1.6-RELEASE

ASUS P55T2P4 bios 1.08
AHA2940AU bios 1.21
Seagate ST32155N 2.1Gb firmware 0532 with a FreeBSD only partition and
standard MBR

No problems during installation, geometry used is the geometry reported
by a DOS fdisk (261/255/63), no errors reported during installation

Everything works perfectly after a power on

2940AU hangs and fails to detect SCSI devices after a soft or a hard reboot
A real power on is always required to restart the machine

First I thought it was a compatibility problem between the T2P4 and the 2940AU
but it seems to work fine with a DOS only partition

Can somebody help ?

Francois Pollet