Date: Fri, 1 Aug 2003 08:54:14 +0000 From: Alexander.Farber@t-online.de (Alexander Farber) To: freebsd-isdn@freebsd.org Subject: Fritz PCI card bot visible in dmesg of FreeBSD 5.1? Message-ID: <20030801085413.GA1435@pref.my.domain>
next in thread | raw e-mail | index | archive | help
Hi, I'm a FreeBSD newbie, but have used OpenBSD before. I'm trying to use the "Fritz! PCI" ISDN card by AVM ( http://www.avm.de/de/index.html?Produkte/FRITZ/FRITZ_Card_PCI/ ) in my PC with FreeBSD 5.1-RELEASE and after reading the http://people.freebsd.org/~hm/i4b-1001/ have added: device ifpi device "i4bq921" device "i4bq931" device "i4b" device "i4btrc" 4 device "i4bctl" device "i4brbch" 4 device "i4btel" 4 device "i4bipr" 4 device "i4bisppp" 4 to my config file (attached at the bottom of this mail). Compared to the manual I had to change "device ipfi 1" to just "device ifpi" and all "pseudo-device" to "device" - because otherwise the config would complain. Also I've got these warning from config tool: FYI: static unit limits for i4btrc are set: NI4BTRC=4 FYI: static unit limits for i4brbch are set: NI4BRBCH=4 FYI: static unit limits for i4btel are set: NI4BTEL=4 FYI: static unit limits for i4bipr are set: NI4BIPR=4 FYI: static unit limits for i4bisppp are set: NI4BISPPP=4 Kernel build directory is ../compile/GENERIC.isdn Don't forget to do a ``make depend'' but the kernel has built and booted fine. However now I only see the "psedo-devices" in the dmesg output but not the "ifpi"-card itself (full dmesg attached at the bottom): i4btel: 4 ISDN telephony interface device(s) attached i4bipr: 4 IP over raw HDLC ISDN device(s) attached i4bctl: ISDN system control port attached i4bisppp: 4 ISDN SyncPPP device(s) attached i4b: ISDN call control device attached i4btrc: 4 ISDN trace device(s) attached i4brbch: 4 raw B channel access device(s) attached Could anyone please write me, if I've done anything wrong? I've bought the Fritz PCI card few days ago, because I thought it would be well supported by the i4b... Thank you Alex ======================== # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.384.2.2 2003/05/31 15:18:41 scottl Exp $ machine i386 #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident GENERIC #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" #Default places to look for devices. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as root device, requires NFSCLIENT options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current #options DDB #Enable the kernel debugger #options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options! #device iir # Intel Integrated RAID #device mly # Mylex AcceleRAID/eXtremeRAID # SCSI peripherals device scbus # SCSI bus (required) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device amr # AMI MegaRAID #device ida # Compaq Smart RAID #device ips # IBM (Adaptec) ServeRAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # Pcmcia and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pcic # ExCA ISA and PCI bridges #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x and SK-982x gigabit ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') device bge # Broadcom BCM570xx Gigabit Ethernet # ISA Ethernet NICs. pccard nics included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of ethernet chips #device xe # Xircom pccard ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards #device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard #device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device axe # ASIX Electronics USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) # ISDN support device ifpi device "i4bq921" device "i4bq931" device "i4b" device "i4btrc" 4 device "i4bctl" device "i4brbch" 4 device "i4btel" 4 device "i4bipr" 4 device "i4bisppp" 4 ====================== Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Fri Aug 1 00:08:47 GMT 2003 root@newhope.my.domain:/usr/src/sys/i386/compile/GENERIC.isdn Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e4000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e4244. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2000085424 Hz CPU: AMD Athlon(TM) XP 2400+ (2000.09-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 536854528 (511 MB) avail memory = 516210688 (492 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS A7V8X > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f2080 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <network, ethernet> at device 9.0 (no driver attached) pci0: <network> at device 11.0 (no driver attached) pci0: <multimedia, audio> at device 14.0 (no driver attached) fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xd000-0xd03f mem 0xec000000-0xec0fffff,0xec800000-0xec800fff irq 7 at device 15.0 on pci0 fxp0: Ethernet address 00:02:b3:1a:eb:57 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 9 at device 16.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 16.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ugen0: WACOM ET-0405-UV1.1-1, rev 1.00/1.11, addr 2 uhci2: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 16.2 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 16.3 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0xa800-0xa80f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <multimedia, audio> at device 17.5 (no driver attached) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcc7ff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec i4btel: 4 ISDN telephony interface device(s) attached i4bipr: 4 IP over raw HDLC ISDN device(s) attached i4bctl: ISDN system control port attached i4bisppp: 4 ISDN SyncPPP device(s) attached i4b: ISDN call control device attached i4btrc: 4 ISDN trace device(s) attached i4brbch: 4 raw B channel access device(s) attached ad0: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata0-master UDMA100 ad1: 39083MB <Maxtor 6Y040L0> [79408/16/63] at ata0-slave UDMA133 ad2: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-master UDMA100 acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8160B> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030801085413.GA1435>