Date: Tue, 22 Jun 1999 16:17:46 -0500 (CDT) From: "Andre M. Hedrick" <hedrick@Astro.Dyer.Vanderbilt.Edu> To: Patrick Gardella <patrick@cre8tivegroup.com> Cc: apcupsd-devel@ro.com, freebsd-questions@freebsd.org Subject: Re: PANIC: Cannot talk to UPS! Message-ID: <Pine.LNX.3.96.990622161207.5355A-100000@Astro.Dyer.Vanderbilt.Edu> In-Reply-To: <XFMail.990622085300.patrick@cre8tivegroup.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 22 Jun 1999, Patrick Gardella wrote: > I recently purchased another APC UPS (APC BackUPS Pro 280) for a machine > here in the office. When I went to run a known working copy of > apcupsd, it failed with a "PANIC! Cannot talk to UPS" error. I've set > the /etc/apcupsd.conf file correctly (UPSTYPE backupspro, UPSCABLE > 940-0024B DEVICE /dev/ttyd0). What is DEVICE /dev/ttyd0 ?? Is this a raw serial device in FreeBSD? If the daemon can not setserial to 2400, then you will need to do this with an external tool before you call the daemon. > Some specifics: > APC UPS BackUPS-Pro 280 > FreeBSD 3.2-STABLE > Serial Port= /dev/ttyd0 (on linux, this would be /dev/ttyS0) Is there a lockpath problem that I do not know about? > The serial port is correctly detected by the kernel: > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A Andre Hedrick The Linux IDE guy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.96.990622161207.5355A-100000>