Date: Mon, 18 Jul 2005 10:50:57 +0200 From: Jonathan Weiss <jw@innerewut.de> To: FreeBSD-Stable <freebsd-stable@freebsd.org> Subject: Re:RELENG_6 has problems with booting Message-ID: <BF013A11.2C3D1%jw@innerewut.de> In-Reply-To: <BF006B98.2C2CD%jw@innerewut.de>
next in thread | previous in thread | raw e-mail | index | archive | help
>
>> What happens if you drop ATAPICAM and do you have a good reason why you
>> are including GEOM_BDE?
>>
>> Thanks
>> S.
>
> I will try a kernel without ATAPICAM.
>
> I need GEOM_BDE for my encrypted disk but I can also try a kernel without
> it.
A kernel without ATAPICAM will also result in a hang during normal/verbose
boot.
With a kernel without GEOM_BDE I'm able to boot normally but the machine
hanged some minutes later. Again no panic, the machine just hangs.
When I do a boot in safe mode, everything is ok.
Attachted is the dmesg from the verbose boot.
Jonathan
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: <ACPI PCI Link LUBA> irq 12 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 12 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 12 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: <ACPI PCI Link LUBB> irq 11 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: <ACPI PCI Link LMAC> irq 11 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link8: <ACPI PCI Link LAPU> on acpi0
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link9: <ACPI PCI Link LACI> irq 12 on acpi0
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 12 N 0 3 4 5 6 7 10 11 12 14 15
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 12 N 0 3 4 5 6 7 10 11 12 14 15
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link10: <ACPI PCI Link LMCI> on acpi0
pci_link10: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link10: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link10: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link11: <ACPI PCI Link LSMB> irq 5 on acpi0
pci_link11: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link11: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link11: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link12: <ACPI PCI Link LUB2> irq 5 on acpi0
pci_link12: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link12: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link12: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link13: <ACPI PCI Link LFIR> on acpi0
pci_link13: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link13: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link13: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link14: <ACPI PCI Link L3CM> on acpi0
pci_link14: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link14: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link14: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link15: <ACPI PCI Link LIDE> on acpi0
pci_link15: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link15: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link15: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link16: <ACPI PCI Link APC1> irq 16 on acpi0
pci_link16: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link16: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link16: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16
pci_link17: <ACPI PCI Link APC2> irq 17 on acpi0
pci_link17: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 17 N 0 17
pci_link17: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 17 N 0 17
pci_link17: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 17
pci_link18: <ACPI PCI Link APC3> irq 18 on acpi0
pci_link18: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 18 N 0 18
pci_link18: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 18 N 0 18
pci_link18: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 18
pci_link19: <ACPI PCI Link APC4> irq 19 on acpi0
pci_link19: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 19 N 0 19
pci_link19: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 19 N 0 19
pci_link19: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 19
pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link20: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link20: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link20: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16
pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link21: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link21: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link21: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link22: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link22: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link22: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link23: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link23: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link23: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link24: <ACPI PCI Link APCI> irq 0 on acpi0
pci_link24: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link24: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link24: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link25: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link25: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link25: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link25: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link26: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link26: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link26: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link26: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link27: <ACPI PCI Link APCS> irq 23 on acpi0
pci_link27: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 23 N 0 23
pci_link27: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 23 N 0 23
pci_link27: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 23
pci_link28: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link28: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link28: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link28: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link29: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link29: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link29: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link29: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link30: <ACPI PCI Link AP3C> irq 0 on acpi0
pci_link30: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link30: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link30: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link31: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link31: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link31: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link31: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
ACPI timer: 1/1 1/2 1/2 1/1 1/1 1/1 1/1 1/1 1/2 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x10de, dev=0x01e0, revid=0xc1
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base d8000000, size 26, enabled
found-> vendor=0x10de, dev=0x01ea, revid=0xc1
bus=0, slot=0, func=1
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x01ee, revid=0xc1
bus=0, slot=0, func=2
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x01ed, revid=0xc1
bus=0, slot=0, func=3
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x01ec, revid=0xc1
bus=0, slot=0, func=4
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x01ef, revid=0xc1
bus=0, slot=0, func=5
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0060, revid=0xa4
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0064, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e400, size 5, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.APCS:0)
ioapic0: Changing polarity for pin 23 to high
pcib0: slot 1 INTA routed to irq 23 via \\_SB_.PCI0.APCS
found-> vendor=0x10de, dev=0x0067, revid=0xa4
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0003000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.APCF:0)
pci_link21: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 2 INTA routed to irq 20 via \\_SB_.PCI0.APCF
found-> vendor=0x10de, dev=0x0067, revid=0xa4
bus=0, slot=2, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0004000, size 12, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.APCG:0)
pci_link22: Picked IRQ 21 with weight 0
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 2 INTB routed to irq 21 via \\_SB_.PCI0.APCG
found-> vendor=0x10de, dev=0x0068, revid=0xa4
bus=0, slot=2, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0005000, size 8, enabled
pcib0: matched entry for 0.2.INTC (src \\_SB_.PCI0.APCL:0)
pci_link28: Picked IRQ 22 with weight 0
ioapic0: Changing polarity for pin 22 to high
pcib0: slot 2 INTC routed to irq 22 via \\_SB_.PCI0.APCL
found-> vendor=0x10de, dev=0x0066, revid=0xa1
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0000000, size 12, enabled
map[14]: type 4, range 32, base 0000d000, size 3, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APCH:0)
pci_link23: Picked IRQ 20 with weight 1
pcib0: slot 4 INTA routed to irq 20 via \\_SB_.PCI0.APCH
found-> vendor=0x10de, dev=0x006a, revid=0xa1
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000d800, size 7, enabled
map[18]: type 1, range 32, base e0001000, size 12, enabled
pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.APCJ:0)
pci_link25: Picked IRQ 21 with weight 1
pcib0: slot 6 INTA routed to irq 21 via \\_SB_.PCI0.APCJ
found-> vendor=0x10de, dev=0x006c, revid=0xa3
bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0065, revid=0xa2
bus=0, slot=9, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x10de, dev=0x01e8, revid=0xc1
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at device
0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd8000000
agp0: allocating GATT for aperture of size 64M
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0:1:1: Transition from D0 to D3
ohci0: <OHCI (generic) USB controller> mem 0xe0003000-0xe0003fff irq 20 at
device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0003000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe0004000-0xe0004fff irq 21 at
device 2.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0004000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0005000-0xe00050ff irq 22
at device 2.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe0005000
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
ulpt0: Brother HL-5040, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd000-0xd007 mem
0xe0000000-0xe0000fff irq 20 at device 4.0 on pci0
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0000000
nve0: Ethernet address 00:0c:6e:57:5a:25
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: bpf attached
nve0: Ethernet address: 00:0c:6e:57:5a:25
nve0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pci0:6:0: Transition from D0 to D3
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xde000000-0xdfffffff
pcib1: prefetched decode 0xfff00000-0xfffff
ACPI: Found matching pin for 0.6.INTA at func 0: 21
pci_link16: BIOS IRQ 21 for 0.6.INTA is invalid
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10ec, dev=0x8029, revid=0x00
bus=1, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type 4, range 32, base 0000c000, size 5, enabled
pcib1: (null) requested I/O range 0xc000-0xc01f: in range
pcib1: matched entry for 1.8.INTA (src \\_SB_.PCI0.APC3:0)
ioapic0: Changing polarity for pin 18 to high
pcib1: slot 8 INTA routed to irq 18 via \\_SB_.PCI0.APC3
found-> vendor=0x1282, dev=0x9102, revid=0x31
bus=1, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000
ns)
intpin=a, irq=12
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000c400, size 8, enabled
pcib1: (null) requested I/O range 0xc400-0xc4ff: in range
map[14]: type 1, range 32, base df000000, size 8, enabled
pcib1: (null) requested memory range 0xdf000000-0xdf0000ff: good
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.APC1:0)
ioapic0: Changing polarity for pin 16 to high
pcib1: slot 10 INTA routed to irq 16 via \\_SB_.PCI0.APC1
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc000-0xc01f irq 18 at
device 8.0 on pci1
ed0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc000
ed0: [GIANT-LOCKED]
ed0: bpf attached
ed0: Ethernet address: 00:a0:d2:14:f5:33
ed0: if_start running deferred for Giant
ed0: type NE2000 (16 bit)
dc0: <Davicom DM9102A 10/100BaseTX> port 0xc400-0xc4ff mem
0xdf000000-0xdf0000ff irq 16 at device 10.0 on pci1
dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc400
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: OUI 0x00606e, model 0x0004, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:80:ad:04:c6:78
dc0: if_start running deferred for Giant
dc0: [GIANT-LOCKED]
atapci0: <nVidia nForce2 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xdc000000-0xddffffff
pcib2: prefetched decode 0xd0000000-0xd7ffffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x10de, dev=0x0110, revid=0xa1
bus=2, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dc000000, size 24, enabled
pcib2: (null) requested memory range 0xdc000000-0xdcffffff: good
map[14]: type 3, range 32, base d0000000, size 27, enabled
pcib2: (null) requested memory range 0xd0000000-0xd7ffffff: good
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.APC4:0)
ioapic0: Changing polarity for pin 19 to high
pcib2: slot 0 INTA routed to irq 19 via \\_SB_.PCI0.APC4
pci2: <display, VGA> at device 0.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
sio0: irq maps: 0x1821 0x1831 0x1821 0x1821
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: irq maps: 0x1821 0x1829 0x1821 0x1821
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ed: ed0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
unknown: status reg test failed fe
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcd7ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 166364231 hz
Timecounter "TSC" frequency 1830009538 Hz quality 800
Timecounters tick every 1.000 msec
pflog0: bpf attached
lo0: bpf attached
pfsync0: bpf attached
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on nVidia nForce2 chip
ad0: setting UDMA100 on nVidia nForce2 chip
ad0: 76319MB <WDC WD800JB-00FSA0 77.07W77> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: nVidia check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad1: setting PIO4 on nVidia nForce2 chip
ad1: setting UDMA100 on nVidia nForce2 chip
ad1: 190782MB <WDC WD2000BB-14GUA0 08.02D08> at ata0-slave UDMA100
ad1: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue
ad1: nVidia check1 failed
ad1: Adaptec check1 failedGEOM: new disk ad1
ad1: LSI (v3) check1 failed
ad1: LSI (v2) check1 failed
ad1: FreeBSD check1 failed
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=BIOSDMA cable=40 wire
acd0: setting PIO4 on nVidia nForce2 chip
acd0: <LITE-ON LTR-12101B/LS3B> CDRW drive at ata1 as master
acd0: read 5512KB/s (5512KB/s) write 2067KB/s (2067KB/s), 2048KB buffer,
PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: setting PIO4 on nVidia nForce2 chip
acd1: setting UDMA33 on nVidia nForce2 chip
acd1: <TOSHIBA DVD-ROM SD-M1712/1004> DVDROM drive at ata1 as slave
acd1: read 8268KB/s (8268KB/s), 128KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd1: Writes:
acd1: Audio: play, 16 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ATA PseudoRAID loaded
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
tun0: bpf attached
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
Linux ELF exec handler installed
--
Jonathan Weiss
http://blog.innerewut.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BF013A11.2C3D1%jw>