Date: Fri, 09 May 2014 17:18:21 +0200 From: Lokadamus <lokadamus@gmx.de> To: =?ISO-8859-1?Q?=22Leonardo_M=2E_Ram=E9=22?= <martinrame@yahoo.com> Cc: =?ISO-8859-1?Q?=22Leonardo_M=2E_Ram=E9_via_freebsd-questions=22?= <freebsd-questions@freebsd.org> Subject: Re: Disk errors Message-ID: <536CF1BD.1070200@gmx.de> In-Reply-To: <1399488903.18091.YahooMailNeo@web126201.mail.ne1.yahoo.com> References: <1399488903.18091.YahooMailNeo@web126201.mail.ne1.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Too long time to response? http://forums.freenas.org/index.php?threads/cam-errors-icrc-abrt-drd-serv-err.17369/ https://www.google.de/search?q=ATA+status%3A+51+(DRDY+SERV+ERR)%2C+error%3A+84+(ICRC+ABRT+) Greetings Am 07.05.2014 20:55, schrieb Leonardo M. Ramé via freebsd-questions: > Hi, since a couple or days ago I noted my home server was taking too long to boot. After issuing a dmesg I got this: > > ... > > (ada0:ata2:0:0:0): READ_DMA. ACB: c8 00 27 db 5a 40 00 00 00 00 01 00 > (ada0:ata2:0:0:0): CAM status: ATA Status Error > (ada0:ata2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT ) > (ada0:ata2:0:0:0): RES: 51 84 27 db 5a 00 00 00 00 01 00 > (ada0:ata2:0:0:0): Retrying command > (ada0:ata2:0:0:0): READ_DMA. ACB: c8 00 7f 4b 4f 40 00 00 00 00 11 00 > (ada0:ata2:0:0:0): CAM status: ATA Status Error > (ada0:ata2:0:0:0): ATA > status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT ) > (ada0:ata2:0:0:0): RES: 51 84 7f 4b 4f 00 00 00 00 11 00 > (ada0:ata2:0:0:0): Retrying command > > Then I performed a smart control on that drive: > > > sudo /usr/local/sbin/smartctl -t long /dev/ada0 > > > Here's the output of sudo /usr/local/sbin/smartctl -a /dev/ada0: > > > -------------------------------------------------------------------------------------------------------------- > smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-RELEASE amd64] (local build) > Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org > > === START OF INFORMATION SECTION === > Model Family: Western Digital Caviar Green > Device Model: > WDC WD7500AADS-00L5B1 > Serial Number: WD-WCAU4A883181 > LU WWN Device Id: 5 0014ee 101cce510 > Firmware Version: 01.01A01 > User Capacity: 750,156,374,016 bytes [750 GB] > Sector Size: 512 bytes logical/physical > Device is: In smartctl database [for details use: -P show] > ATA Version is: ATA8-ACS (minor revision not indicated) > SATA Version is: SATA 2.5, 3.0 Gb/s > Local Time is: Wed May 7 07:05:07 2014 ART > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x84) Offline data collection activity > was suspended by an interrupting command from host. > Auto Offline Data Collection: Enabled. > Self-test execution status: ( 0) The previous self-test routine completed > without error or no self-test has ever > > been run. > Total time to complete Offline > data collection: (19500) seconds. > Offline data collection > capabilities: (0x7b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: > (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 225) minutes. > Conveyance self-test routine > recommended polling time: ( 5) minutes. > SCT capabilities: (0x303f) SCT Status supported. > SCT Error Recovery Control supported. > > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 > 3 > Spin_Up_Time 0x0027 193 156 021 Pre-fail Always - 5333 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 983 > 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 > 7 Seek_Error_Rate 0x002e 100 253 000 Old_age > Always - 0 > 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 17593 > 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 > 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 > 12 Power_Cycle_Count 0x0032 > 100 100 000 Old_age Always - 981 > 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 43 > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 983 > 194 Temperature_Celsius 0x0022 105 092 000 Old_age Always - 45 > 196 Reallocated_Event_Count 0x0032 > 200 200 000 Old_age Always - 0 > 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 > 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 4455 > 200 Multi_Zone_Error_Rate 0x0008 200 > 200 000 Old_age Offline - 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error > # 1 Extended offline Completed without error 00% 17584 - > # 2 Short offline Completed without error 00% > 17580 - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 > 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > -------------------------------------------------------------------------------------------------------------- > > Aparently the disk has no errors, what can be causing the errors shown in dmesg?. > > I'm using this: FreeBSD server.rame.local 9.1-RELEASE FreeBSD 9.1-RELEASE > #0 r243825: Tue Dec 4 09:23:10 UTC 2012 > root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?536CF1BD.1070200>