From owner-freebsd-stable Fri Apr 5 11:30:34 2002 Delivered-To: freebsd-stable@freebsd.org Received: from one.net (ip-216-23-54-92.adsl.one.net [216.23.54.92]) by hub.freebsd.org (Postfix) with SMTP id 4061A37B417 for ; Fri, 5 Apr 2002 11:30:28 -0800 (PST) Received: (qmail 40083 invoked by uid 1001); 5 Apr 2002 19:31:03 -0000 Date: Fri, 5 Apr 2002 14:31:02 -0500 From: Coleman Kane To: marius@alchemy.franken.de Cc: jwh0014@unt.edu, stable@FreeBSD.ORG Subject: Re: Panic on Boot w/ Tyan 2466N Message-ID: <20020405143102.B39977@freebsd.org> References: <1018027770.3caddefac352b@eaglemail.unt.edu> <20020405203537.A24010@newtrinity.default-network.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020405203537.A24010@newtrinity.default-network.net> User-Agent: Mutt/1.3.22.1i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have this board, running two 1900 MP's and was able to run the installer properly. I have been having problems vs. the APIC's, PIC's, and interrupt servicing in general. I don't think the BIOS properly sets up (or FreeBSD perhaps) the I/O APIC and the MP tables in RAM. Of note is the mptable output, which shows only 16 INT lines routed and all of them ISA. The whole system, minus the 66Mhz PCI64 slots are connected via PCI-PCI bridges. In fact, there are 3 PCI busses on the board itself as well as the LPC bridge. I don't know enough about intel's MP1.4 spec, but I may try to figure it out this weekend. -- coleman On Fri, Apr 05, 2002 at 08:35:37PM +0200, marius@alchemy.franken.de wrote: > On Fri, Apr 05, 2002 at 11:29:30AM -0600, jwh0014@unt.edu wrote: > > To Whom It May Concern, > > > > I am running a Tyan S2466N with a single processor and receive the following > > panic upon booting from the FreeBSD 4.2-RELEASE disc: > > > > panic: resource_list_alloc: resource entry is busy > > > > Which device is this refering to and how can I fix this? > > > > did you try to run a smp enabled kernel ? > i'm running 4-stable on a tyan s2462, when i tried to install 4.4-release > an up kernel also simply refused to run (i can't remember the exact > problem) but it worked with a smp kernel. > i think this is apic related and apic is turned on in smp kernels. > a while ago there was suggested on freebsd-smp to compile the kernel with > DISABLE_PSE for (tyan) k7 dual boards but i'm not aware of it's effect > nor did i try that. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message