Date: Tue, 20 Aug 2002 14:33:29 +0800 (CST) From: =?gb2312?q?=D6=BE=D2=A2=20=C0=EE?= <zhiyaoli@yahoo.com.cn> To: freebsd-questions@freebsd.org Subject: Problems with my dial-in server Message-ID: <20020820063329.44936.qmail@web20204.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
My FreeBSD 4.5 box can access to internet with static
IP(202.x.x.x), and I want to set up a dial-in server
as a gateway on it, but I failed.
I can dial in and get connection to the server from an
other FreeBSD box.
During the connection, I can access nobody but
202.x.x.x 10.0.0.1 10.0.0.2.
And after the disconnet the server, the server will
became deaf.
What's the matter with my ppp?
Thanks in advance.
The configurations are following:
user ppp belongs to group network, and its shell is
/etc/ppp/ppplogin.
----------------------------------------------
/etc/rc.conf
gateway_enable="YES"
----------------------------------------------
/etc/gettytab
default:\
:cb:ce:ck:lc:fd#1000:im=\r\ns/m (h) (t)
\r\n\r\n:sp#1200:\
:if=/etc/issue:\
:pp=/etc/ppp/ppplogin:
----------------------------------------------
/etc/ttys
ttyd0 "/usr/libexec/getty std.19200" dialup on secure
----------------------------------------------
/etc/ppp.conf
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
set device /dev/cuaa0
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T
TIMEOUT 40 CONNECT"
set timeout 0
disable pred1 deflate lqr
deny pred1 deflate lqr
add default HISADDR
papchap:
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0
0.0.0.0
add default HISADDR # Add a (sticky) default route
incoming:
enable passwdauth
enable proxy
allow users ppp
set dns 202.96.x.x
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0
-----------------------------------------------
ppp.log
Jul 12 14:53:21 mail ppp[142]: Phase: Using interface:
tun0
Jul 12 14:53:21 mail ppp[142]: Phase: deflink: Created
in closed state
Jul 12 14:53:21 mail ppp[142]: tun0: Command: default:
ident user-ppp VERSION (built COMPILATIONDATE)
Jul 12 14:53:21 mail ppp[142]: tun0: Command: default:
set device /dev/cuaa0
Jul 12 14:53:21 mail ppp[142]: tun0: Command: default:
set speed 115200
Jul 12 14:53:21 mail ppp[142]: tun0: Command: default:
set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5
"" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40
CONNECT
Jul 12 14:53:21 mail ppp[142]: tun0: Command: default:
set timeout 0
Jul 12 14:53:21 mail ppp[142]: tun0: Command: default:
disable pred1 deflate lqr
Jul 12 14:53:21 mail ppp[142]: tun0: Command: default:
deny pred1 deflate lqr
Jul 12 14:53:21 mail ppp[142]: tun0: Command: default:
add default HISADDR
Jul 12 14:53:21 mail ppp[142]: tun0: Command:
incoming: enable passwdauth
Jul 12 14:53:21 mail ppp[142]: tun0: Command:
incoming: enable proxy
Jul 12 14:53:21 mail ppp[142]: tun0: Command:
incoming: set dns x.x.x.x
Jul 12 14:53:21 mail ppp[142]: tun0: Command:
incoming: set ifaddr 10.0.0.1/0 10.0.0.2/0
255.255.255.0
Jul 12 14:53:21 mail ppp[142]: tun0: Phase: PPP
Started (direct mode).
Jul 12 14:53:21 mail ppp[142]: tun0: Phase: bundle:
Establish
Jul 12 14:53:21 mail ppp[142]: tun0: Phase: deflink:
closed -> opening
Jul 12 14:53:21 mail ppp[142]: tun0: Phase: deflink:
Connected!
Jul 12 14:53:21 mail ppp[142]: tun0: Phase: deflink:
opening -> carrier
Jul 12 14:53:22 mail ppp[142]: tun0: Phase: deflink:
/dev/ttyd0: CD detected
Jul 12 14:53:22 mail ppp[142]: tun0: Phase: deflink:
carrier -> lcp
Jul 12 14:53:22 mail ppp[142]: tun0: LCP: FSM: Using
"deflink" as a transport
Jul 12 14:53:22 mail ppp[142]: tun0: LCP: deflink:
State change Initial --> Closed
Jul 12 14:53:22 mail ppp[142]: tun0: LCP: deflink:
State change Closed --> Stopped
Jul 12 14:53:23 mail ppp[142]: tun0: LCP: deflink:
LayerStart
Jul 12 14:53:23 mail ppp[142]: tun0: LCP: deflink:
SendConfigReq(1) state = Stopped
Jul 12 14:53:23 mail ppp[142]: tun0: LCP: ACFCOMP[2]
Jul 12 14:53:23 mail ppp[142]: tun0: LCP:
PROTOCOMP[2]
Jul 12 14:53:23 mail ppp[142]: tun0: LCP: ACCMAP[6]
0x00000000
Jul 12 14:53:23 mail ppp[142]: tun0: LCP: MRU[4] 1500
Jul 12 14:53:23 mail ppp[142]: tun0: LCP: MAGICNUM[6]
0x61c77d36
Jul 12 14:53:23 mail ppp[142]: tun0: LCP: deflink:
State change Stopped --> Req-Sent
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: deflink:
RecvConfigReq(2) state = Req-Sent
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: ACCMAP[6]
0x000a0000
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: MAGICNUM[6]
0x01452b1b
Jul 12 14:53:24 mail ppp[142]: tun0: LCP:
PROTOCOMP[2]
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: ACFCOMP[2]
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: CALLBACK[3]
CBCP
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: deflink:
SendConfigRej(2) state = Req-Sent
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: CALLBACK[3]
CBCP
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: Sending
ident magic 61c77d36 text user-ppp 2.3.3 (built Jan 28
2002)
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: deflink:
SendIdent(0) state = Req-Sent
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: deflink:
RecvConfigReq(3) state = Req-Sent
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: ACCMAP[6]
0x000a0000
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: MAGICNUM[6]
0x01452b1b
Jul 12 14:53:24 mail ppp[142]: tun0: LCP:
PROTOCOMP[2]
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: ACFCOMP[2]
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: deflink:
SendConfigAck(3) state = Req-Sent
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: ACCMAP[6]
0x000a0000
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: MAGICNUM[6]
0x01452b1b
Jul 12 14:53:24 mail ppp[142]: tun0: LCP:
PROTOCOMP[2]
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: ACFCOMP[2]
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: deflink:
State change Req-Sent --> Ack-Sent
Jul 12 14:53:24 mail ppp[142]: tun0: LCP: deflink:
RecvCodeRej(4) state = Ack-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
SendConfigReq(1) state = Ack-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: ACFCOMP[2]
Jul 12 14:53:26 mail ppp[142]: tun0: LCP:
PROTOCOMP[2]
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: ACCMAP[6]
0x00000000
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: MRU[4] 1500
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: MAGICNUM[6]
0x61c77d36
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
RecvConfigAck(1) state = Ack-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
State change Ack-Sent --> Opened
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
LayerUp
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: Sending
ident magic 61c77d36 text user-ppp 2.3.3 (built Jan 28
2002)
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
SendIdent(1) state = Opened
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: FSM: Using
"deflink" as a transport
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: deflink:
State change Initial --> Closed
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: deflink:
LayerStart.
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: MPPE: Not
usable without CHAP81
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: deflink:
SendConfigReq(1) state = Closed
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: [EMPTY]
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: deflink:
State change Closed --> Req-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: Phase: deflink:
lcp -> open
Jul 12 14:53:26 mail ppp[142]: tun0: Phase: bundle:
Network
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: FSM: Using
"deflink" as a transport
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
State change Initial --> Closed
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
LayerStart.
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
SendConfigReq(1) state = Closed
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: IPADDR[6]
10.0.0.1
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP:
COMPPROTO[6] 16 VJ slots with slot compression
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
State change Closed --> Req-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
RecvConfigReq(1) state = Req-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP:
COMPPROTO[6] 16 VJ slots with slot compression
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: IPADDR[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: PRIDNS[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: PRINBNS[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: NBNS REQ -
rejected - nbns not set
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: SECDNS[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: SECNBNS[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: NBNS REQ -
rejected - nbns not set
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
SendConfigRej(1) state = Req-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: PRIDNS[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: PRINBNS[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: SECDNS[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: SECNBNS[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: Sending
ident magic 61c77d36 text user-ppp 2.3.3 (built Jan 28
2002)
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
SendIdent(2) state = Opened
Jul 12 14:53:26 mail ppp[142]: tun0: Phase: Unknown
protocol 0x803f (NETBIOS Framing Control Protocol)
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
SendProtocolRej(2) state = Opened
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: deflink:
RecvConfigReq(1) state = Req-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: MPPE[6]
value 0x00000001 ( bits, stateful, compressed)
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: MPPE: Not
usable without CHAP81
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: STAC[5]
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: deflink:
SendConfigRej(1) state = Req-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: MPPE[6]
value 0x00000001 ( bits, stateful, compressed)
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: STAC[5]
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: Sending
ident magic 61c77d36 text user-ppp 2.3.3 (built Jan 28
2002)
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
SendIdent(3) state = Opened
Jul 12 14:53:26 mail ppp[142]: tun0: LCP: deflink:
RecvCodeRej(5) state = Opened
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: deflink:
RecvConfigAck(1) state = Req-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: CCP: deflink:
State change Req-Sent --> Ack-Rcvd
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
RecvConfigAck(1) state = Req-Sent
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
State change Req-Sent --> Ack-Rcvd
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
RecvConfigReq(2) state = Ack-Rcvd
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP:
COMPPROTO[6] 16 VJ slots with slot compression
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: IPADDR[6]
0.0.0.0
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: deflink:
SendConfigNak(2) state = Ack-Rcvd
Jul 12 14:53:26 mail ppp[142]: tun0: IPCP: IPADDR[6]
10.0.0.2
Jul 12 14:53:27 mail ppp[142]: tun0: LCP: deflink:
RecvCodeRej(6) state = Opened
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink:
RecvConfigReq(2) state = Ack-Rcvd
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: [EMPTY]
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink:
SendConfigAck(2) state = Ack-Rcvd
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: [EMPTY]
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink:
State change Ack-Rcvd --> Opened
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink:
LayerUp.
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink: Out
= <0xffffffff>[-1], In = <0xffffffff>[-1]
Jul 12 14:53:27 mail ppp[142]: tun0: LCP: deflink:
RecvCodeRej(7) state = Opened
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP: deflink:
RecvConfigReq(3) state = Ack-Rcvd
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP:
COMPPROTO[6] 16 VJ slots with slot compression
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP: IPADDR[6]
10.0.0.2
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP: deflink:
SendConfigAck(3) state = Ack-Rcvd
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP:
COMPPROTO[6] 16 VJ slots with slot compression
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP: IPADDR[6]
10.0.0.2
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP: deflink:
State change Ack-Rcvd --> Opened
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP: deflink:
LayerUp.
Jul 12 14:53:27 mail ppp[142]: tun0: IPCP: myaddr
10.0.0.1 hisaddr = 10.0.0.2
Jul 12 14:53:27 mail ppp[142]: tun0: s
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink:
RecvTerminateReq(3) state = Opened
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink:
LayerDown.
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink:
SendTerminateAck(3) state = Opened
Jul 12 14:53:27 mail ppp[142]: tun0: CCP: deflink:
State change Opened --> Stopping
Jul 12 14:53:30 mail ppp[142]: tun0: CCP: deflink:
LayerFinish.
Jul 12 14:53:30 mail ppp[142]: tun0: CCP: deflink:
State change Stopping --> Stopped
Jul 12 14:54:15 mail ppp[142]: tun0: LCP: deflink:
RecvTerminateReq(8) state = Opened
Jul 12 14:54:15 mail ppp[142]: tun0: LCP: deflink:
LayerDown
Jul 12 14:54:15 mail ppp[142]: tun0: LCP: deflink:
SendTerminateAck(8) state = Opened
Jul 12 14:54:15 mail ppp[142]: tun0: LCP: deflink:
State change Opened --> Stopping
Jul 12 14:54:15 mail ppp[142]: tun0: CCP: deflink:
State change Stopped --> Closed
Jul 12 14:54:15 mail ppp[142]: tun0: CCP: deflink:
State change Closed --> Initial
Jul 12 14:54:15 mail ppp[142]: tun0: Phase: deflink:
open -> lcp
Jul 12 14:54:15 mail ppp[142]: tun0: IPCP: deflink:
LayerDown: 10.0.0.1
Jul 12 14:54:15 mail ppp[142]: tun0: IPCP: deflink:
State change Opened --> Starting
Jul 12 14:54:15 mail ppp[142]: tun0: IPCP: deflink:
LayerFinish.
Jul 12 14:54:15 mail ppp[142]: tun0: IPCP: Connect
time: 49 secs: 2899 octets in, 600 octets out
Jul 12 14:54:15 mail ppp[142]: tun0: IPCP: : 35
packets in, 10 packets out
Jul 12 14:54:15 mail ppp[142]: tun0: IPCP: total 71
bytes/sec, peak 376 bytes/sec on Fri Jul 12 14:54:15
2002
Jul 12 14:54:15 mail ppp[142]: tun0: IPCP: deflink:
State change Starting --> Initial
Jul 12 14:54:15 mail ppp[142]: tun0: Phase: bundle:
Terminate
Jul 12 14:54:18 mail ppp[142]: tun0: LCP: deflink:
LayerFinish
Jul 12 14:54:18 mail ppp[142]: tun0: LCP: deflink:
State change Stopping --> Stopped
Jul 12 14:54:18 mail ppp[142]: tun0: LCP: deflink:
State change Stopped --> Closed
Jul 12 14:54:18 mail ppp[142]: tun0: LCP: deflink:
State change Closed --> Initial
Jul 12 14:54:18 mail ppp[142]: tun0: Phase: deflink:
Disconnected!
Jul 12 14:54:18 mail ppp[142]: tun0: Phase: deflink:
Connect time: 57 secs: 3868 octets in, 1384 octets out
Jul 12 14:54:18 mail ppp[142]: tun0: Phase: deflink: :
232 packets in, 28 packets out
Jul 12 14:54:18 mail ppp[142]: tun0: Phase: total 92
bytes/sec, peak 384 bytes/sec on Fri Jul 12 14:54:18
2002
Jul 12 14:54:18 mail ppp[166]: tun0: Phase: deflink:
lcp -> closed
Jul 12 14:54:18 mail ppp[166]: tun0: Phase: bundle:
Dead
Jul 12 14:54:18 mail ppp[166]: tun0: Phase: PPP
Terminated (normal).
Jul 12 14:54:18 mail ppp[166]: tun0: Warning:
10.0.0.2: Cannot determine ethernet address for proxy ARP
_________________________________________________________
Do You Yahoo!?
新鲜到底,娱乐到家 - 雅虎推出免费娱乐电子周报!
http://cn.ent.yahoo.com/newsletter/index.html
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020820063329.44936.qmail>