Date: Sat, 27 Mar 2004 12:35:27 -0500 From: Joe Marcus Clarke <marcus@marcuscom.com> To: Jean-Yves Lignier <commercial.jyl@free.fr> Cc: FreeBSD GNOME Users <gnome@freebsd.org> Subject: Re: I need some help if possible (ORBit) Message-ID: <1080408926.35462.4.camel@shumai.marcuscom.com> In-Reply-To: <40659A4D.8090405@free.fr> References: <40659A4D.8090405@free.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-BmQmEKWwtA/VrTVu8l+M
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
On Sat, 2004-03-27 at 10:14, Jean-Yves Lignier wrote:
> Hello,
>=20
> I encountered some problems while trying to compile the sources of=20
> "mozilla-firebird".
> It seems that it comes from bus CORBA.
> In this e-mail, I am enclosing the logs of compilation.
> I thank you by advance for the assistance which you will want to bring=20
> to me well.
You need to install the latest version of devel/popt. I would also
highly recommend you cvsup your ports tree as firebird is now gone, and
replaced with firefox (0.8).
Joe
>=20
> Jean-Yves
>=20
> ______________________________________________________________________
> =3D=3D=3D> Extracting for mozilla-firebird-0.6.1_1
> >> Checksum OK for MozillaFirebird-source-0.6.1.tar.bz2.
>=20
> Extracting source (this takes a while) ...
>=20
> =3D=3D=3D> Patching for mozilla-firebird-0.6.1_1
> =3D=3D=3D> Applying FreeBSD patches for mozilla-firebird-0.6.1_1
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on executable: zip - found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on executable: freetype-con=
fig - found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on executable: gmake - foun=
d
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on executable: pkg-config -=
found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: jpeg.9 -=
found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: png.5 - =
found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: mng.1 - =
found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: freetype=
.9 - found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: iconv.3 =
- found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: nspr4.1 =
- found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: Xft.2 - =
found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: X11.6 - =
found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: glib12.3=
- found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: gtk12.2 =
- found
> =3D=3D=3D> mozilla-firebird-0.6.1_1 depends on shared library: ORBit.2 =
- not found
> =3D=3D=3D> Verifying install for ORBit.2 in /usr/ports/devel/ORBit
> =3D=3D=3D> Extracting for ORBit-0.5.17_1
> >> Checksum OK for gnome/ORBit-0.5.17.tar.bz2.
> =3D=3D=3D> Patching for ORBit-0.5.17_1
> =3D=3D=3D> Applying FreeBSD patches for ORBit-0.5.17_1
> =3D=3D=3D> ORBit-0.5.17_1 depends on executable: gmake - found
> =3D=3D=3D> ORBit-0.5.17_1 depends on file: /usr/local/libexec/libtool13=
/libtool - found
> =3D=3D=3D> ORBit-0.5.17_1 depends on executable: pkg-config - found
> =3D=3D=3D> ORBit-0.5.17_1 depends on shared library: intl.5 - found
> =3D=3D=3D> ORBit-0.5.17_1 depends on shared library: glib12.3 - found
> =3D=3D=3D> Configuring for ORBit-0.5.17_1
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...=20
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking how to run the C preprocessor... cc -E
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether to enable maintainer-specific portions of Makefiles... n=
o
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking for indentation command to pipe generated c-files through... cat
> checking for glib-config... /usr/local/bin/glib12-config
> checking for GLIB - version >=3D 1.2.1... yes
> checking for bison... no
> checking for byacc... byacc
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for mawk... no
> checking for gawk... no
> checking for nawk... nawk
> checking for ANSI C header files... yes
> checking for fcntl.h... yes
> checking for unistd.h... yes
> checking for sys/endian.h... yes
> checking for endian.h... no
> checking for machine/endian.h... yes
> checking for sys/machine.h... no
> checking for sys/isa_defs.h... no
> checking for sys/poll.h... yes
> checking for stddef.h... yes
> checking for wchar.h... yes
> checking for wcstr.h... no
> checking for wctype.h... yes
> checking for machine/types.h... yes
> checking for tcpd.h... yes
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... (cached) yes
> checking for size_t... yes
> checking for vprintf... yes
> checking for _doprnt... no
> checking for poll... yes
> checking for basename... yes
> checking for socket... yes
> checking for gethostbyname... yes
> checking for socklen_t... yes
> checking "whether to use TCP wrappers"... yes
> checking for inet_aton... yes
> checking whether byte ordering is bigendian... no
> checking how many vectors writev is capable to handle...=20
> 1024
> checking alignment of CORBA_short... 2
> checking alignment of CORBA_long... 4
> checking alignment of CORBA_unsigned_short... 2
> checking alignment of CORBA_unsigned_long... 4
> checking alignment of CORBA_float... 4
> checking alignment of CORBA_double... 4
> checking alignment of CORBA_char... 1
> checking alignment of CORBA_boolean... 1
> checking alignment of CORBA_octet... 1
> checking alignment of CORBA_long_double... 4
> checking alignment of CORBA_wchar... 2
> checking alignment of CORBA_long_long... 4
> checking alignment of CORBA_unsigned_long_long... 4
> checking alignment of CORBA_struct... 1
> checking alignment of CORBA_pointer... 4
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating orbit-config
> config.status: creating src/Makefile
> config.status: creating src/ORBitutil/Makefile
> config.status: creating src/ORBitutil/orbit-os-config.h
> config.status: creating src/IIOP/Makefile
> config.status: creating src/orb/orbit.h
> config.status: creating src/orb/Makefile
> config.status: creating src/orbit-idl-compiler/Makefile
> config.status: creating src/orbit-idl-compiler/backends/Makefile
> config.status: creating src/orbit-idl-compiler/backends/c/Makefile
> config.status: creating src/services/Makefile
> config.status: creating src/services/name/Makefile
> config.status: creating src/services/event/Makefile
> config.status: creating src/daemons/Makefile
> config.status: creating src/daemons/interface_repository/Makefile
> config.status: creating test/Makefile
> config.status: creating test/idl/Makefile
> config.status: creating test/test-poa/Makefile
> config.status: creating test/everything/Makefile
> config.status: creating ORBit.pc
> config.status: creating ORBit.spec
> config.status: creating config.h
> configure: configuring in libIDL
> configure: running /bin/sh './configure' --disable-indent --prefix=3D/us=
r/local --build=3Di386-portbld-freebsd4.9 LDFLAGS=3D-L/usr/local/lib 'CFLAG=
S=3D-O -pipe ' CPPFLAGS=3D-I/usr/local/include build_alias=3Di386-portbld-f=
reebsd4.9 CC=3Dcc --cache-file=3D/dev/null --srcdir=3D.
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...=20
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for strerror in -lcposix... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking how to run the C preprocessor... cc -E
> checking if C preprocessor likes IDL... yes
> checking if C preprocessor can read from stdin... yes
> checking how to ignore standard include path...=20
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for bison... no
> checking for byacc... byacc
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether to enable maintainer-specific portions of Makefiles... n=
o
> checking for glib-config... yes
> checking for glib-config... /usr/local/bin/glib12-config
> checking for GLIB - version >=3D 1.2.0... yes
> checking for ANSI C header files... yes
> checking for stddef.h... yes
> checking for wchar.h... yes
> checking for wcstr.h... no
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating Makefile.msc
> config.status: creating libIDL-config
> config.status: creating libIDL.m4
> config.status: creating libIDL.spec
> config.status: creating libIDL.pc
> config.status: creating IDL.h.new
> IDL.h is unchanged
>=20
> libIDL 0.6.8 configuration complete
>=20
> Flex installed: yes
> C Preprocessor: "cc -E"
> Standard input supported.
>=20
> configure: configuring in popt
> configure: running /bin/sh './configure' --disable-indent --prefix=3D/us=
r/local --build=3Di386-portbld-freebsd4.9 LDFLAGS=3D-L/usr/local/lib 'CFLAG=
S=3D-O -pipe ' CPPFLAGS=3D-I/usr/local/include build_alias=3Di386-portbld-f=
reebsd4.9 CC=3Dcc --cache-file=3D/dev/null --srcdir=3D.
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking target system type... i386-portbld-freebsd4.9
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...=20
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for strerror in -lcposix... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking how to run the C preprocessor... cc -E
> checking whether cc needs -traditional... no
> checking for cc option to accept ANSI C... none needed
> checking for function prototypes... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... no
> checking whether to build static libraries... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking for alloca.h... no
> checking for libintl.h... yes
> checking for mcheck.h... no
> checking for unistd.h... yes
> checking for /usr/ucblib in LIBS... no
> checking for GNU xgettext... yes
> checking for strerror... yes
> checking for mtrace... no
> checking for setreuid... yes
> checking for ranlib... (cached) ranlib
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... (cached) yes
> checking for off_t... yes
> checking for size_t... yes
> checking for working alloca.h... no
> checking for alloca... yes
> checking for stdlib.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... yes
> checking for working mmap... yes
> checking whether we are using the GNU C Library 2.1 or newer... no
> checking for argz.h... no
> checking for limits.h... yes
> checking for locale.h... yes
> checking for nl_types.h... yes
> checking for malloc.h... yes
> checking for stddef.h... yes
> checking for stdlib.h... (cached) yes
> checking for string.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for sys/param.h... yes
> checking for feof_unlocked... no
> checking for fgets_unlocked... no
> checking for getcwd... yes
> checking for getegid... yes
> checking for geteuid... yes
> checking for getgid... yes
> checking for getuid... yes
> checking for mempcpy... no
> checking for munmap... yes
> checking for putenv... yes
> checking for setenv... yes
> checking for setlocale... yes
> checking for stpcpy... no
> checking for strchr... yes
> checking for strcasecmp... yes
> checking for strdup... yes
> checking for strtoul... yes
> checking for tsearch... yes
> checking for __argz_count... no
> checking for __argz_stringify... no
> checking for __argz_next... no
> checking for iconv... yes
> checking for iconv declaration...=20
> extern size_t iconv (iconv_t cd, const char * *inbuf, size_t *in=
bytesleft, char * *outbuf, size_t *outbytesleft);
> checking for nl_langinfo and CODESET... yes
> checking for LC_MESSAGES... yes
> checking whether NLS is requested... yes
> checking whether included gettext is requested... no
> checking for libintl.h... (cached) yes
> checking for GNU gettext in libc... no
> checking for GNU gettext in libintl... yes
> checking for dcgettext... yes
> checking for msgfmt... /usr/local/bin/msgfmt
> checking for gmsgfmt... /usr/local/bin/msgfmt
> checking for xgettext... /usr/local/bin/xgettext
> checking for bison... no
> checking for catalogs to be installed... da cs el gl ro sk uk wa zh_CN.G=
B2312
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating intl/Makefile
> config.status: creating po/Makefile.in
> config.status: creating config.h
> =3D=3D=3D> Building for ORBit-0.5.17_1
> gmake all-recursive
> gmake[1]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
> Making all in popt
> gmake[2]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt'
> gmake all-recursive
> gmake[3]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt'
> Making all in intl
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt/intl'
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t/intl'
> Making all in po
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt/po'
> ( if test 'x.' !=3D 'x.'; then \
> posrcprefix=3D'../'; \
> else \
> posrcprefix=3D"../"; \
> fi; \
> rm -f POTFILES-t POTFILES \
> && (sed -e '/^#/d' -e '/^[ ]*$/d' \
> -e "s@.*@ $posrcprefix& \\\\@" < ./POTFILES.in \
> | sed -e '$s/\\$//') > POTFILES-t \
> && chmod a-w POTFILES-t \
> && mv POTFILES-t POTFILES )
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t/po'
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt'
> /bin/sh ./libtool --mode=3Dcompile cc -DHAVE_CONFIG_H -I. -I. -I. -I. -I=
/usr/local/include -Wall -O -pipe -c popt.c
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t'
> gmake[3]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t'
> gmake[2]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t'
> gmake[1]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
> *** Error code 2
>=20
> Stop in /usr/ports/devel/ORBit.
> *** Error code 1
>=20
> Stop in /usr/ports/www/mozilla-firebird.
>=20
> ______________________________________________________________________
> =3D=3D=3D> Extracting for ORBit-0.5.17_1
> >> Checksum OK for gnome/ORBit-0.5.17.tar.bz2.
> =3D=3D=3D> Patching for ORBit-0.5.17_1
> =3D=3D=3D> Applying FreeBSD patches for ORBit-0.5.17_1
> =3D=3D=3D> ORBit-0.5.17_1 depends on executable: gmake - found
> =3D=3D=3D> ORBit-0.5.17_1 depends on file: /usr/local/libexec/libtool13=
/libtool - found
> =3D=3D=3D> ORBit-0.5.17_1 depends on executable: pkg-config - found
> =3D=3D=3D> ORBit-0.5.17_1 depends on shared library: intl.5 - found
> =3D=3D=3D> ORBit-0.5.17_1 depends on shared library: glib12.3 - found
> =3D=3D=3D> Configuring for ORBit-0.5.17_1
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...=20
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking how to run the C preprocessor... cc -E
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether to enable maintainer-specific portions of Makefiles... n=
o
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking for indentation command to pipe generated c-files through... cat
> checking for glib-config... /usr/local/bin/glib12-config
> checking for GLIB - version >=3D 1.2.1... yes
> checking for bison... no
> checking for byacc... byacc
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for mawk... no
> checking for gawk... no
> checking for nawk... nawk
> checking for ANSI C header files... yes
> checking for fcntl.h... yes
> checking for unistd.h... yes
> checking for sys/endian.h... yes
> checking for endian.h... no
> checking for machine/endian.h... yes
> checking for sys/machine.h... no
> checking for sys/isa_defs.h... no
> checking for sys/poll.h... yes
> checking for stddef.h... yes
> checking for wchar.h... yes
> checking for wcstr.h... no
> checking for wctype.h... yes
> checking for machine/types.h... yes
> checking for tcpd.h... yes
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... (cached) yes
> checking for size_t... yes
> checking for vprintf... yes
> checking for _doprnt... no
> checking for poll... yes
> checking for basename... yes
> checking for socket... yes
> checking for gethostbyname... yes
> checking for socklen_t... yes
> checking "whether to use TCP wrappers"... yes
> checking for inet_aton... yes
> checking whether byte ordering is bigendian... no
> checking how many vectors writev is capable to handle...=20
> 1024
> checking alignment of CORBA_short... 2
> checking alignment of CORBA_long... 4
> checking alignment of CORBA_unsigned_short... 2
> checking alignment of CORBA_unsigned_long... 4
> checking alignment of CORBA_float... 4
> checking alignment of CORBA_double... 4
> checking alignment of CORBA_char... 1
> checking alignment of CORBA_boolean... 1
> checking alignment of CORBA_octet... 1
> checking alignment of CORBA_long_double... 4
> checking alignment of CORBA_wchar... 2
> checking alignment of CORBA_long_long... 4
> checking alignment of CORBA_unsigned_long_long... 4
> checking alignment of CORBA_struct... 1
> checking alignment of CORBA_pointer... 4
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating orbit-config
> config.status: creating src/Makefile
> config.status: creating src/ORBitutil/Makefile
> config.status: creating src/ORBitutil/orbit-os-config.h
> config.status: creating src/IIOP/Makefile
> config.status: creating src/orb/orbit.h
> config.status: creating src/orb/Makefile
> config.status: creating src/orbit-idl-compiler/Makefile
> config.status: creating src/orbit-idl-compiler/backends/Makefile
> config.status: creating src/orbit-idl-compiler/backends/c/Makefile
> config.status: creating src/services/Makefile
> config.status: creating src/services/name/Makefile
> config.status: creating src/services/event/Makefile
> config.status: creating src/daemons/Makefile
> config.status: creating src/daemons/interface_repository/Makefile
> config.status: creating test/Makefile
> config.status: creating test/idl/Makefile
> config.status: creating test/test-poa/Makefile
> config.status: creating test/everything/Makefile
> config.status: creating ORBit.pc
> config.status: creating ORBit.spec
> config.status: creating config.h
> configure: configuring in libIDL
> configure: running /bin/sh './configure' --disable-indent --prefix=3D/us=
r/local --build=3Di386-portbld-freebsd4.9 LDFLAGS=3D-L/usr/local/lib 'CFLAG=
S=3D-O -pipe ' CPPFLAGS=3D-I/usr/local/include build_alias=3Di386-portbld-f=
reebsd4.9 CC=3Dcc --cache-file=3D/dev/null --srcdir=3D.
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...=20
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for strerror in -lcposix... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking how to run the C preprocessor... cc -E
> checking if C preprocessor likes IDL... yes
> checking if C preprocessor can read from stdin... yes
> checking how to ignore standard include path...=20
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for bison... no
> checking for byacc... byacc
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether to enable maintainer-specific portions of Makefiles... n=
o
> checking for glib-config... yes
> checking for glib-config... /usr/local/bin/glib12-config
> checking for GLIB - version >=3D 1.2.0... yes
> checking for ANSI C header files... yes
> checking for stddef.h... yes
> checking for wchar.h... yes
> checking for wcstr.h... no
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating Makefile.msc
> config.status: creating libIDL-config
> config.status: creating libIDL.m4
> config.status: creating libIDL.spec
> config.status: creating libIDL.pc
> config.status: creating IDL.h.new
> IDL.h is unchanged
>=20
> libIDL 0.6.8 configuration complete
>=20
> Flex installed: yes
> C Preprocessor: "cc -E"
> Standard input supported.
>=20
> configure: configuring in popt
> configure: running /bin/sh './configure' --disable-indent --prefix=3D/us=
r/local --build=3Di386-portbld-freebsd4.9 LDFLAGS=3D-L/usr/local/lib 'CFLAG=
S=3D-O -pipe ' CPPFLAGS=3D-I/usr/local/include build_alias=3Di386-portbld-f=
reebsd4.9 CC=3Dcc --cache-file=3D/dev/null --srcdir=3D.
> checking build system type... i386-portbld-freebsd4.9
> checking host system type... i386-portbld-freebsd4.9
> checking target system type... i386-portbld-freebsd4.9
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...=20
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for strerror in -lcposix... no
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking how to run the C preprocessor... cc -E
> checking whether cc needs -traditional... no
> checking for cc option to accept ANSI C... none needed
> checking for function prototypes... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... no
> checking whether to build static libraries... yes
> creating libtool
> checking host system type... i386-unknown-freebsd4.9
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared librari=
es... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.9 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking for a BSD compatible install... /usr/bin/install -c -o root -g w=
heel
> checking for alloca.h... no
> checking for libintl.h... yes
> checking for mcheck.h... no
> checking for unistd.h... yes
> checking for /usr/ucblib in LIBS... no
> checking for GNU xgettext... yes
> checking for strerror... yes
> checking for mtrace... no
> checking for setreuid... yes
> checking for ranlib... (cached) ranlib
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... (cached) yes
> checking for off_t... yes
> checking for size_t... yes
> checking for working alloca.h... no
> checking for alloca... yes
> checking for stdlib.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... yes
> checking for working mmap... yes
> checking whether we are using the GNU C Library 2.1 or newer... no
> checking for argz.h... no
> checking for limits.h... yes
> checking for locale.h... yes
> checking for nl_types.h... yes
> checking for malloc.h... yes
> checking for stddef.h... yes
> checking for stdlib.h... (cached) yes
> checking for string.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for sys/param.h... yes
> checking for feof_unlocked... no
> checking for fgets_unlocked... no
> checking for getcwd... yes
> checking for getegid... yes
> checking for geteuid... yes
> checking for getgid... yes
> checking for getuid... yes
> checking for mempcpy... no
> checking for munmap... yes
> checking for putenv... yes
> checking for setenv... yes
> checking for setlocale... yes
> checking for stpcpy... no
> checking for strchr... yes
> checking for strcasecmp... yes
> checking for strdup... yes
> checking for strtoul... yes
> checking for tsearch... yes
> checking for __argz_count... no
> checking for __argz_stringify... no
> checking for __argz_next... no
> checking for iconv... yes
> checking for iconv declaration...=20
> extern size_t iconv (iconv_t cd, const char * *inbuf, size_t *in=
bytesleft, char * *outbuf, size_t *outbytesleft);
> checking for nl_langinfo and CODESET... yes
> checking for LC_MESSAGES... yes
> checking whether NLS is requested... yes
> checking whether included gettext is requested... no
> checking for libintl.h... (cached) yes
> checking for GNU gettext in libc... no
> checking for GNU gettext in libintl... yes
> checking for dcgettext... yes
> checking for msgfmt... /usr/local/bin/msgfmt
> checking for gmsgfmt... /usr/local/bin/msgfmt
> checking for xgettext... /usr/local/bin/xgettext
> checking for bison... no
> checking for catalogs to be installed... da cs el gl ro sk uk wa zh_CN.G=
B2312
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating intl/Makefile
> config.status: creating po/Makefile.in
> config.status: creating config.h
> =3D=3D=3D> Building for ORBit-0.5.17_1
> gmake all-recursive
> gmake[1]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
> Making all in popt
> gmake[2]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt'
> gmake all-recursive
> gmake[3]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt'
> Making all in intl
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt/intl'
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t/intl'
> Making all in po
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt/po'
> ( if test 'x.' !=3D 'x.'; then \
> posrcprefix=3D'../'; \
> else \
> posrcprefix=3D"../"; \
> fi; \
> rm -f POTFILES-t POTFILES \
> && (sed -e '/^#/d' -e '/^[ ]*$/d' \
> -e "s@.*@ $posrcprefix& \\\\@" < ./POTFILES.in \
> | sed -e '$s/\\$//') > POTFILES-t \
> && chmod a-w POTFILES-t \
> && mv POTFILES-t POTFILES )
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t/po'
> gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/po=
pt'
> /bin/sh ./libtool --mode=3Dcompile cc -DHAVE_CONFIG_H -I. -I. -I. -I. -I=
/usr/local/include -Wall -O -pipe -c popt.c
> gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t'
> gmake[3]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t'
> gmake[2]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/pop=
t'
> gmake[1]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
> *** Error code 2
>=20
> Stop in /usr/ports/devel/ORBit.
>=20
> ______________________________________________________________________
> _______________________________________________
> freebsd-gnome@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-gnome
> To unsubscribe, send any mail to "freebsd-gnome-unsubscribe@freebsd.org"
--=20
PGP Key : http://www.marcuscom.com/pgp.asc
--=-BmQmEKWwtA/VrTVu8l+M
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (FreeBSD)
iD8DBQBAZbteb2iPiv4Uz4cRAopKAJ9UoGGd63K5VwJh8duK8ZzlZ0nfxgCeLbPu
q0elXEHGsZ5ZWTVfJHYpJE4=
=Fl2r
-----END PGP SIGNATURE-----
--=-BmQmEKWwtA/VrTVu8l+M--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1080408926.35462.4.camel>