Date: Mon, 24 Nov 2003 17:11:25 +0100 From: Stefan Knoblauch <mail@stefan-knoblauch.de> To: freebsd-stable@freebsd.org Subject: Re: hard error reading fsbn Message-ID: <20031124171125.6dae30ee.mail@stefan-knoblauch.de> In-Reply-To: <20031123112301.5d50b61a.mail@stefan-knoblauch.de> References: <20031123112301.5d50b61a.mail@stefan-knoblauch.de>
next in thread | previous in thread | raw e-mail | index | archive | help
hi, sorry that i do not send more information, this not happened again :) here a part of my dmesg bootup. i use FreeBSd 4.9 on a HP Vectra VL400. the problem comes up first, as i add the adaptec SCSI controller, but do not use a disk on it. and i replace both disks. as you can see the disks are Maxtor discs, and they are new. i do not change the cable, because it works perfectly before 4.9 from 3.5 to to to to to 4.8. regards Stefan FreeBSD 4.9-STABLE #0: Sun Nov 16 21:01:13 CET 2003 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci2: <PCI bus> on pcib1 pci2: <NVidia model 0172 graphics accelerator> at 0.0 irq 10 pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <unknown card> (vendor=0x109e, dev=0x034e) at 0.0 irq 11 pci1: <unknown card> (vendor=0x109e, dev=0x0858) at 0.1 irq 11 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x2000-0x20ff mem 0xe9000000-0xe9000fff irq 5 at device 1.0 on pci1 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x2400-0x247f mem 0xe9001000-0xe900107f irq 9 at device 2.0 on pci1 xl0: Ethernet address: 00:50:04:65:69:3d miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0x2480-0x24ff mem 0xe9001400-0xe900147f irq 5 at device 4.0 on pci1 xl1: Ethernet address: 00:01:03:07:85:d4 miibus1: <MII bus> on xl1 xlphy1: <3c905C 10/100 internal PHY> on miibus1 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH ATA66 controller> port 0x1800-0x180f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801AA (ICH) USB controller> port 0x1820-0x183f irq 11 at device 31.2 on pci0 usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9 pcm0: <Intel ICH (82801AA)> port 0x1300-0x133f,0x1200-0x12ff irq 9 at device 31.5 on pci0 pcm0: <Cirrus Logic CS4299 AC97 Codec> default ad0: 29325MB <Maxtor 2F030L0> [59582/16/63] at ata0-master UDMA66 ad1: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata0-slave UDMA66 acd0: CD-RW <HL-DT-ST RW/DVD GCC-4480B> at ata1-slave PIO4 Waiting 10 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s1a ad1: DMA problem fallback to PIO mode ad1: DMA problem fallback to PIO mode ad1s1e: hard error reading fsbn 257417487 of 128708640-128708895 (ad1s1 bn 257417487; cn 16023 tn 126 sn 54) status=59 error=40
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031124171125.6dae30ee.mail>