From owner-freebsd-multimedia  Thu Dec 30  6:56:56 1999
Delivered-To: freebsd-multimedia@freebsd.org
Received: from info.iet.unipi.it (info.iet.unipi.it [131.114.9.184])
	by hub.freebsd.org (Postfix) with ESMTP
	id 53DC415331; Thu, 30 Dec 1999 06:56:40 -0800 (PST)
	(envelope-from luigi@info.iet.unipi.it)
Received: (from luigi@localhost)
	by info.iet.unipi.it (8.9.3/8.9.3) id PAA00478;
	Thu, 30 Dec 1999 15:56:44 +0100 (CET)
	(envelope-from luigi)
From: Luigi Rizzo <luigi@info.iet.unipi.it>
Message-Id: <199912301456.PAA00478@info.iet.unipi.it>
Subject: Re: soundcards needed to further newpcm development
In-Reply-To: <19991230145018.757B21CA0@overcee.netplex.com.au> from Peter Wemm
 at "Dec 30, 1999 10:50:18 pm"
To: Peter Wemm <peter@netplex.com.au>
Date: Thu, 30 Dec 1999 15:56:44 +0100 (CET)
Cc: Bill Swingle <unfurl@dub.net>, multimedia@FreeBSD.ORG,
	hackers@FreeBSD.ORG, cg@FreeBSD.ORG
X-Mailer: ELM [version 2.4ME+ PL61 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-multimedia@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> Luigi Rizzo wrote:
> 
> I have a YMF719E card (that's on the chip itself) that works on a week-old
> -current (on an Alpha no less):

by "works" i mean work in full duplex. Most reports i got for the '719
is that audio capture seems not to work. I seem to remember the problem
is in the mixer -- i.e. you get data out of the codec, but there is
no signal. Go figure where the '719 has the mute bits and mixer input
select...

Does your card really _works_ as above ?

	cheers
	luigi

> pcm0: <Yamaha SA2> at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 0,1 on isa0
> pcm0: interrupting at ISA irq 5
> joy0: <Generic PnP Joystick> at port 0x201 on isa0
> unknown0: <OPL3-SAX Sound Board> at port 0x100-0x107 on isa0
> unknown1: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee irq 11 on isa0
> 
> 
> I have another machine (toshiba tecra 8000 laptop) with a yamaha-something
> in it (this is a PNPBIOS detected device):
> 
> pcm0: <Yamaha OPL-SAx> at port 0x220-0x233,0x530-0x537,0x388-0x38f,0x330-0x333,0x538-0x539 irq 5 drq 1,0 on isa0
> 
> I seem to recall it too was a YHM0021 pnp id, but I don't know exactly what it
> is.
> 
> YMH0021: adding io range 0x220-0x233, size=0x14, align=0x1
> YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
> YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1
> YMH0021: adding io range 0x330-0x333, size=0x4, align=0x1
> YMH0021: adding io range 0x538-0x539, size=0x2, align=0x1
> YMH0021: adding irq mask 0x20
> YMH0021: adding dma mask 0x2
> YMH0021: adding dma mask 0x1
> YMH0021: start dependant
> pnpbios: handle 21 device ID YMH0021 (2100a865)
> 
> It's not a pnp device like the one on the card in the Alpha system.  It's
> statically configured by the bios setup.
> 
> Cheers,
> -Peter
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-hackers" in the body of the message
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message