Date: Wed, 23 Dec 1998 10:47:57 +0200 From: "Roman D. Sinyuk" <srd@umc.com.ua> To: freebsd-questions@FreeBSD.ORG Subject: my 2.2.7 panic Message-ID: <3680AE3D.E3AF4EEF@umc.com.ua>
next in thread | raw e-mail | index | archive | help
Hi All!
I have a big problem with my 2.2.7 box. After installing mysql-3.22.13
and running
sql benchmark test on database placed on ccd stripped disk, the
following messages
periodically appeared on console
/kernel freeinode /db/23044 had 16 block
/kernel freeinode /db/23044 had 32 block
/kernel freeinode /db/23044 had 16 block
....
Whad does it mean? Since 30-40 min system was panic:
dev=0x1501 block=3080 fs=/db
panic: blkfree: freing free block
But, if I run sql benchmark on usual (non ccd) disk, all was fine.
Does it make sense migrate from ccd to vinum? or bug not in ccd ?
The configuration of my box follows:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 2.2.7-RELEASE #0: Thu Nov 5 18:14:10 EET 1998
root@my.host.my.domain:/usr/src/sys/compile/CALIPSO
CPU: Pentium II (quarter-micron) (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,<b16>,<b17>,MMX,<b24>>
real memory = 134217728 (131072K bytes)
avail memory = 129335296 (126304K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7190 subclass=0)> rev 2 on
pci0:0:0
chip1 <generic PCI bridge (vendor=8086 device=7191 subclass=4)> rev 2 on
pci0:1:0
chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:4:0
chip3 <Intel 82371AB IDE interface> rev 1 on pci0:4:1
chip4 <Intel 82371AB USB interface> rev 1 int d irq ?? on pci0:4:2
chip5 <Intel 82371AB Power management controller> rev 2 on pci0:4:3
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 1 int a irq 5 on
pci0:9:0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:1:0): "IBM DCAS-34330W S61A" type 0 fixed SCSI 2
sd0(ahc0:1:0): Direct-Access 4134MB (8467200 512 byte sectors)
(ahc0:2:0): "IBM DDRS-34560W S97B" type 0 fixed SCSI 2
sd1(ahc0:2:0): Direct-Access 4357MB (8925000 512 byte sectors)
ed0 <NE2000 PCI Ethernet (RealTek 8029)> rev 0 int a irq 12 on pci0:10:0
ed0: address 00:00:21:68:7d:ef, type NE2000 (16 bit)
ahc1 <Adaptec 2940 Ultra SCSI host adapter> rev 1 int a irq 10 on
pci0:11:0
ahc1: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc1 waiting for scsi devices to settle
(ahc1:1:0): "IBM DDRS-34560W S97B" type 0 fixed SCSI 2
sd2(ahc1:1:0): Direct-Access 4357MB (8925000 512 byte sectors)
(ahc1:2:0): "IBM DDRS-34560W S97B" type 0 fixed SCSI 2
sd3(ahc1:2:0): Direct-Access 4357MB (8925000 512 byte sectors)
vga0 <VGA-compatible display device> rev 211 int a irq 11 on pci0:12:0
Probing for devices on PCI bus 1:
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
aic0 at 0x340-0x35f irq 11 on isa
aic0 waiting for scsi devices to settle
(aic0:3:0): "HP HP35480A T603" type 1 removable SCSI 2
st0(aic0:3:0): Sequential-Access density code 0x13, drive empty
scd0 not found at 0x230
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
ccd0-5: Concatenated disk drivers
changing root device to sd0s1a
WARNING: / was not properly dismounted.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3680AE3D.E3AF4EEF>