From owner-freebsd-multimedia Mon Aug 18 06:09:45 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA20762 for multimedia-outgoing; Mon, 18 Aug 1997 06:09:45 -0700 (PDT) Received: from gatekeeper.ukrv.de (gatekeeper.ukrv.de [193.175.72.2]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id GAA20748 for ; Mon, 18 Aug 1997 06:09:35 -0700 (PDT) Received: by gatekeeper.ukrv.de; (5.65/1.1.8.2/17Oct95-0336PM) id AA30852; Mon, 18 Aug 1997 15:09:33 +0200 Received: from mailhost(193.175.66.33) by gatekeeper.ukrv.de via smap (V1.3-JSC) id sma018641; Mon Aug 18 15:09:10 1997 Received: from merlin.ukrv.de by mailhost.ukrv.de; (5.65/1.1.8.2/08Mar95-0213PM) id AA13986; Mon, 18 Aug 1997 15:09:09 +0200 Received: by merlin.ukrv.de (4.1/UKRV-Gen PCG 0.1) id AA26422; Mon, 18 Aug 97 15:09:09 +0200 From: Udo Wolter Message-Id: <9708181309.AA26422@merlin.ukrv.de> Subject: Re: snd970814.tgz To: multimedia@FreeBSD.ORG Date: Mon, 18 Aug 1997 15:09:08 +0200 (MET DST) X-Mailer: ELM [version 2.4ME+ PL31 (25)] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi ! I tried the sound-patch (snd970814.tgz) with no success. I'm using a Toshiba Tecra 510CDT Notebook which should have a CS4232 (Win95 says so). This card is in a double mode from the BIOS. It uses only one IRQ (normally IRQ 5) for both WSS (I think it's the same as MSS) and SBPro. I can choose between different DMA-Channels for recording & playing audio or simply using 1 channel for both. The WSS is configured at 0x534, the SBPro is configured at 0x220, both have IRQ 5. When I'm using the line: device pcm0 at isa ? port ? tty irq 5 drq 1 flags 0 vector pcmintr the card comes up as SBPro. I can't play anything with it. I tried to play MPEG-Audio with 16 bit with no success. After this I tried to change them via sox to 8 bit but the same result: just a low continuing toot-tone. When I'm using the line: device pcm0 at isa ? port 0x534 tty irq 5 drq 1 flags 0 vector pcmintr the system hangs at boot time. It probes the pcm device but then just hangs. I also tried device pcm0 at isa ? port 0x534 tty irq 5 drq 1 flags 0x13 vector pcmintr It doesn't hang but after probing it goes on with the message: pcm0 not found at 0x534 By the way, the probing message seems also very strange: pcm0 at 0x 534 irq 5 drq 1 mem 0x 0 flag s 0x 13 en 1 confl 0 So, what can I do to play MPEG-Audio with 16 bit directly on this card ? Or is it impossible with this code ? Thanx & Bye, Udo -- Udo Wolter, email: uwp@cs.tu-berlin.de !!! LOW-TECH Page: http://low-tech.home.ml.org !!!