Date: Mon, 19 Jun 2000 13:14:07 +1000 From: Peter Jeremy <peter.jeremy@alcatel.com.au> To: stable@FreeBSD.ORG Subject: Problems with PCMCIA on Compaq Armada 7400 Message-ID: <00Jun19.131408est.115204@border.alcanet.com.au>
next in thread | raw e-mail | index | archive | help
A colleague is attempting to install 4.0-R on a Compaq Armada 7400.
His main problem is that the kernel won't recognize the PCMCIA slots.
The dmesg from a boot -v is below.
When I disable one of the slots, it _does_ show up as
`pcic1: not probed (disabled)' (between sc0 and sio0), it's just that
when it's not disabled it reports nothing.
Any ideas?
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Sat Jun 10 04:32:56 EST 2000
root@:/usr/src/sys/compile/RLC
Calibrating clock(s) ... TSC clock: 365697450 Hz, i8254 clock: 1193218 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (365.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201285632 (196568K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00309000 - 0x0bfedfff, 198070272 bytes (48357 pages)
config> ...
avail memory = 192069632 (187568K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x453
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:4e76 Rev = 1.0
pnpbios: Event flag at fe2f6
pnpbios: OEM ID b9b0110e
Other BIOS signatures found:
ACPI: 000ffed0
Preloaded elf kernel "kernel" at 0xc02f0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f00ac.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=ae6c0e11)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=ae6c0e11)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x0e11, dev=0xae6c, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 50000000, size 28
map[14]: type 1, range 32, base 44000000, size 12
found-> vendor=0x0e11, dev=0xae6c, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=1 secondarybus=1
found-> vendor=0x104c, dev=0xac16, revid=0x02
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=2 secondarybus=2
intpin=a, irq=11
map[10]: type 1, range 32, base 7fffe000, size 12
found-> vendor=0x104c, dev=0xac16, revid=0x02
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=3 secondarybus=3
intpin=a, irq=11
map[10]: type 1, range 32, base 7ffff000, size 12
found-> vendor=0x0e11, dev=0xae69, revid=0x03
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x0e11, dev=0xae33, revid=0x01
class=01-01-ea, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 00001000, size 4
found-> vendor=0x0e11, dev=0xa0f8, revid=0x11
class=0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 44080000, size 12
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=0e11 device=ae6c)> at device 0.1 on pci0
found-> vendor=0x5333, dev=0x8c01, revid=0x06
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 40000000, size 26
pci1: <PCI bus> on pcib1
pci1: <S3 ViRGE MX graphics accelerator> (vendor=0x5333, dev=0x8c01) at 0.0
pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 12.0 on pci0
PCI Config space:
00: ac16104c 02100003 06070002 00824208
10: 7fffe000 020000a0 00020200 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: b0480e11 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 20449060 00000080 01898181 00000000
90: 60640280 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000000: 00000000: 30000006: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 12.1 on pci0
PCI Config space:
00: ac16104c 02100003 06070002 00824208
10: 7ffff000 020000a0 00030300 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: b0480e11 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 20449060 00000080 01898181 00000000
90: 60640280 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000006: 00000000: 30000410: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
isab0: <PCI to ISA bridge (vendor=0e11 device=ae69)> at device 14.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Unknown PCI ATA controller (generic mode)> port 0x1000-0x100f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 14.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x9
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1008
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
pci0: <OHCI USB controller> (vendor=0x0e11, dev=0xa0f8) at 14.2 irq 11
eisa0: <EISA bus> on motherboard
mainboard0: <D@@0000 (System Board)> on eisa0 slot 0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
devclass_alloc_unit: ata0 already exists, using next available unit number
devclass_alloc_unit: ata1 already exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:ffffffff
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00fa
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd: failed to reset the keyboard.
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 02 3c
psm: status 90 02 3c
psm: status 90 02 3c
psm: status 00 00 28
psm: data 08 00 00
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 f0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0x200
sio1: irq maps: 0x41 0x241 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fdef3f 0..1021=1022 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 40084040, tty 4003109a, net 4007109a
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
ad0: <IBM-DCXA-210000/CX6OA81F> ATA-4 disk at ata0 as master
ad0: 9590MB (19640880 sectors), 19485 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, BIOSDMA
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
Creating DISK wd0
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting up PIO4 mode on generic chip
acd0: <COMPAQ DVD-ROM SR-8171/059C> DVD-ROM drive at ata0 as slave
acd0: read 1031KB/s (3437KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA, DVD-ROM, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
Mounting root from ufs:/dev/ad0s4a
ad0s1: type 0x7, start 30240, end = 6667919, size 6637680 : OK
ad0s2: type 0xf, start 12398400, end = 19640879, size 7242480 : OK
ad0s3: type 0x12, start 63, end = 30239, size 30177 : OK
ad0s4: type 0xa5, start 6667920, end = 12398399, size 5730480 : OK
ad0s5: type 0x7, start 12398463, end = 18824399, size 6425937 : OK
ad0<extended>: type 0x5, start 18824400, end = 19625759, size 801360
ad0<extended>: C/H/S start 1023/0/1 (15467760) != start 18824400: invalid
ad0s6: type 0x82, start 18824463, end = 19625759, size 801297
ad0s6: C/H/S start 1023/1/1 (15467823) != start 18824463: invalid
start_init: trying /sbin/init
Peter
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00Jun19.131408est.115204>