Date: Mon, 01 Mar 1999 11:18:32 -0500 From: Rick Leir <rleir@hymarc.com> To: stable@FreeBSD.ORG Subject: 3.0 Netscape 4.5 in Linux compatibility mode Message-ID: <36DABDD8.CBAA815A@hymarc.com> References: <Pine.BSF.4.05.9902251729530.3514-100000@netmug.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi All I am getting a 'lockup' running FreeBSD 3.0 with Netscape 4.5 in Linux compatibility mode. 'Lockup' means that I can ping to the FreeBSD box, but not telnet or login and the console is hung. It always occurs when I click the Delete button in the messaging window. Not all clcks on Delete cause a lockup, just one in ten. I don't think this is related to movemail because it occurs whether or not I have /var/mail writable, and I do not have a movemail executable. linux_lib-2.5 13854930 Feb 23 11:06 communicator-v45-us.x86-unknown-linux2.0.tar.gz It is time for me to get into the kernel debugger, but this is the first time for me so perhaps someone could tell me the first few steps. Netscape does provide a native FreeBSD port, I may get that, but it would be interesting to know whether the Linux compatibility library has a problem. cheers -- Rick Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-RELEASE #0: Sat Oct 17 17:45:06 GMT 1998 jkh@kickme.freebsd.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz cost 3214 ns Timecounter "TSC" frequency 348204994 Hz cost 144 ns CPU: Pentium II (quarter-micron) (348.20-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping=2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>> real memory = 134217728 (131072K bytes) avail memory = 127782912 (124788K bytes) Probing for devices on PCI bus 0: chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0 chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0 chip2: <PCI to PCI bridge (vendor=1011 device=0024)> rev 0x03 on pci0.2.0 chip3: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 chip4: <Intel 82371AB USB host controller> rev 0x01 int d irq 0 on pci0.7.2 chip5: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3 xl0: <3Com 3c905 Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 14 on pci0.10.0 xl0: Ethernet address: 00:10:5a:9c:b9:06 xl0: autoneg complete, link status good (half-duplex, 100Mbps) Probing for devices on PCI bus 1: vga0: <ATI model 4744 graphics accelerator> rev 0x5c on pci1.0.0 Probing for devices on PCI bus 2: ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 11 on pci2.4.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: <Adaptec aic7860 SCSI adapter> rev 0x03 int a irq 11 on pci2.6.0 ahc1: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 fe0 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 not found at 0x170 wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ie0: unknown board_id: f000 ie0 not found at 0x300 ep0 not found at 0x300 ex0 not found le0 not found at 0x300 lnc0 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 cs0 not found at 0x300 adv0 not found at 0x330 bt0 not found at 0x134 aha0 not found at 0x134 npx0 on motherboard npx0: INT 16 interface Waiting 15 seconds for SCSI devices to settle sa0 at ahc1 bus 0 target 6 lun 0 sa0: <ARCHIVE Python 04106-XXX 715G> Removable Sequential Access SCSI2 device sa0: 10.0MB/s transfers (10.0MHz, offset 15) da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST39102LC 0004> Fixed Direct Access SCSI2 device da0: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da2 at ahc0 bus 0 target 2 lun 0 da2: <SEAGATE ST39102LC 0004> Fixed Direct Access SCSI2 device da2: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST39102LC 0004> Fixed Direct Access SCSI2 device da1: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) changing root device to da0s1a cd0 at ahc1 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:465 1.03> Removable CD-ROM SCSI2 device cd0: 20.0MB/s transfers (20.0MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present WARNING: / was not properly dismounted -- Rick Leir, Hymarc 3D Vision Systems (613) 727 1584 x214 Fast, precise laser scanners. http://www.hymarc.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36DABDD8.CBAA815A>