Date: Tue, 06 Jan 2009 08:35:01 -0700 (MST) From: "M. Warner Losh" <imp@bsdimp.com> To: hselasky@c2i.net Cc: usb@FreeBSD.org, freebsd-usb@FreeBSD.org Subject: Re: xsane busted with usb2 Message-ID: <20090106.083501.-861032140.imp@bsdimp.com> In-Reply-To: <200901061630.02022.hselasky@c2i.net> References: <200901060940.21830.hselasky@c2i.net> <20090106.082105.-1404127776.imp@bsdimp.com> <200901061630.02022.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
In message: <200901061630.02022.hselasky@c2i.net>
Hans Petter Selasky <hselasky@c2i.net> writes:
: On Tuesday 06 January 2009, M. Warner Losh wrote:
: > In message: <200901060940.21830.hselasky@c2i.net>
: >
: > Hans Petter Selasky <hselasky@c2i.net> writes:
: > : On Tuesday 06 January 2009, M. Warner Losh wrote:
: > : > With sys/dev/usb, I'm able to kldload uscanner and xsane just works.
: > : > With usb2, I klduscanner, and it doesn't. There's no /dev/uscanner0
: > : > in the ls listing, but one can open that file directly. trussing
: > : > sane-find-scanners yields:
: > : >
: > : > ...
: > : > open("/dev/",O_NONBLOCK,020222513) = 4 (0x4)
: > : > fstat(4,{ mode=dr-xr-xr-x ,inode=2,size=512,blksize=4096 }) = 0 (0x0)
: > : > fcntl(4,F_SETFD,FD_CLOEXEC) = 0 (0x0)
: > : > fstatfs(0x4,0x7fffffffda80,0x0,0x0,0x60,0x801200110) = 0 (0x0)
: > : > getdirentries(0x4,0x80120c000,0x1000,0x80120a0a8,0x30,0x801200158) =
: > : > 1516 (0x5ec)
: > : > getdirentries(0x4,0x80120c000,0x1000,0x80120a0a8,0xffffffff8064d180,0x7
: > : >ffff fffdd18) = 0 (0x0) lseek(4,0x0,SEEK_SET) = 0 (0x0)
: > : > close(4) = 0 (0x0)
: > : > open("/dev/usb0",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb1",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb2",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb3",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb4",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb5",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb6",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb7",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb8",O_RDWR,00) ERR#6 'Device not configured'
: > : > open("/dev/usb9",O_RDWR,00) ERR#6 'Device not configured'
: > : > write(1," # No USB scanners found. If yo"...,79) = 79 (0x4f)
: > : > ...
: > : >
: > : > Is there a fix for this?
: > :
: > : Hi,
: > :
: > : I looks like xsane is linked with libusb-0.1 . Try re-linking xsane with
: > : libusb20. Then everything should work.
: >
:
: FYI: libusb20 in FreeBSD is binary compatible with libusb-0.1
I built all these things with ports, will just updating the ports fix
them, or will I need to jump through some weird hoops?
Warner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090106.083501.-861032140.imp>