Date: Tue, 24 Aug 1999 22:13:58 -0700 From: what? paintball? <bleh@school.com> To: freebsd-questions@freebsd.org Subject: sound on ensoniq audio pci Message-ID: <37C37B95.676B6A9A@school.com>
next in thread | raw e-mail | index | archive | help
hey everyone. im trying to configure sound on my computer, and im not
really getting it. i have an ensoniq audio pci card. is there a place
that would give me some hints on how to go about getting this working?
im not sure if i should be compiling my kernel with snd0, or pcm0, or
what. any ideas on how i can get going on this? thanks.
-scott
below is an output of dmesg.. i dunno if there is anything in there that
i should be clueing into.
-(6)stock@muffin stock$ dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 3.2-RELEASE #1: Mon Aug 23 13:19:10 PDT 1999
root@muffin.fshcrkr.com:/usr/src/sys/compile/MUFFIN
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (367.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping=5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,<b24>>
real memory = 134217728 (131072K bytes)
avail memory = 127250432 (124268K bytes)
Preloaded elf kernel "kernel" at 0xc032a000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
vga0: <VGA-compatible display device> rev 0x04 int a irq 9 on pci0.11.0
pn0: <82c169 PNIC 10/100BaseTX> rev 0x21 int a irq 10 on pci0.15.0
pn0: Ethernet address: 00:a0:cc:3f:13:86
pn0: autoneg complete, link status good (half-duplex, 10Mbps)
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: USR2050 [0x50207256] Serial 0xd1acc983 Comp ID: @@@0000
[0x00
000000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model MouseMan+, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC WD136AA>
wd0: 12971MB (26564832 sectors), 26354 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <FX240S/j01>, removable, intr, dma, iordis
acd0: drive speed 4134KB/sec, 256KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data/audio disc loaded, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
adv0 not found at 0x330
bt_isa_probe: Probe failled for card at 0x330
bt_isa_probe: Probe failled for card at 0x334
bt_isa_probe: Probe failled for card at 0x230
bt_isa_probe: Probe failled for card at 0x234
bt_isa_probe: Probe failled for card at 0x130
bt_isa_probe: Probe failled for card at 0x134
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sscape0 not found at 0x330
sscape_mss0 not found at 0x543
changing root device to wd0s2a
pid 277 (ppp), uid 0: exited on signal 10 (core dumped)
cmd civctp pid 511 tried to use non-present sched_setscheduler
cmd civctp pid 512 tried to use non-present sched_setscheduler
cmd civctp pid 513 tried to use non-present sched_setscheduler
cmd civctp pid 523 tried to use non-present sched_setscheduler
cmd civctp pid 524 tried to use non-present sched_setscheduler
cmd civctp pid 525 tried to use non-present sched_setscheduler
cmd civctp pid 526 tried to use non-present sched_setscheduler
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37C37B95.676B6A9A>