Date: Fri, 6 Feb 2015 04:38:05 -0800 From: "Waitman Gobble" <waitman@waitman.net> To: "Aled Morris" <aledm@qix.co.uk> Cc: Stephen Hocking <stephen.hocking@gmail.com>, hackers@freebsd.org, waitman@waitman.net Subject: Re: Raspberry Pi 2 & FreeBSD? Message-ID: <8c322d05f9bca01fd42ff752ad333eba.squirrel@mx.waitman.net> In-Reply-To: <CAO1bj=ZSMumGnA0L3HM9FrogyMdf1Lb-RDPZ6ZLHoPoyevW9qw@mail.gmail.com> References: <CA%2BxzKjAgAtQt09z6iRXsaHKqacrNz5o4QN63HjuPekQMy0zM7A@mail.gmail.com> <548992a32c34c0ce7d44c6a89522e224.squirrel@mx.waitman.net> <CA%2BxzKjAkDgBD0nOqWQz%2BYeCtYRLLJ2yFA6ZPS0%2BzUOb2uAYvug@mail.gmail.com> <CAO1bj=ZSMumGnA0L3HM9FrogyMdf1Lb-RDPZ6ZLHoPoyevW9qw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, February 6, 2015 4:09 am, Aled Morris wrote: > I found FreeBSD a little unreliable on the old Pi (B), but I too have a > Pi > 2 now so I may give it another go. > > > Aled > > > On 6 February 2015 at 11:58, Stephen Hocking <stephen.hocking@gmail.com> > wrote: > > >> I ask, because mine just turned up! >> >> >> On Fri, Feb 6, 2015 at 10:58 PM, Waitman Gobble <waitman@waitman.net> >> wrote: >> >> >>> >>> On Fri, February 6, 2015 3:43 am, Stephen Hocking wrote: >>> >>>> Hi, >>>> >>>> >>>> >>>> Has anyone got this version of the raspberry pi on their radar? >>>> Quad >>>> core, 1GB RAM etc.... _______________________________________________ >>>> freebsd-hackers@freebsd.org mailing list >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >>>> To unsubscribe, send any mail to " >>>> >>> freebsd-hackers-unsubscribe@freebsd.org" >>>> >>>> >>> >>> i have a couple of them due to arrive feb 11. >>> >>> -- >>> Waitman Gobble >>> Los Altos California USA >>> +1.510-830-7975 >>> >>> >>> >> _______________________________________________ >> freebsd-hackers@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >> To unsubscribe, send any mail to >> "freebsd-hackers-unsubscribe@freebsd.org" >> >> > B+ running FreeBSD 11.0-CURRENT has seemed to be pretty solid. For a minute I did see an issue with some stuck duplicating processes that took down the system but I implemented pid file control and max execution time limits to solve that problem. A couple of other issues I need to work out, are repeated abrupt system shutdowns (power off) going to be an fsck nightmare, and it seems there is an issue with some things I need to start on boot not starting probably because of a lag in initial wireless connection. I just need to rethink those programs a bit, while avoiding the use of cron. here's disk info with USB connected thumb drive on B+, when I get a #2 up and running next week I can post that info as well. # diskinfo -tv /dev/da0 /dev/da0 512 # sectorsize 15504900096 # mediasize in bytes (14G) 30283008 # mediasize in sectors 0 # stripesize 0 # stripeoffset 1885 # Cylinders according to firmware. 255 # Heads according to firmware. 63 # Sectors according to firmware. 070145E2E7B25A46 # Disk ident. Seek times: Full stroke: 250 iter in 2.537767 sec = 10.151 msec Half stroke: 250 iter in 2.500066 sec = 10.000 msec Quarter stroke: 500 iter in 4.959595 sec = 9.919 msec Short forward: 400 iter in 3.943411 sec = 9.859 msec Short backward: 400 iter in 3.923324 sec = 9.808 msec Seq outer: 2048 iter in 1.912856 sec = 0.934 msec Seq inner: 2048 iter in 2.183054 sec = 1.066 msec Transfer rates: outside: 102400 kbytes in 8.565650 sec = 11955 kbytes/sec middle: 102400 kbytes in 8.553911 sec = 11971 kbytes/sec inside: 102400 kbytes in 8.524088 sec = 12013 kbytes/sec -- Waitman Gobble Los Altos California USA +1.510-830-7975
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8c322d05f9bca01fd42ff752ad333eba.squirrel>