From owner-freebsd-questions Mon Jul 31 18:26:21 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.11/8.6.6) id SAA28027 for questions-outgoing; Mon, 31 Jul 1995 18:26:21 -0700 Received: from bertrand.ccs.carleton.ca (bertrand.ccs.carleton.ca [134.117.1.42]) by freefall.cdrom.com (8.6.11/8.6.6) with SMTP id SAA28017 for ; Mon, 31 Jul 1995 18:26:20 -0700 Received: from tvo.org by bertrand.ccs.carleton.ca (4.1/SMI-4.0) id AA15229; Mon, 31 Jul 95 21:26:11 EDT From: Jordon_Davidson@tvo.org (Jordon Davidson) Reply-To: Jordon_Davidson@tvo.org To: gibbs@freefall.cdrom.com Cc: questions@freebsd.org Subject: Re: Re: Setup Trouble Date: 31 Jul 1995 23:36:35 GMT Message-Id: <19380316.1774112@tvo.org> Organization: From TVOntario's Public BBS Sender: questions-owner@freebsd.org Precedence: bulk Sadly, your Geometry setting suggestion did not work (the Geometry was already correct). Upon FreeBSD's attempt to install itself I once again received the following error and debug report: EXEC(/stand/newfs) Failed, code=5888 Debug Debug Debug Debug <10> Debug <10> Progress With a block size of 32768 minimum bytes per inode is 5990 Minimum bytes per inode is 5990 With 16065 sectors per cylinder, minimum cylinders per group is 64 This requires the block size to be changed from 8192 to 37768 and the fragment size to be changed from 1024 to 4096 I'm convinced that the problem could be easily rectified if I could just change the block and fragmentation sizes to the reccomended sizes; but how? Your next best suggestion would be appreciated. Also, will programs configured to run in SCO Unix 3.2.x run in FreeBSD? I believe that I read in the documentation that they would but verbose confirmation would be appreciated as both my UPS and digiboard are SCO but not BSD compliant. Thank you for your help. Jordon Davidson, Neptune Internet Services.