From owner-freebsd-hardware Sat Dec 2 19:25:16 2000 Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.hcvlny.cv.net (mx1.hcvlny.cv.net [167.206.112.76]) by hub.freebsd.org (Postfix) with ESMTP id 6CC0F37B400 for ; Sat, 2 Dec 2000 19:25:08 -0800 (PST) Received: from s1.optonline.net (s1.optonline.net [167.206.112.6]) by mx1.hcvlny.cv.net (8.10.2/8.10.2) with ESMTP id eB33P7R19313 for ; Sat, 2 Dec 2000 22:25:07 -0500 (EST) Received: from optonline.net (ool-18bd8597.dyn.optonline.net [24.189.133.151]) by s1.optonline.net (8.10.2/8.10.2) with ESMTP id eB33P7t07808 for ; Sat, 2 Dec 2000 22:25:07 -0500 (EST) Message-ID: <3A29BD13.AFE8BE68@optonline.net> Date: Sat, 02 Dec 2000 22:25:07 -0500 From: trini0 X-Mailer: Mozilla 4.75 [en] (X11; U; FreeBSD 4.2-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: FreeBSD Hardware Subject: Cold boot & FBSD 4.2S Content-Type: multipart/mixed; boundary="------------6C3E5CBB35AC07B237761B9D" Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. --------------6C3E5CBB35AC07B237761B9D Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit  
Hey all, I have a P200 w/ 32M of ram, adaptec 2940 card with a seagate 1G drive, Intel 100B & SMC Elite 16 WD8013 nics, on a motherboard w/ 430 HX chipset.  She used to run fine under 4.1.1.  Now I got problems with 4.2S.  I noticed that during a cold boot, about after detection of the keyboard, the system goes into a tail spin, and I cant figure out what the error message is.  If I were to hit the reset button or Ctrl-Alt-Del and let the system boot up again (warm boot), everything is fine.....
I noticed in the list that people were having warm boot problems.  Im the total opposite.  Other than that she hums like a bird (or fans and harddrives which ever suits you).  Has anyone heard of this, and know of a solution?  I have done the buildworld process twice, so from what I understand, taxes the system and I have no problems there.  I have included my config file and dmesg.
Thanks
  
-- 


         _____________________________
         |          trini0           |
         |                           |
     / ) | Systems Administrator     |
    / /  | Network Engineer          |
   ( (   | email ==>                 |
 (((\ \> |/ )  trini0@optonline.net  |
 (\\\\ \_/ /_________________________|
  \       /
   \    _/
   /   /
  /   /
 

  --------------6C3E5CBB35AC07B237761B9D Content-Type: text/plain; charset=us-ascii; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Dec 2 19:15:11 gw /kernel: Copyright (c) 1992-2000 The FreeBSD Project. Dec 2 19:15:11 gw /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Dec 2 19:15:11 gw /kernel: The Regents of the University of California. All rights reserved. Dec 2 19:15:11 gw /kernel: FreeBSD 4.2-STABLE #0: Sat Dec 2 00:30:43 EST 2000 Dec 2 19:15:11 gw /kernel: root@gw.example.net:/usr/obj/usr/src/sys/GW Dec 2 19:15:11 gw /kernel: Timecounter "i8254" frequency 1193182 Hz Dec 2 19:15:11 gw /kernel: Timecounter "TSC" frequency 199310324 Hz Dec 2 19:15:11 gw /kernel: CPU: Pentium/P54C (199.31-MHz 586-class CPU) Dec 2 19:15:11 gw /kernel: Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Dec 2 19:15:11 gw /kernel: Features=0x1bf Dec 2 19:15:11 gw /kernel: real memory = 33554432 (32768K bytes) Dec 2 19:15:11 gw /kernel: avail memory = 29986816 (29284K bytes) Dec 2 19:15:11 gw /kernel: Preloaded elf kernel "kernel" at 0xc02ce000. Dec 2 19:15:11 gw /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc02ce09c. Dec 2 19:15:11 gw /kernel: Intel Pentium detected, installing workaround for F00F bug Dec 2 19:15:11 gw /kernel: md0: Malloc disk Dec 2 19:15:11 gw /kernel: npx0: on motherboard Dec 2 19:15:11 gw /kernel: npx0: INT 16 interface Dec 2 19:15:11 gw /kernel: pcib0: on motherboard Dec 2 19:15:11 gw /kernel: pci0: on pcib0 Dec 2 19:15:11 gw /kernel: isab0: at device 7.0 on pci0 Dec 2 19:15:11 gw /kernel: isa0: on isab0 Dec 2 19:15:11 gw /kernel: pci0: at 7.1 Dec 2 19:15:11 gw /kernel: pci0: at 17.0 irq 15 Dec 2 19:15:11 gw /kernel: ahc0: port 0x6000-0x60ff mem 0xe4101000-0xe4101fff irq 9 at device 18.0 on pci0 Dec 2 19:15:11 gw /kernel: aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs Dec 2 19:15:11 gw /kernel: fxp0: port 0x6500-0x651f mem 0xe4000000-0xe40fffff,0xe4100000-0xe4100fff irq 12 at device 20.0 on pci0 Dec 2 19:15:11 gw /kernel: fxp0: Ethernet address 00:80:29:12:9c:20 Dec 2 19:15:11 gw /kernel: fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Dec 2 19:15:12 gw /kernel: fdc0: FIFO enabled, 8 bytes threshold Dec 2 19:15:12 gw /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Dec 2 19:15:12 gw /kernel: atkbdc0: at port 0x60,0x64 on isa0 Dec 2 19:15:12 gw /kernel: atkbd0: flags 0x1 irq 1 on atkbdc0 Dec 2 19:15:12 gw /kernel: vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Dec 2 19:15:12 gw /kernel: sc0: at flags 0x100 on isa0 Dec 2 19:15:12 gw /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Dec 2 19:15:12 gw /kernel: ed0 at port 0x300-0x31f iomem 0xd8000-0xdbfff irq 10 on isa0 Dec 2 19:15:12 gw /kernel: ed0: address 00:00:c0:29:52:48, type WD8013EPC (16 bit) Dec 2 19:15:12 gw /kernel: IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled Dec 2 19:15:12 gw /kernel: Waiting 5 seconds for SCSI devices to settle Dec 2 19:15:12 gw /kernel: Mounting root from ufs:/dev/da0s1a Dec 2 19:15:12 gw /kernel: da0 at ahc0 bus 0 target 0 lun 0 Dec 2 19:15:12 gw /kernel: da0: Fixed Direct Access SCSI-2 device Dec 2 19:15:12 gw /kernel: da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled Dec 2 19:15:12 gw /kernel: da0: 1005MB (2059140 512 byte sectors: 64H 32S/T 1005C) Dec 2 19:15:12 gw ntpd[143]: ntpd 4.0.99b Fri Dec 1 16:28:56 EST 2000 (1) Dec 2 19:15:12 gw ntpd[143]: using kernel phase-lock loop 2040 Dec 2 19:15:13 gw ntpd[143]: using kernel phase-lock loop 2041 Dec 2 19:15:20 gw login: ROOT LOGIN (root) ON ttyv0 Dec 2 19:19:48 gw ntpd[143]: time reset 0.671924 s Dec 2 19:19:48 gw ntpd[143]: kernel pll status change 2041 --------------6C3E5CBB35AC07B237761B9D Content-Type: text/plain; charset=us-ascii; name="GW" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="GW" # # GW -- Gateway/Firewall machine running FreeBSD ;) # Maintained by Greg Samson 11-17-00 machine i386 cpu I586_CPU ident GW maxusers 32 options INET #InterNETworking options IPFILTER options IPFILTER_LOG #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required #options MSDOSFS #MSDOS Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options CPU_FASTER_5X86_FPU device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 #device psm0 at atkbdc? irq 12 device vga0 at isa? # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # PCI Ethernet NICs. device fxp # Intel EtherExpress PRO/100B (82557, 82558) # ISA Ethernet NICs. device ed0 at isa? port 0x300 irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter --------------6C3E5CBB35AC07B237761B9D-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message