Date: Sat, 22 Dec 2018 12:29:18 -0500 From: <starikarp@yandex.com> To: freebsd-x11@freebsd.org Subject: Re: xserver - black screen Message-ID: <20181222122918.74010adf@yandex.com> In-Reply-To: <e4ed3bab-9e76-aef5-11a6-3682ff1caec4@nomadlogic.org> References: <20181221172029.6a769ebc@yandex.com> <e4ed3bab-9e76-aef5-11a6-3682ff1caec4@nomadlogic.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 21 Dec 2018 15:28:36 -0800 Pete Wright <pete@nomadlogic.org> wrote: > On 12/21/18 2:20 PM, starikarp@yandex.com wrote: > > > > I did install Xorg, Openbox and some other apps which I had before > > and also drm-kmod which choose version for 12 and xf86-video-ati. > > But after startx it start just black screen. I also try > > drm-legacy-kmod and legacy ati drivers but it is the same black > > screen. > > > > sysctl machdep boothmetod shows UEFI > > > > and > > sysctl kern.vty shows vt > > > > I also try to make xorg.conf but I got the black screen too. > > I made in /usr/local/etc/X11/xorg.conf.d/driver-scfb.conf and it > > works. > > > > Any suggestion how should I use mine Radeon 4850, please? > > can you send over a copy of your dmesg and your /var/log/Xorg.0.log > after you attempt to start Xorg with no configuration in place? > > also, make sure you are a member of the "video" group so that your > user has access to the graphics device. > > > -pete > Thank you. The log is when I try to start xserver. Everything was black and I need to restart computer. I just press ctrl-alt-F3 and than ctrl-c and shutdown - now and boot me back. But the problem is also if I kldload /boot/modules/radeonkms.ko. The screen is black and I need restart again. And bellow is "normal" dmesg: ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(efifb): resolution 2560x1440 CPU: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (2793.06-MHz K8-class CPU) Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8265011200 (7882 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <APPLE Apple00> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 3 6 2 5 4 7 Timecounter "TSC-low" frequency 1396528558 Hz quality 1000 random: entropy device external interface kbd0 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <APPLE Apple00> on motherboard acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xc0000000-0xcfffffff,0xd0620000-0xd062ffff at device 0.0 on pci1 hdac0: <ATI RV770 HDA Controller> mem 0xd0630000-0xd0633fff at device 0.1 on pci1 uhci0: <UHCI (generic) USB controller> port 0x3060-0x307f at device 26.0 on pci0 uhci0: LegSup = 0x2400 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xd0705c00-0xd0705fff at device 26.7 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac1: <Intel Ibex Peak HDA Controller> mem 0xd0700000-0xd0703fff at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib2: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom NetXtreme Fast Ethernet Controller, ASIC rev. 0x5784100> mem 0xd0500000-0xd050ffff at device 0.0 on pci2 bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: 00:23:df:ff:f1:9f pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pcib3: [GIANT-LOCKED] pci3: <ACPI PCI bus> on pcib3 ath0: <Atheros 9280> mem 0xd0400000-0xd040ffff at device 0.0 on pci3 ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: AR9280 mac 128.2 RF5133 phy 13.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib4: [GIANT-LOCKED] pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 fwohci0: <1394 Open Host Controller Interface> mem 0xd0304000-0xd03047ff,0xd0300000-0xd0303fff at device 0.0 on pci5 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 d4:9a:20:ff:fe:cd:f9:52 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. fwohci0: phy int firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound = 0x00000000 fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 pcib6: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pcib6: [GIANT-LOCKED] pcib7: <PCI-PCI bridge> at device 28.4 on pci0 pcib7: [GIANT-LOCKED] uhci1: <UHCI (generic) USB controller> port 0x3040-0x305f at device 29.0 on pci0 uhci1: LegSup = 0x2400 usbus2 on uhci1 usbus2: 12Mbps Full Speed USB v1.0 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xd0705800-0xd0705bff at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci1 usbus3: 480Mbps High Speed USB v2.0 pcib8: <PCI-PCI bridge> at device 30.0 on pci0 pci6: <PCI bus> on pcib8 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Ibex Peak AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3020-0x303f mem 0xd0705000-0xd07057ff at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib9: <ACPI Host-PCI bridge> on acpi0 pci7: <ACPI PCI bus> on pcib9 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 hdacc1: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac1 hdaa1: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc1 pcm1: <Cirrus Logic CS4206 (Internal Analog 4.0/2.0)> at nid 10,11 and 13 on hdaa1 pcm2: <Cirrus Logic CS4206 (Rear Analog)> at nid 9 and 12 on hdaa1 pcm3: <Cirrus Logic CS4206 (Rear Digital)> at nid 16 and 15 on hdaa1 ugen2.1: <Intel UHCI root HUB> at usbus2 ugen0.1: <Intel UHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen3.1: <Intel EHCI root HUB> at usbus3 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered bge0: link state changed to UP uhub1: 8 ports with 8 removable, self powered ugen1.2: <vendor 0x0424 product 0x2514> at usbus1 uhub4 on uhub3 uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.03, addr 2> on usbus1 uhub4: MTT enabled ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device cd0 at ahcich1 bus 0 scbus2 target 0 lun 0 cd0: <OPTIARC DVD RW AD-5680H 3AHB> Removable CD-ROM SCSI device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <Mercury Electra 3G SSD R0522A0> ACS-2 ATA SATA 2.x device ada0: Serial Number OW181126100473DEA ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) Trying to mount root from ufs:/dev/ada0p2 [rw]... GEOM_ELI: Device ada0p3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software uhub4: 4 ports with 2 removable, self powered ugen3.2: <vendor 0x0424 product 0x2514> at usbus3 uhub5 on uhub1 uhub5: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.03, addr 2> on usbus3 uhub5: MTT enabled ugen1.3: <Apple Inc. BRCM2046 Hub> at usbus1 uhub6 on uhub4 uhub6: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1 uhub5: 4 ports with 2 removable, self powered lo0: link state changed to UP bge0: link state changed to DOWN uhub6: 3 ports with 0 removable, self powered ugen3.3: <Apple Inc. Built-in iSight> at usbus3 ugen1.4: <Apple Inc. Bluetooth USB Host Controller> at usbus1 ugen3.4: <Apple Computer, Inc. IR Receiver> at usbus3 ugen1.5: <vendor 0x05ac product 0x820a> at usbus1 ukbd0 on uhub6 ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 5> on usbus1 kbd1 at ukbd0 ugen3.5: <vendor 0x04d9 product 0x1400> at usbus3 ukbd1 on uhub5 ukbd1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 5> on usbus3 kbd2 at ukbd1 ugen1.6: <vendor 0x05ac product 0x820b> at usbus1 ugen1.7: <Apple Card Reader> at usbus1 umass0 on uhub4 umass0: <Apple Card Reader, class 0/0, rev 2.00/98.33, addr 7> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:4:0: Attached to scbus4 da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <APPLE SD Card Reader 1.00> Removable Direct Access SCSI device da0: Serial Number 000000009833 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da0: quirks=0x2<NO_6_BYTE> bge0: link state changed to UP ubt0 on uhub6 ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/2.06, addr 4> on usbus1 uhid0 on uhub5 uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 4> on usbus3 ums0 on uhub6 ums0: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 6> on usbus1 ums0: 3 buttons and [XY] coordinates ID=2 ums1 on uhub5 ums1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 5> on usbus3 ums1: 5 buttons and [XYZ] coordinates ID=1 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ugen1.5: <vendor 0x05ac product 0x820a> at usbus1 (disconnected) ukbd0: at uhub6, port 2, addr 5 (disconnected) ukbd0: detached ugen1.6: <vendor 0x05ac product 0x820b> at usbus1 (disconnected) ums0: at uhub6, port 3, addr 6 (disconnected) ums0: detached ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled Security policy loaded: MAC/ntpd (mac_ntpd)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20181222122918.74010adf>