Date: Wed, 20 Oct 1999 16:40:59 -0500 From: "Gregory Samojedny" <samog@mcs.net> To: <aic7xxx@FreeBSD.ORG> Subject: Adaptec 2940U2W and Redhat 6.0 install problem Message-ID: <001901bf1b43$cc4a6690$01020a0a@SAMOG.framework.com>
next in thread | raw e-mail | index | archive | help
Hello,
I am trying to install Redhat 6.0 using the September Redhat boot images on
a machine with the following:
P150
96 MB RAM
Adaptec AHA2940U2W PCI, BIOS 2.20.0
Seagate ST39102LW 9GB Ultra 2 SCSI
Toshiba internal 2x CD-ROM
The Seagate is on the Ultra 2 channel and is terminated on the cable and the
Toshiba is on the ultra channel and is terminated.
When trying to install I receive the following messages when trying to scan
for the scsi card. I've tried the no_probe option but, that seams to freeze
the install. I also tried to remove both the Hard Drive and CD-Rom and just
install using the floppy and the same problem occurs. It appears that just
the mere existence of the AHA2940U2W causes these problems.
Any help would be greatly appreciated.
Greg Samojedny
Samog@mcs.net
<4>scsi : 0 host.
<4>scsi : detected total.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<6>install uses obsolete /proc/pci interface
<6>(scsi0) <Adaptec AHA-294x Ultra2 SCSI host adapter> found at PCI 14.0
<6>(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
<6>(scsi0) Downloading sequencer code... 374 instructions downloaded
<4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.19/3.2.4
<4> <Adaptec AHA-294X Ultra2 SCSI host adapter>
<4>scsi : 1 host.
<4>scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 0x00 00 00 00 00 00
<4>SCSI host 0 abort (pid 0) timed out - resetting
<4>SCSI bus is being reset for host 0 channel 0.
<6>(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15.
<4>SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
<4>SCSI bus is being reset for host 0 channel 0.
<4>SCSI host 0 abort (pid 0) timed out - resetting
<4>SCSI bus is being reset for host 0 channel 0.
<6>(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15.
<4>SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
<4>SCSI bus is being reset for host 0 channel 0.
<4>SCSI host 0 abort (pid 0) timed out - resetting
<4>SCSI bus is being reset for host 0 channel 0.
<6>(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15.
<4>SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
<4>SCSI bus is being reset for host 0 channel 0.
<4>SCSI host 0 abort (pid 0) timed out - resetting
<4>SCSI bus is being reset for host 0 channel 0.
<4>scsi : aborting command due to timeout : pid 20, scsi0, channel 0, id 4,
lun 7 0x00 e0 00 00 00 00
<4>scsi : aborting command due to timeout : pid 21, scsi0, channel 0, id 5,
lun 0 0x00 00 00 00 00 00
Oops: 0000
CPU: 0
EIP: 0010:[<c680a623>]
EFLAGS: 00010046
eax: 00001094 ebx: c02fde00 ecx: c5b35078 edx: 00000000
esi: c5b35078 edi: 00000000 ebp: c681d000 esp: c01dbe98
ds: 0018 es: 0018 ss: 0018
Process swapper (pid:0, process nr: 0, stackpage=c01db000)
Stack: c5b35078 0000000f 0000001a 000000ff 00000006 000000ff c5b35078
00000005
c681d000 c5b35078 00000000 c6812984 c5b35078 c5b2c000 c02fde00
c680b4b4
c5b35078 00000004 c5b35078 00000286 c01ddb68 0000000f 00000001
00000004
Call Trace: [<c681d000>] [<c6812984>] [<c680b4b4>] [<c680b4f0>] [<c0108b09>]
[<c010886d>] [<c0108c24>]
[<c01088a8>] [<c0106361>] [<c0106000>] [<c0106384>] [<c0107a74>]
[<c0106000>] [<c010607b>] [<c0106000>]
[<c0100176>]
Code: 8b 57 04 31 db 8a 5a 40 31 c0 8a 42 42 c1 e0 03 09 c3 3b 94
Aiee, killing interrupt handler
Kernel panic: Attempted to kill the idle task!
In swapper task - not syncing
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001901bf1b43$cc4a6690$01020a0a>