Date: Fri, 12 Nov 1999 13:13:10 +0000 From: Geoff Buckingham <geoffb@chuggalug.clues.com> To: scsi@FreeBSD.ORG Subject: Re: rawio error Message-ID: <19991112131310.B63087@chuggalug.clues.com> In-Reply-To: <19991112113818.A63087@chuggalug.clues.com>; from Geoff Buckingham on Fri, Nov 12, 1999 at 11:38:18AM %2B0000 References: <19991112113818.A63087@chuggalug.clues.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Nov 12, 1999 at 11:38:18AM +0000, Geoff Buckingham wrote: > > I am seeing a number of errors with one particular drive when using rawio, > bot read and write. However I am not seeing any errors going to syslog from > the kernel. Is this something others have seen ? > > > > > Random read Sequential read Random write Sequential write > ID K/sec /sec K/sec /sec K/sec /sec K/sec /sec > anon 1522.3 94 2723.4 166 Child 4 Bad write at 2097414144: 0 of 12288 bytes > 1433.2 89 2055.4 125 > Should add 3.3 stable disk in question da1: avail memory = 30035968 (29332K bytes) Preloaded elf kernel "kernel" at 0xc02b5000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02b509c. Probing for devices on PCI bus 0: iha0: <Initio INI-9XXXU/UW PCI SCSI adapter> rev 0x02 int a irq 9 on pci0.14.0 iha0: Reset SCSI Bus ... fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 11 on pci0.15.0 fxp0: Ethernet address 00:90:27:42:14:bb chip0: <Host to PCI bridge (vendor=1060 device=8881)> rev 0x01 on pci0.16.0 chip1: <PCI to ISA bridge (vendor=1060 device=886a)> rev 0x01 on pci0.18.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1 not found at 0x2f8 wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa wdc0: unit 0 (wd0): <Maxtor 7540 AV>, 32-bit, multi-block-8 wd0: 514MB (1054368 sectors), 1046 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): <Maxtor 7540 AV>, 32-bit, multi-block-8 wd1: 514MB (1054368 sectors), 1046 cyls, 16 heads, 63 S/T, 512 B/S ppc0 not found vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: 387 emulator Waiting 15 seconds for SCSI devices to settle da0 at iha0 bus 0 target 0 lun 0 da0: <SEAGATE ST34572W 0718> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) da1 at iha0 bus 0 target 1 lun 0 da1: <COMPAQ ST32550W 6416> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C) changing root device to wd0s1a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991112131310.B63087>