Date: Thu, 19 Oct 2000 09:28:56 -0700 (PDT) From: jachs@hstsoft.com To: freebsd-gnats-submit@FreeBSD.org Subject: alpha/22128: Cannot install 4.1.1 on an Alpha AS200 Message-ID: <20001019162856.0582E37B4CF@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 22128
>Category: alpha
>Synopsis: Cannot install 4.1.1 on an Alpha AS200
>Confidential: no
>Severity: critical
>Priority: low
>Responsible: freebsd-alpha
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Oct 19 09:30:00 PDT 2000
>Closed-Date:
>Last-Modified:
>Originator: Sergio Jachtchenco
>Release: 4.1.1
>Organization:
HST Systems and TEchnology
>Environment:
-
>Description:
The 4.1.1 sysinst program gets stalled in the initial (half completed) screen. Afer some minutes sysinst seems to perate but it cannot find any disk to label. 4.1 behaves the same. 3.4-Release seems to install ok. NetBSD 1.4.2 is installed and working and OpenBSD 2.5 used to work.
Dmesg from NetBSD:
NetBSD 1.4.2 (GENERIC) #1: Sat Mar 4 03:08:26 PST 2000
toddpw@chewie.toddpw.net:/usr/src/sys/arch/alpha/compile/GENERIC
AlphaStation 200 4/233, 233MHz
8192 byte page size, 1 processor.
real mem = 100663296 (2048000 reserved for PROM, 98615296 used by NetBSD)
avail mem = 82706432
using 1203 buffers containing 9854976 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064A-0 ()
apecs0 at mainbus0: DECchip 21071 Core Logic chipset
apecs0: DC21071-CA pass 2, 64-bit memory bus
apecs0: DC21071-DA pass 2
pci0 at apecs0 bus 0
pci0: i/o enabled, memory enabled
ncr0 at pci0 dev 6 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at isa irq 11
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets, 8 luns per target
sd0 at scsibus0 targ 1 lun 0: <QUANTUM, FIREBALL ST4.3S, 0F04> SCSI2 0/direct fixed
sd0(ncr0:1:0): 10.0 MB/s (100 ns, offset 8)
sd0: 4159MB, 7068 cyl, 6 head, 200 sec, 512 bytes/sect x 8519216 sectors
sd1 at scsibus0 targ 4 lun 0: <SEAGATE, ST32550N, 0014> SCSI2 0/direct fixedsd1(ncr0:4:0): 10.0 MB/s (100 ns, offset 8)
sd1: 2047MB, 3511 cyl, 11 head, 108 sec, 512 bytes/sect x 4194058 sectors
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x43)
de0 at pci0 dev 11 function 0
de0: interrupting at isa irq 5
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:23:5c:9a
vga0 at pci0 dev 12 function 0: Weitek P9000 (rev. 0x03)
wsdisplay0 at vga0
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
root on sd1a dumps on sd1b
root file system type: ffs
de0: enabling 10baseT port
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Try to make an installation in an AS200.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001019162856.0582E37B4CF>