Date: Sat, 12 Jul 2008 02:01:16 +0400 From: Sergey Matveychuk <sem@FreeBSD.org> To: Andriy Gapon <avg@icyb.net.ua> Cc: yuri@tsoft.com, David Southwell <david@vizion2000.net>, freebsd-ports@freebsd.org Subject: Re: portupgrade fails to upgrade the package because the older version is installed Message-ID: <4877D82C.6030309@FreeBSD.org> In-Reply-To: <48777A03.2060205@icyb.net.ua> References: <48753715.10601@tsoft.com> <200807092249.06852.david@vizion2000.net> <4875C5D2.70003@tsoft.com> <48777A03.2060205@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Andriy Gapon wrote: > on 10/07/2008 11:18 Yuri said the following: >> David Southwell wrote: >>> Did you follow the instructions in UPDATING (see below)? >>> They may have some bearing on the problem. >>> ________________________ >>> 20080701: >>> AFFECTS: users of devel/subversion* >>> AUTHOR: Lev Serebryakov <lev@FreeBSD.org> >>> >>> subversion now uses neon-0.28.x (www/neon28) port, and automatic >>> portupgrade will fail because neon26 will conflict with installed >>> neon26. >>> You should upgrade neon library tohgether with subversion with >>> >>> # portupgrade -o www/neon28 neon subversion >>> >>> command. >>> >>> Also, if you use special subversion port with bindings, you >>> should upgrade your port to clean subversion port with >>> >>> # portupgrade -o devel/subversion subversion-\* >>> >>> and install needed bindings (p5-subversion, py-subversion and/or >>> ruby-subversion) after that. >>> >>> If you use subversion with bindings, installed from devel/subversion >>> with custom options, don't forget to install separate bindings ports >>> after subversion upgrade. >>> __________________________- >>> >>> David >>> >> >> No, command "portupgrade -o www/neon28 neon subversion" causes the same >> error message itself. > > Manually deinstall neon26 (you might want to create a backup with > pkg_create -b) and then install neon28 and then proceed as usual with > subversion. > portupgrade -o seems to be broken. > Really? Are you sure you use 2.4.3_2 version? Anyway using -o should be only with one port. It may work not as you expected. -- Dixi. Sem.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4877D82C.6030309>