Date: Sat, 10 Nov 2001 17:25:20 +0100 (CET) From: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> To: freebsd-stable@freebsd.org Subject: FBSD4.4-STABLE SMP broken! Message-ID: <20011110172005.J999-100000@klima.physik.uni-mainz.de>
next in thread | raw e-mail | index | archive | help
I did a cvsupdate today, the target machine was running
stable for the last four days.
After the update and make world today, the system run a few minutes and then
get stuck ... no keyboard input, nothing, no network response.
A similar machine, also a SMP server, but no ServerWorks chipset, seems
to run stable after the same time cvsupdate.
I append the dmesg-output of the faulty machine and that of the working one.
In the past we have had a similar problem on ServerWorks based machines.
The faulty SMP server (stuck after a few minutes):
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #207: Sat Nov 10 17:40:57 CET 2001
root@:/usr/obj/usr/src/sys/ATMOS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (868.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147483648 (2097152K bytes)
avail memory = 2088341504 (2039396K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc0386000.
Pentium Pro MTRR support enabled
Using $PIR table, 12 entries at 0xc00fdf00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 13 -> irq 2
IOAPIC #1 intpin 12 -> irq 16
IOAPIC #1 intpin 4 -> irq 17
IOAPIC #1 intpin 7 -> irq 18
pci0: <PCI bus> on pcib0
pcib3: <PCI to PCI bridge (vendor=1166 device=0005)> at device 0.1 on pci0
IOAPIC #1 intpin 1 -> irq 19
pci1: <PCI bus> on pcib3
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 19
sym0: <896> port 0xf800-0xf8ff mem 0xfeafe000-0xfeafffff,0xfeafac00-0xfeafafff irq 2 at device 1.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <896> port 0xf400-0xf4ff mem 0xfeafc000-0xfeafdfff,0xfeafa800-0xfeafabff irq 16 at device 1.1 on pci0
sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
pcib5: <DEC 21154 PCI-PCI bridge> at device 4.0 on pci0
IOAPIC #1 intpin 3 -> irq 20
IOAPIC #1 intpin 0 -> irq 21
pci2: <PCI bus> on pcib5
pcib6: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2
IOAPIC #1 intpin 2 -> irq 22
pci3: <PCI bus> on pcib6
amr0: <AMI MegaRAID> mem 0xf4000000-0xf7ffffff irq 22 at device 0.0 on pci3
amr0: <Series 471 40 Logical Drive Firmware> Firmware F160, BIOS 3.12, 64MB RAM
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 20
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 2.0 irq 21
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem 0xfeac0000-0xfeadffff,0xfeaf8000-0xfeaf8fff irq 17 at device 5.0 on pci0
fxp0: Ethernet address 00:02:b3:65:74:44
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 18 at device 7.0 on pci0
fxp1: Ethernet address 00:e0:81:00:f0:d7
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 15.1
pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib2
pcib4: <ServerWorks host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib4
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcdfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <6 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x8 on isa0
ppc0: SMC-like chipset (ECP-only) in ECP mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (011031)
IPFW: MOD_LOAD
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
Waiting 3 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
amrd0: <MegaRAID logical drive> on amr0
amrd0: 245014MB (501788672 sectors) RAID 5 (optimal)
SMP: AP CPU #1 Launched!
sa0 at sym1 bus 0 target 5 lun 0
sa0: <HP C5713A H910> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
Mounting root from ufs:/dev/amrd0s1a
ch0 at sym1 bus 0 target 5 lun 1
ch0: <HP C5713A H910> Removable Changer SCSI-2 device
ch0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
ch0: 6 slots, 1 drive, 0 pickers, 0 portals
cd0 at sym1 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
link_elf: symbol splash_register undefined
fxp0: promiscuous mode enabled
And this is the dmesg-output of the running and working SMP machine:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #157: Sat Nov 10 16:53:47 CET 2001
root@klima.physik.uni-mainz.de:/usr/obj/usr/src/sys/KLIMA
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (803.60-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1073725440 (1048560K bytes)
avail memory = 1041354752 (1016948K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03e3000.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00f12d0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 18 -> irq 2
IOAPIC #0 intpin 19 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA 85C586 ATA controller> at 4.1
pci0: <VIA 83C572 USB controller> at 4.2 irq 2
pci0: <VIA 83C572 USB controller> at 4.3 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb83f mem 0xf1800000-0xf18fffff,0xf2000000-0xf2000fff irq 10 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:b7:06:6e:78
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <DEC 21154 PCI-PCI bridge> at device 11.0 on pci0
pci2: <PCI bus> on pcib3
pcib4: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2
IOAPIC #0 intpin 17 -> irq 13
pci3: <PCI bus> on pcib4
amr0: <AMI MegaRAID> mem 0xf4000000-0xf5ffffff irq 13 at device 0.0 on pci3
amr0: <Series 493 40 Logical Drive Firmware> Firmware F160, BIOS 3.12, 32MB RAM
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 2
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x9800-0x98ff mem 0xf0800000-0xf0800fff irq 11 at device 12.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
pcib1: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <8 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x8 on isa0
ppc0: SMC-like chipset (ECP-only) in ECP mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPFW: MOD_LOAD
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
DUMMYNET initialized (011031)
IPsec: Initialized Security Association Processing.
Waiting 4 seconds for SCSI devices to settle
amrd0: <MegaRAID logical drive> on amr0
amrd0: 43735MB (89569280 sectors) RAID 5 (optimal)
SMP: AP CPU #1 Launched!
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <HP C5683A C005> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Mounting root from ufs:/dev/amrd0s1a
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
link_elf: symbol splash_register undefined
nfs server atmos:/usr/homes: not responding
nfs server atmos:/usr/homes: is alive again
--
MfG
O. Hartmann
ohartman@klima.physik.uni-mainz.de
----------------------------------------------------------------
IT-Administration des Institutes fuer Physik der Atmosphaere (IPA)
----------------------------------------------------------------
Johannes Gutenberg Universitaet Mainz
Becherweg 21
55099 Mainz
Tel: +496131/3924662 (Maschinenraum)
Tel: +496131/3924144
FAX: +496131/3923532
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011110172005.J999-100000>