Date: Thu, 19 Sep 1996 08:46:11 -0400 (EDT) From: "H. Jared Agnew" <jagnew@csugrad.cs.vt.edu> To: freebsd-questions@freebsd.org Subject: Compile errors??? Message-ID: <199609191246.IAA30613@csugrad.cs.vt.edu>
next in thread | raw e-mail | index | archive | help
I'm currently running snapshot 050196, I would like to upgrade to 2.1.5-RELEASE. I
have down-loaded all the source, and first tried to make a new kernel. The errors I get
are the errors having to do with line 82 of the param.c file. I realize that I may
be getting these errors because the distribution I have on my machine is pre 2.1.5-
RELEASE, however I'm also unable to do a make world. If nobody can answer this question
I will post the error I get when I do a make world. ( I would do it now, but I don't
have them ;) Any help would be greatly appreciated. Thanks
--- Jared
--jared@vt.edu
BTW: my config file is fine, a friend of mine compiled with it fine. I included it
for all you sceptics out there. ;)
: param.c:82: `TIMEZONE' undeclared here (not in a function)
: param.c:82: initializer element for `tz.tz_minuteswest' is not constant
: param.c:82: `DST' undeclared here (not in a function)
: param.c:82: initializer element for `tz.tz_dsttime' is not constant
: *** Error code 1
: machine "i386"
: cpu "I586_CPU"
: ident HJAKERNEL
: maxusers 10
: options INET #InterNETworking
: options FFS #Berkeley Fast Filesystem
: options NFS #Network Filesystem
: options MSDOSFS #MSDOS Filesystem
: options "CD9660" #ISO 9660 Filesystem
: options PROCFS #Process filesystem
: options "COMPAT_43" #Compatible with BSD 4.3
: #options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
: options BOUNCE_BUFFERS #include support for DMA bounce buffers
: options UCONSOLE #Allow users to grab the console
: options SYSVSHM
: options SYSVSEM
: options SYSVMSG
: config kernel root on wd0
: controller isa0
: controller eisa0
: controller pci0
: controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
: disk fd0 at fdc0 drive 0
: controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
: disk wd0 at wdc0 drive 0
: controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
: options ATAPI #Enable ATAPI support for IDE bus
: device wcd0 #IDE CD-ROM
: controller aha0 at isa? port "IO_AHA0" bio irq ? drq 6 vector ahaintr
: controller scbus0
: device sd0
: device st0
: device cd0 #Only need one of these, the code dynamically grows
: # syscons is the default console driver, resembling an SCO console
: device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
: # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
: #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
: #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
: options XSERVER # include code for XFree86
: # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
: #options PCVT_SCANSET=2 # IBM keyboards are non-std
: # Mandatory, don't remove
: device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
: #
: # Laptop support (see LINT for more options)
: #
: #device apm0 at isa? # Advanced Power Management
: #options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
: device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
: device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
: device lpt0 at isa? port? tty irq 7 vector lptintr
: device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vecto
: r psmintr
: controller snd0
: device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr
: device sbxvi0 at isa? drq 5
: device sbmidi0 at isa? port 0x330
: # Order is important here due to intrusive probes, do *not* alphabetize
: # this list of network interfaces until the probes have been fixed.
: # Right now it appears that the ie0 must be probed before ep0. See
: # revision 1.20 of this file.
: device ep0 at isa? port 0x300 net irq 10 vector epintr
:
: pseudo-device loop
: pseudo-device ether
: pseudo-device log
: pseudo-device sl 1
: # ijppp uses tun instead of ppp device
: pseudo-device ppp 2
: pseudo-device tun 2
: pseudo-device pty 16
: pseudo-device bpfilter 4
: pseudo-device snp 4
: pseudo-device gzip # Exec gzipped a.out's
----- End of forwarded message from H. Jared Agnew -----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199609191246.IAA30613>