Date: Thu, 20 May 2021 12:44:36 -0500 From: Mark Kane <mark@kane.mn> To: freebsd-usb@freebsd.org Subject: eGalax USB touchscreen issues Message-ID: <cd7bd8d9eb9bee6cdc7e4d416b7b8153@kane.mn>
next in thread | raw e-mail | index | archive | help
Hi, I'm trying to get an eGalax USB touchscreen working on FreeBSD 13.0-RELEASE and several approaches have been unsuccessful. 1) uep(4) in evdev or native mode - uep.ko automatically loads and attaches. X uses the respective evdev or egalax input driver however no events are registered with `xinput --test` or evemu-record. [1] suggests uep(4) is for older non-HID devices and the vendor reused the same device IDs for newer HID devices, so a different driver may be correct for this device. [1] https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=183032 ugen0.3: <eGalax Inc. USB TouchController> at usbus0 uep0: <eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3> on usbus0 2) uhid(4) - With uep(4) disabled, uhid(4) attempts to attach but fails: kernel: ugen0.3: <eGalax Inc. USB TouchController> at usbus0 kernel: uhid1 on uhub1 kernel: uhid1: <eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3> on usbus0 kernel: uhid1: no report descriptor kernel: device_attach: uhid1 attach returned 12 3) uhidd(8) - With uhid(4) disabled, this is the only method that any touchscreen events have been seen but there are issues. Sometimes starting uhidd will fail the first couple times ("libusb20_dev_request_sync failed" the first, crash the second) and then start OK after a few tries. When it is running uhidd prints touchscreen events with -v but X didn't autodetect the /dev/uvhid* device or if symlinked to /dev/uhid*. If the X "mouse" driver is configured with the uvhid device X will segfault upon startup citing mouse_drv.so. 4) wmt(4) - wmt.ko automatically loads but does not attach or create any evdev devices. 5) `webcamd -l` shows the device but exits on startup with "Cannot find USB device". Should this device work with uhid(4) or wmt(4) and does the below output give any clues what might be going wrong? If uhidd(8) or webcamd is what should be used instead are there any issues with my config? The device itself should be okay, it works out of the box on OpenBSD and the vendor provides drivers for Linux. Thanks in advance for any pointers. -Mark # usbconfig ugen0.1: <Intel EHCI root HUB> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.3: <eGalax Inc. USB TouchController> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) ugen0.4: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA) # # usbhid-dump 000:003:000:DESCRIPTOR 1621478496.823720 8D 0F 00 09 42 09 32 15 00 25 01 95 02 75 01 81 02 95 06 75 01 81 03 05 01 09 30 75 10 95 01 A4 55 00 65 00 36 00 00 46 00 00 16 1E 00 26 C8 0F 81 02 09 31 16 3C 00 26 000:004:001:DESCRIPTOR 1621478496.826074 05 0C 09 01 A1 01 85 01 19 00 2A 3C 02 15 00 26 3C 02 95 01 75 10 81 00 C0 05 01 09 80 A1 01 85 02 19 81 29 83 25 01 75 01 95 03 81 02 95 05 81 01 C0 000:004:000:DESCRIPTOR 1621478496.829067 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 95 08 75 01 81 02 95 08 75 01 81 01 05 08 19 01 29 03 95 03 75 01 91 02 95 01 75 05 91 01 05 07 19 00 2A FF 00 15 00 26 FF 00 95 06 75 08 81 00 C0 # # usbconfig -d ugen0.3 dump_all_desc ugen0.3: <eGalax Inc. USB TouchController> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x0eef idProduct = 0x0001 bcdDevice = 0x0100 iManufacturer = 0x0001 <eGalax Inc.> iProduct = 0x0002 <USB TouchController> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0022 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0001 <eGalax Inc.> bmAttributes = 0x00a0 bMaxPower = 0x0032 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0003 <HID device> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0000 <no string> Additional Descriptor bLength = 0x09 bDescriptorType = 0x21 bDescriptorSubType = 0x10 RAW dump: 0x00 | 0x09, 0x21, 0x10, 0x02, 0x00, 0x01, 0x22, 0x8d, 0x08 | 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0008 bInterval = 0x0003 bRefresh = 0x0000 bSynchAddress = 0x0000 # ----------------------- uhidd sees events: # /usr/local/sbin/uhidd -kmohsuvvv /dev/ugen0.3 uhidd 1292 - - open /usr/local/etc/uhidd.conf failed: No such file or directory uhidd 1292 - - proceed without configuration file ugen0.3[0]-> HID interface ugen0.3[0]-> Report descriptor size = 141 ugen0.3[0]-> Find IN interrupt ep: 0x81 packet_size=0x8 HID APPLICATION COLLECTION (Pointer) size(63) HID REPORT: ID 1 INPUT: POS:0 SIZE:1 COUNT:2 [VARIABLE] USAGE Button1 USAGE Button2 POS:2 SIZE:6 COUNT:1 [CONST] POS:8 SIZE:16 COUNT:2 [VARIABLE] USAGE X USAGE Y HID APPLICATION COLLECTION (Touch Screen) size(78) HID REPORT: ID 2 INPUT: POS:0 SIZE:1 COUNT:2 [VARIABLE] USAGE Tip Switch USAGE In Range POS:2 SIZE:1 COUNT:6 [CONST] POS:8 SIZE:16 COUNT:1 [VARIABLE] USAGE X POS:24 SIZE:16 COUNT:1 [VARIABLE] USAGE Y uhidd 1292 - - cuse initiailzed. ugen0.3[0]-> vhid device created: uvhid0 ugen0.3[0]-> vhid device created: uvhid1 ugen0.3[0]-> HID interface task started [...start touching screen...] ugen0.3[0]-> received data(6): 02 03 -7 03 -8 10 hid_appcol_recv_data: len(6) 0x02 0x03 0xf9 0x03 0xf8 0x0a ugen0.3[0]-> uvhid1 received data: 2 3 249 3 248 10 ugen0.3[0]-> received data(6): 02 03 -7 03 -13 10 hid_appcol_recv_data: len(6) 0x02 0x03 0xf9 0x03 0xf3 0x0a ugen0.3[0]-> uvhid1 received data: 2 3 249 3 243 10 ugen0.3[0]-> received data(6): 02 02 -7 03 -13 10 hid_appcol_recv_data: len(6) 0x02 0x02 0xf9 0x03 0xf3 0x0a ugen0.3[0]-> uvhid1 received data: 2 2 249 3 243 10 ugen0.3[0]-> received data(6): 02 03 -30 03 00 11 hid_appcol_recv_data: len(6) 0x02 0x03 0xe2 0x03 0x00 0x0b ugen0.3[0]-> uvhid1 received data: 2 3 226 3 0 11 ugen0.3[0]-> received data(6): 02 03 -39 03 09 11 [... more events ...] # however X crashes with uhidd and xf86-input-mouse: [...] [ 151.396] (II) Using input driver 'mouse' for 'Touch0' [ 151.397] (**) Option "SendCoreEvents" [ 151.397] (**) Option "CorePointer" "on" [ 151.397] (**) Touch0: always reports core events [ 151.397] (**) Option "Protocol" "usb" [ 151.397] (**) Option "Device" "/dev/uvhid1" [ 151.397] (**) Touch0: Protocol: usb [ 151.397] (**) Touch0: always reports core events [ 151.397] (==) Touch0: Opening new HID device [ 151.398] (==) Touch0: Found 1 usable logical collections [ 151.398] (**) Option "Collection" "2" [ 151.398] (**) Touch0: Collection: 2 [ 151.398] (EE) Touch0: Application collection not found or already handled [ 151.398] (**) Touch0: Protocol: "usb" [ 151.398] (II) XINPUT: Adding extended input device "Touch0" (type: MOUSE, id 7) [ 151.399] (EE) [ 151.399] (EE) Backtrace: [ 151.402] (EE) 0: /usr/local/bin/Xorg (?+0x0) [0x41dd9a] [ 151.404] (EE) unw_get_proc_name failed: no unwind info found [-10] [ 151.404] (EE) 1: /lib/libthr.so.3 (?+0x0) [0x800928e0e] [ 151.407] (EE) unw_get_proc_name failed: no unwind info found [-10] [ 151.407] (EE) 2: /lib/libthr.so.3 (?+0x0) [0x8009283cf] [ 151.409] (EE) 3: ? (?+0x0) [0x7ffffffff003] [ 151.412] (EE) 4: /usr/local/lib/xorg/modules/input/mouse_drv.so (?+0x0) [0x801cef5ff] [ 151.415] (EE) 5: /usr/local/bin/Xorg (?+0x0) [0x292bfc] [ 151.417] (EE) 6: /usr/local/bin/Xorg (?+0x0) [0x2f0ed8] [ 151.420] (EE) 7: /usr/local/bin/Xorg (?+0x0) [0x2e6961] [ 151.422] (EE) 8: /usr/local/bin/Xorg (?+0x0) [0x2a1a5f] [ 151.425] (EE) 9: /usr/local/bin/Xorg (?+0x0) [0x28a420] [ 151.427] (EE) 10: ? (?+0x0) [0x800458008] [ 151.427] (EE) [ 151.427] (EE) Segmentation fault at address 0x0 [ 151.428] (EE) Fatal server error: [ 151.428] (EE) Caught signal 11 (Segmentation fault). Server aborting Section "InputDevice" Identifier "Touch0" Driver "mouse" Option "Protocol" "usb" Option "Device" "/dev/uvhid1" EndSection Sometimes uhidd has problems starting but then works on the 3rd or 4th try: # uhidd -dD -vvv -kmohu /dev/ugen0.3 uhidd 1808 - - open /usr/local/etc/uhidd.conf failed: No such file or directory uhidd 1808 - - proceed without configuration file ugen0.3[0]-> HID interface ugen0.3[0]-> Report descriptor size = 141 uhidd 1808 - - ugen0.3[0]=> libusb20_dev_request_sync failed # uhidd -dD -vvv -kmohu /dev/ugen0.3 uhidd 1809 - - open /usr/local/etc/uhidd.conf failed: No such file or directory uhidd 1809 - - proceed without configuration file ugen0.3[0]-> HID interface ugen0.3[0]-> Report descriptor size = 141 ugen0.3[0]-> Report descriptor dump: illegal type (bType=3) illegal Main Item (bTag=0) ugen0.3[0]-> Find IN interrupt ep: 0x81 packet_size=0x8 uhidd: hid_parser: unknown bType(3) uhidd: hid_parser: unknown Main item(0) Assertion failed: (ha != NULL), function hid_parser_init, file uhidd_hidcore.c, line 380. Abort (core dumped) # uhidd -dD -vvv -kmohu /dev/ugen0.3 uhidd 1810 - - open /usr/local/etc/uhidd.conf failed: No such file or directory uhidd 1810 - - proceed without configuration file ugen0.3[0]-> HID interface ugen0.3[0]-> Report descriptor size = 141 uhidd 1810 - - ugen0.3[0]=> libusb20_dev_request_sync failed # uhidd -dD -vvv -kmohu /dev/ugen0.3 uhidd 1811 - - open /usr/local/etc/uhidd.conf failed: No such file or directory uhidd 1811 - - proceed without configuration file ugen0.3[0]-> HID interface ugen0.3[0]-> Report descriptor size = 141 ugen0.3[0]-> Report descriptor dump: USAGE PAGE Generic Desktop(0x1) USAGE Pointer(0x1)[Generic Desktop(0x1)] COLLECTION Application(1) REPORT ID 1 USAGE Pointer(0x1)[Generic Desktop(0x1)] COLLECTION Physical(0) USAGE PAGE Button(0x9) USAGE MINIMUM Button1(1) USAGE MAXIMUM Button2(2) LOGICAL MINIMUM 0 LOGICAL MAXIMUM 1 REPORT COUNT 2 REPORT SIZE 1 INPUT ( Data Variable Absolute ) (2) REPORT COUNT 1 REPORT SIZE 6 INPUT ( Const Array Absolute ) (1) USAGE PAGE Generic Desktop(0x1) USAGE X(0x30)[Generic Desktop(0x1)] USAGE Y(0x31)[Generic Desktop(0x1)] LOGICAL MINIMUM 42 LOGICAL MAXIMUM 1981 PHYSICAL MINIMUM 0 PHYSICAL MAXIMUM 4095 UNIT (0) REPORT SIZE 16 REPORT COUNT 2 INPUT ( Data Variable Absolute ) (2) END COLLECTION END COLLECTION USAGE PAGE Digitizer(0xd) USAGE Touch Screen(0x4)[Digitizer(0xd)] COLLECTION Application(1) REPORT ID 2 USAGE Stylus(0x20)[Digitizer(0xd)] COLLECTION Physical(0) USAGE Tip Switch(0x42)[Digitizer(0xd)] USAGE In Range(0x32)[Digitizer(0xd)] LOGICAL MINIMUM 0 LOGICAL MAXIMUM 1 REPORT COUNT 2 REPORT SIZE 1 INPUT ( Data Variable Absolute ) (2) REPORT COUNT 6 REPORT SIZE 1 INPUT ( Const Variable Absolute ) (3) USAGE PAGE Generic Desktop(0x1) USAGE X(0x30)[Generic Desktop(0x1)] REPORT SIZE 16 REPORT COUNT 1 PUSH UNIT EXPONENT 0 UNIT (0) PHYSICAL MINIMUM 0 PHYSICAL MAXIMUM 0 LOGICAL MINIMUM 30 LOGICAL MAXIMUM 4040 INPUT ( Data Variable Absolute ) (2) USAGE Y(0x31)[Generic Desktop(0x1)] LOGICAL MINIMUM 60 LOGICAL MAXIMUM 4035 PHYSICAL MINIMUM 0 PHYSICAL MAXIMUM 0 INPUT ( Data Variable Absolute ) (2) POP END COLLECTION END COLLECTION ugen0.3[0]-> Find IN interrupt ep: 0x81 packet_size=0x8 HID APPLICATION COLLECTION (Pointer) size(63) HID REPORT: ID 1 INPUT: POS:0 SIZE:1 COUNT:2 [VARIABLE] USAGE Button1 USAGE Button2 POS:2 SIZE:6 COUNT:1 [CONST] POS:8 SIZE:16 COUNT:2 [VARIABLE] USAGE X USAGE Y HID APPLICATION COLLECTION (Touch Screen) size(78) HID REPORT: ID 2 INPUT: POS:0 SIZE:1 COUNT:2 [VARIABLE] USAGE Tip Switch USAGE In Range POS:2 SIZE:1 COUNT:6 [CONST] POS:8 SIZE:16 COUNT:1 [VARIABLE] USAGE X POS:24 SIZE:16 COUNT:1 [VARIABLE] USAGE Y ugen0.3[0]-> Kernel driver is active ugen0.3[0]-> kernel driver detached! uhidd 1811 - - Attempt to load kernel module cuse.ko... uhidd 1811 - - Successfully loaded cuse kernel module uhidd 1811 - - cuse initiailzed. ugen0.3[0]-> vhid device created: uvhid0 ugen0.3[0]-> vhid device created: uvhid1 ugen0.3[0]-> HID interface task started ----------------------- # webcamd -d ugen0.3 webcamd 1415 - - Attached to ugen0.3[0] webcamd 1415 - - webcamd: Cannot find USB device # ----------------------- uep(4) with evdev: # evemu-describe Available devices: /dev/input/event0: System mouse /dev/input/event1: System keyboard multiplexer /dev/input/event2: Power Button /dev/input/event3: Sleep Button /dev/input/event4: Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.09, add /dev/input/event5: eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3 Select the device event number [0-5]: 5 # EVEMU 1.3 # Kernel: 13.0-RELEASE # Input device name: "eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3" # Input device ID: bus 0x03 vendor 0xeef product 0x01 version 0000 # Supported events: # Event type 0 (EV_SYN) # Event code 0 (SYN_REPORT) # Event code 1 (SYN_CONFIG) # Event code 2 (SYN_MT_REPORT) # Event code 3 (SYN_DROPPED) # Event code 4 ((null)) # Event code 5 ((null)) # Event code 6 ((null)) # Event code 7 ((null)) # Event code 8 ((null)) # Event code 9 ((null)) # Event code 10 ((null)) # Event code 11 ((null)) # Event code 12 ((null)) # Event code 13 ((null)) # Event code 14 ((null)) # Event code 15 (SYN_MAX) # Event type 1 (EV_KEY) # Event code 330 (BTN_TOUCH) # Event type 3 (EV_ABS) # Event code 0 (ABS_X) # Value 0 # Min 0 # Max 2047 # Fuzz 0 # Flat 0 # Resolution 0 # Event code 1 (ABS_Y) # Value 0 # Min 0 # Max 2047 # Fuzz 0 # Flat 0 # Resolution 0 # Properties: # Property type 1 (INPUT_PROP_DIRECT) N: eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3 I: 0003 0eef 0001 0000 P: 02 00 00 00 00 00 00 00 B: 00 0b 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 04 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 01 00 00 00 00 00 00 00 00 B: 02 00 00 00 00 00 00 00 00 B: 03 03 00 00 00 00 00 00 00 B: 04 00 00 00 00 00 00 00 00 B: 05 00 00 00 00 00 00 00 00 B: 11 00 00 00 00 00 00 00 00 B: 12 00 00 00 00 00 00 00 00 B: 14 00 00 00 00 00 00 00 00 B: 15 00 00 00 00 00 00 00 00 B: 15 00 00 00 00 00 00 00 00 A: 00 0 2047 0 0 0 A: 01 0 2047 0 0 0 # # libinput list-devices [...] Device: eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3 Kernel: /dev/input/event5 Group: 6 Seat: seat0, default Capabilities: touch Tap-to-click: n/a Tap-and-drag: n/a Tap drag lock: n/a Left-handed: n/a Nat.scrolling: n/a Middle emulation: n/a Calibration: identity matrix Scroll methods: none Click methods: none Disable-w-typing: n/a Accel profiles: n/a Rotation: n/a # X log for uep(4) in evdev mode: [ 291.398] (II) config/udev: Adding input device eGalax Inc. USB TouchController (/dev/input/event5) [ 291.398] (**) eGalax Inc. USB TouchController: Applying InputClass "evdev touchscreen catchall" [ 291.398] (**) eGalax Inc. USB TouchController: Applying InputClass "libinput touchscreen catchall" [ 291.398] (II) Using input driver 'libinput' for 'eGalax Inc. USB TouchController' [ 291.398] (**) eGalax Inc. USB TouchController: always reports core events [ 291.398] (**) Option "Device" "/dev/input/event5" [ 291.398] (**) Option "_source" "server/udev" [ 291.401] (II) event5 - eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3: is tagged by udev as: Touchscreen [ 291.402] (II) event5 - eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3: device is a touch device [ 291.403] (II) event5 - eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3: device removed [ 291.403] (**) Option "config_info" "udev:/dev/input/event5" [ 291.403] (II) XINPUT: Adding extended input device "eGalax Inc. USB TouchController" (type: TOUCHSCREEN, id 11) [ 291.403] (**) Option "AccelerationScheme" "none" [ 291.403] (**) eGalax Inc. USB TouchController: (accel) selected scheme none/0 [ 291.403] (**) eGalax Inc. USB TouchController: (accel) acceleration factor: 2.000 [ 291.403] (**) eGalax Inc. USB TouchController: (accel) acceleration threshold: 4 [ 291.406] (II) event5 - eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3: is tagged by udev as: Touchscreen [ 291.407] (II) event5 - eGalax Inc. USB TouchController, class 0/0, rev 1.10/1.00, addr 3: device is a touch device xinput uep(4) evdev test: % xinput --list ⎡ Virtual core pointer id=2 [master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ System mouse id=6 [slave pointer (2)] ⎜ ↳ eGalax Inc. USB TouchController id=11 [slave pointer (2)] ⎣ Virtual core keyboard id=3 [master keyboard (2)] ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)] ↳ System keyboard multiplexer id=7 [slave keyboard (3)] ↳ Power Button id=8 [slave keyboard (3)] ↳ Sleep Button id=9 [slave keyboard (3)] ↳ Lite-On Technology Corp. USB Multimedia Keyboard id=10 [slave keyboard (3)] % xinput --test 11 [...no events...] ^C % dmesg: Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(vga): resolution 640x480 CPU: Intel(R) Atom(TM) CPU E3845 @ 1.91GHz (1916.71-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30679 Family=0x6 Model=0x37 Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28000800<SYSCALL,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 1907458048 (1819 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) ioapic0 <Version 2.0> irqs 0-86 Launching APs: 3 2 1 Timecounter "TSC" frequency 1916713993 Hz quality 1000 KTLS: Initialized 4 threads random: entropy device external interface 000.000019 [4354] netmap_init netmap: loaded module [ath_hal] loaded WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd0 at kbdmux0 mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) nexus0 vtvga0: <VT VGA driver> cryptosoft0: <software crypto> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: Length mismatch for 3 range: 50d06fff vs 50d07000 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xd0d06000-0xd0d067ff irq 19 at device 19.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel BayTrail HDA Controller> mem 0xd0d00000-0xd0d03fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xd0a00000-0xd0afffff,0xd0b00000-0xd0b03fff irq 16 at device 0.0 on pci1 igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 4 RX queues 4 TX queues igb0: Using MSI-X interrupts with 5 vectors igb0: Ethernet address: 00:10:f3:9c:6b:7c igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib3 pci2: <simple comms, UART> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib4 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xd0700000-0xd07fffff,0xd0800000-0xd0803fff irq 19 at device 0.0 on pci3 igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 4 RX queues 4 TX queues igb1: Using MSI-X interrupts with 5 vectors igb1: Ethernet address: 00:10:f3:9c:6b:7d igb1: netmap queues/slots: TX 4/1024, RX 4/1024 ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0d05000-0xd0d053ff irq 23 at device 29.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 ppc1: <Parallel port> port 0x378-0x37f irq 15 on acpi0 ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart2: <16950 or compatible> port 0x248-0x24f irq 5 on acpi0 uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart3: <16950 or compatible> port 0x3e8-0x3ef irq 11 on acpi0 uart4: <16950 or compatible> port 0x2e8-0x2ef irq 10 on acpi0 uart5: <16950 or compatible> port 0x228-0x22f irq 6 on acpi0 uart6: <16950 or compatible> port 0x238-0x23f irq 7 on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24 on hdaa0 pcm1: <Realtek ALC888 (Analog)> at nid 21 and 26 on hdaa0 hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (5) in association 1! Disabling association. hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SA400S37120G SBFKB1E1> ACS-3 ATA SATA 3.x device ada0: Serial Number 50026B768365A54C ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) Trying to mount root from ufs:/dev/ada0s1a [rw]... ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ichsmb0: <Intel Baytrail SMBus controller> port 0xe000-0xe01f mem 0xd0d04000-0xd0d0401f irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 lo0: link state changed to UP uhub0: 8 ports with 8 removable, self powered ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.17, addr 2> on usbus0 uhub1: 4 ports with 4 removable, self powered igb1: link state changed to UP ugen0.3: <eGalax Inc. USB TouchController> at usbus0 ugen0.4: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus0 ukbd0 on uhub1 ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.09, addr 4> on usbus0 kbd1 at ukbd0 ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 5> on usbus0 uhub2: 4 ports with 4 removable, self powered
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cd7bd8d9eb9bee6cdc7e4d416b7b8153>