From owner-freebsd-stable@FreeBSD.ORG Thu Jan 26 21:22:21 2006 Return-Path: X-Original-To: freebsd-stable@freebsd.org Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 32D4B16A422 for ; Thu, 26 Jan 2006 21:22:21 +0000 (GMT) (envelope-from freebsd-stable@m.gmane.org) Received: from ciao.gmane.org (main.gmane.org [80.91.229.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7570C43D45 for ; Thu, 26 Jan 2006 21:22:19 +0000 (GMT) (envelope-from freebsd-stable@m.gmane.org) Received: from list by ciao.gmane.org with local (Exim 4.43) id 1F2EZ9-0007Xc-Rb for freebsd-stable@freebsd.org; Thu, 26 Jan 2006 22:22:04 +0100 Received: from murdoc.gwi.net ([207.5.142.8]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 26 Jan 2006 22:22:03 +0100 Received: from jcoombs by murdoc.gwi.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 26 Jan 2006 22:22:03 +0100 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-stable@freebsd.org From: "Joshua Coombs" Date: Thu, 26 Jan 2006 16:21:53 -0500 Lines: 204 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: murdoc.gwi.net X-MSMail-Priority: Normal X-Newsreader: Microsoft Outlook Express 6.00.2900.2527 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2527 Sender: news Subject: Adaptec SCSI going nuts X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 26 Jan 2006 21:22:21 -0000 Just got a dual Opteron system to play with amd64 builds of FreeBSD. Poking around to see how it behaived, I initially tossed FreeBSD 4.11 on it, and was surprised to see a dump of the scsi controller state at the end of the dmesg. Tried 6.0-Rel, both x86 and amd64, same behavior. Bumped up to 6-stable from yesterday, same behavior. After the dump, the system appears solid, no other errors, so I'm guessing it's just a problem with how the card is initialized, FreeBSD corrects it and moves on. Should I be more concerned, or consider it a quirk of the machine? Joshua Coombs Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE-p4 #0: Thu Jan 26 15:55:58 EST 2006 root@testbed.gwi.net:/usr/obj/usr/src/sys/SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 246 (1994.67-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff AMD Features=0xe0500800 real memory = 1073676288 (1023 MB) avail memory = 1024929792 (977 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-27 on motherboard ioapic2 irqs 28-31 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) pci_link0: irq 9 on acpi0 pci_link1: irq 10 on acpi0 pci_link2: irq 11 on acpi0 pci_link3: irq 15 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 cpu1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 6.0 on pci0 pci3: on pcib1 pci3: at device 6.0 (no driver attached) fxp0: port 0xbc00-0xbc3f mem 0xfeafb000-0xfeafbfff,0xfeaa0000-0xfeabffff irq 18 at device 8.0 on pci3 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:81:34:64:da isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: on atapci0 ata1: on atapci0 pci0: at device 7.2 (no driver attached) pci0: at device 7.3 (no driver attached) pcib2: at device 10.0 on pci0 pci2: on pcib2 ahd0: port 0x8000-0x80ff,0x7800-0x78ff mem 0xfc8fc000-0xfc8fdfff irq 24 at device 6.0 on pci2 ahd0: [GIANT-LOCKED] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs ahd1: port 0x8800-0x88ff,0x8400-0x84ff mem 0xfc8fe000-0xfc8fffff irq 25 at device 6.1 on pci2 ahd1: [GIANT-LOCKED] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs bge0: mem 0xfc8b0000-0xfc8bffff,0xfc8a0000-0xfc8affff irq 24 at device 9.0 on pci2 miibus1: on bge0 brgphy0: on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:e0:81:34:65:28 bge1: mem 0xfc8e0000-0xfc8effff,0xfc8d0000-0xfc8dffff irq 25 at device 9.1 on pci2 miibus2: on bge1 brgphy1: on miibus2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:e0:81:34:65:29 pci0: at device 10.1 (no driver attached) pcib3: at device 11.0 on pci0 pci1: on pcib3 pci0: at device 11.1 (no driver attached) acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: at iomem 0xc0000-0xc7fff on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle acd0: CDROM at ata0-slave PIO4 ahd0: Invalid Sequencer interrupt occurred. >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahd0: Dumping Card State at program address 0x23c Mode 0x0 Card was paused INTSTAT[0x0] SELOID[0x1] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2) SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x2] KERNEL_QFREEZE_COUNT[0x2] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xe NEXTSCB 0xff40 qinstart = 28 qinfifonext = 28 QINFIFO: WAITING_TID_QUEUES: Pending list: Total 0 Kernel Free SCB list: 15 14 1 2 3 4 5 6 7 8 9 10 11 12 13 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xf SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xe SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0xf 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) ahd0: REG0 == 0x8f60, SINDEX = 0x10e, DINDEX = 0x104 ahd0: SCBPTR == 0xf, SCB_NEXT == 0xff40, SCB_NEXT2 == 0xe CDB 12 20 0 80 88 e6 STACK: 0x237 0x2 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 SMP: AP CPU #1 Launched! da0 at ahd0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da1 at ahd0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) Trying to mount root from ufs:/dev/da0s1a