From owner-svn-src-head@freebsd.org Fri Jul 3 06:09:57 2015 Return-Path: Delivered-To: svn-src-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B02469922BF; Fri, 3 Jul 2015 06:09:57 +0000 (UTC) (envelope-from adrian@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2001:1900:2254:2068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id A013020DD; Fri, 3 Jul 2015 06:09:57 +0000 (UTC) (envelope-from adrian@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.70]) by repo.freebsd.org (8.14.9/8.14.9) with ESMTP id t6369v7I086564; Fri, 3 Jul 2015 06:09:57 GMT (envelope-from adrian@FreeBSD.org) Received: (from adrian@localhost) by repo.freebsd.org (8.14.9/8.14.9/Submit) id t6369viV086562; Fri, 3 Jul 2015 06:09:57 GMT (envelope-from adrian@FreeBSD.org) Message-Id: <201507030609.t6369viV086562@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: adrian set sender to adrian@FreeBSD.org using -f From: Adrian Chadd Date: Fri, 3 Jul 2015 06:09:57 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r285079 - head/sys/mips/conf X-SVN-Group: head MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-src-head@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: SVN commit messages for the src tree for head/-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Jul 2015 06:09:57 -0000 Author: adrian Date: Fri Jul 3 06:09:56 2015 New Revision: 285079 URL: https://svnweb.freebsd.org/changeset/base/285079 Log: Add initial support for the TP-Link Archer C7 v2. The SoC, the flash, the ethernet ports and ethernet switch all work. The USB works. The 11ac PCIe NIC internally is at least seen by the PCIE RC, but I haven't tried using it yet. There's no driver and I haven't yet swapped it out for a non-11ac chip. The on-chip 2GHz wifi works, but there are some data errors that get thrown up in STA mode when scanning. I have a feeling I have to finish the DDR flush code out and have it run correctly on the shared interrupts; that'll take a bit of time to get right. But if you're after an updated piece of hardware, the Archer C7 v2 is certainly there, and you can replace the 11ac NIC with a 3x3 Atheros PCIe device (eg AR9380, AR9390, AR9580, etc) and it'll "just work". Tested: * TP-Link archer c7v2. Added: head/sys/mips/conf/TL-ARCHERC7V2 (contents, props changed) head/sys/mips/conf/TL-ARCHERC7V2.hints (contents, props changed) Added: head/sys/mips/conf/TL-ARCHERC7V2 ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/conf/TL-ARCHERC7V2 Fri Jul 3 06:09:56 2015 (r285079) @@ -0,0 +1,68 @@ +# +# TP-Link Archer C7 - based on the AP135 reference design. +# +# This contains a QCA9558 MIPS74k SoC with on-board 3x3 2GHz wifi, +# 128MiB RAM, an AR8327 5-port gigabit ethernet switch and +# a QCA 11ac 5GHz AP NIC. +# +# The to things not currently support are the QCA 11ac NIC and +# PCIe host controllers - there's two of them, and the existing +# PCIe code here doesn't support that just yet. +# +# $FreeBSD$ +# + +# Include the default QCA955x parameters +include "QCA955X_BASE" + +ident TL-ARCHERC7V2 + +# Override hints with board values +hints "TL-ARCHERC7V2.hints" + +# Force the board memory - this has 128MiB RAM +options AR71XX_REALMEM=(128*1024*1024) + +# i2c GPIO bus +#device gpioiic +#device iicbb +#device iicbus +#device iic + +# Options required for miiproxy and mdiobus +options ARGE_MDIO # Export an MDIO bus separate from arge +device miiproxy # MDIO bus <-> MII PHY rendezvous + +device etherswitch +device arswitch + +# read MSDOS formatted disks - USB +options MSDOSFS + +# Enable the uboot environment stuff rather then the +# redboot stuff. +options AR71XX_ENV_UBOOT + +# uzip - to boot natively from flash +device geom_uncompress +options GEOM_UNCOMPRESS + +# Used for the static uboot partition map +device geom_map + +# yes, this board has a PCIe connected atheros device +# add ath_pci so it can at least attach things when there's a +# ath(4) in there, rather than the 11ac chip we don't support. +device pci +device qca955x_pci + +device ath_pci +options AR71XX_ATH_EEPROM +device firmware # Used by the above +options ATH_EEPROM_FIRMWARE + +# Boot off of the rootfs, as defined in the geom_map setup. +options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\" + +# Default to accept +options IPFIREWALL_DEFAULT_TO_ACCEPT Added: head/sys/mips/conf/TL-ARCHERC7V2.hints ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/conf/TL-ARCHERC7V2.hints Fri Jul 3 06:09:56 2015 (r285079) @@ -0,0 +1,201 @@ +# The Archer C7 v2 is based on the AP135-020 board, with +# TP-Link specific bits (eg flash layout, MAC address, etc.) + +# $FreeBSD$ + +# QCA955X_ETH_CFG_RGMII_EN (1 << 0) +hint.qca955x_gmac.0.gmac_cfg=0x1 + +# Use base mac address for wifi; +1 and +2 for arge0/arge1. +hint.ar71xx.0.eeprom_mac_addr=0x1f01fc00 +hint.ar71xx.0.eeprom_mac_isascii=0 + +hint.ar71xx_mac_map.0.devid=ath +hint.ar71xx_mac_map.0.unitid=0 +hint.ar71xx_mac_map.0.offset=0 +hint.ar71xx_mac_map.0.is_local=0 + +hint.ar71xx_mac_map.1.devid=arge +hint.ar71xx_mac_map.1.unitid=0 +hint.ar71xx_mac_map.1.offset=1 +hint.ar71xx_mac_map.1.is_local=0 + +hint.ar71xx_mac_map.2.devid=arge +hint.ar71xx_mac_map.2.unitid=1 +hint.ar71xx_mac_map.2.offset=2 +hint.ar71xx_mac_map.2.is_local=0 + +# mdiobus0 on arge0 +hint.argemdio.0.at="nexus0" +hint.argemdio.0.maddr=0x19000000 +hint.argemdio.0.msize=0x1000 +hint.argemdio.0.order=0 + +# mdiobus1 on arge1 - required to bring up arge1? +hint.argemdio.1.at="nexus0" +hint.argemdio.1.maddr=0x1a000000 +hint.argemdio.1.msize=0x1000 +hint.argemdio.1.order=0 + +# AR8327 - connected via mdiobus0 on arge0 +hint.arswitch.0.at="mdio0" +hint.arswitch.0.is_7240=0 # definitely not the internal switch! +hint.arswitch.0.is_9340=0 # not the internal switch! +hint.arswitch.0.numphys=5 # all ports are PHYs +hint.arswitch.0.phy4cpu=0 +hint.arswitch.0.is_rgmii=0 # not needed +hint.arswitch.0.is_gmii=0 # not needed + +# This is where it gets a bit odd. port 0 and port 6 are CPU ports. +# The current code only supports one CPU port. So hm, what should +# we do to hook PAD6 up to be RGMII but a PHY, not a MAC? + +# The other trick - how do we get arge1 (hooked up to GMAC0) to work? +# That's currently supposed to be hooked up to CPU port 0. + +# Other AR8327 configuration parameters + +# AP136-020 parameters + +# GMAC0 AR8327 -> GMAC1 (arge1) SoC, SGMII + +# AR8327_PAD_MAC_SGMII +hint.arswitch.0.pad.0.mode=3 +#hint.arswitch.0.pad.0.rxclk_delay_sel=0 +hint.arswitch.0.pad.0.sgmii_delay_en=1 + +# GMAC6 AR8327 -> GMAC0 (arge0) SoC, RGMII + +# AR8327_PAD_MAC_RGMII +# XXX I think this hooks it up to the internal MAC6 +hint.arswitch.0.pad.6.mode=6 +hint.arswitch.0.pad.6.txclk_delay_en=1 +hint.arswitch.0.pad.6.rxclk_delay_en=1 +# AR8327_CLK_DELAY_SEL1 +hint.arswitch.0.pad.6.txclk_delay_sel=1 +# AR8327_CLK_DELAY_SEL2 +hint.arswitch.0.pad.6.rxclk_delay_sel=2 + +# XXX there's no LED management just yet! +hint.arswitch.0.led.ctrl0=0xc737c737 +hint.arswitch.0.led.ctrl1=0x00000000 +hint.arswitch.0.led.ctrl2=0x00000000 +hint.arswitch.0.led.ctrl3=0x00c30c00 +hint.arswitch.0.led.open_drain=0 + +# force_link=1 is required for the rest of the parameters +# to be configured. +hint.arswitch.0.port.0.force_link=1 +hint.arswitch.0.port.0.speed=1000 +hint.arswitch.0.port.0.duplex=1 +hint.arswitch.0.port.0.txpause=1 +hint.arswitch.0.port.0.rxpause=1 + +# force_link=1 is required for the rest of the parameters +# to be configured. +hint.arswitch.0.port.6.force_link=1 +hint.arswitch.0.port.6.speed=1000 +hint.arswitch.0.port.6.duplex=1 +hint.arswitch.0.port.6.txpause=1 +hint.arswitch.0.port.6.rxpause=1 + +# arge0 - hooked up to AR8327 GMAC6, RGMII +# set at 1000/full to the switch. +# so, lock both sides of this connect up to 1000/full; +# if_arge thus wont change the PLL configuration +# upon a link status change. +hint.arge.0.phymask=0x0 +hint.arge.0.miimode=3 # RGMII +hint.arge.0.media=1000 +hint.arge.0.fduplex=1 +hint.arge.0.pll_1000=0x56000000 + +# MAC for arge0 is the first 6 bytes of the ART +hint.arge.0.eeprommac=0x1fff0000 + +# arge1 - lock up to 1000/full +hint.arge.1.phymask=0x0 +hint.arge.1.media=1000 +hint.arge.1.fduplex=1 +hint.arge.1.miimode=5 # SGMII +hint.arge.1.pll_1000=0x03000101 + +# MAC for arge1 is the second 6 bytes of the ART +hint.arge.1.eeprommac=0x1fff0006 + +# ath0: Where the ART is - last 64k in the flash +hint.ath.0.eepromaddr=0x1fff0000 +hint.ath.0.eepromsize=16384 + +# ath1: it's different; it's a PCIe attached device, so +# we instead need to teach the PCIe bridge code about it +# (ie, the 'early pci fixup' stuff that programs the PCIe +# host registers on the NIC) and then we teach ath where +# to find it. + +# ath1 hint - pcie slot 0 +# hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff4000 +# hint.pcib.0.bus.0.0.0.ath_fixup_size=16384 + +# ath0 - eeprom comes from here +# hint.ath.1.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware" + +# Flash layout - the tplink layout differs to what's passed +# in via the kernel environment. What's passed in is based on +# the AP135, but.. well, TP-Link. + +# 128 KiB u-boot +hint.map.0.at="flash/spi0" +hint.map.0.start=0x00000000 +hint.map.0.end=0x00020000 # 128k u-boot +hint.map.0.name="u-boot" +hint.map.0.readonly=1 + +# Kernel +hint.map.1.at="flash/spi0" +hint.map.1.start=0x00020000 +hint.map.1.end="search:0x00020000:0x10000:.!/bin/sh" +hint.map.1.name="kernel" +hint.map.1.readonly=1 + +# Root +hint.map.2.at="flash/spi0" +hint.map.2.start="search:0x00020000:0x10000:.!/bin/sh" +hint.map.2.end=0x007d0000 +hint.map.2.name="rootfs" +hint.map.2.readonly=1 + +# 64KiB cfg +hint.map.4.at="flash/spi0" +hint.map.4.start=0x00fe0000 +hint.map.4.end=0x00ff0000 +hint.map.4.name="cfg" +hint.map.4.readonly=0 + +# 64KiB ART +hint.map.6.at="flash/spi0" +hint.map.6.start=0x00ff0000 +hint.map.6.end=0x01000000 # 64k ART +hint.map.6.name="ART" +hint.map.6.readonly=1 + +# TODO: GPIO config +# These are the GPIO LEDs and buttons which can be software controlled. +hint.gpio.0.pinmask=0x00600000 + +# Enable GPIO21, GPIO22 output and high - for USB power +hint.gpio.0.pinon=0x00600000 + +# TODO: GPIO pin config: +# LED_WLAN2G 12 +# BTN_RFKILL 13 +# LED_SYSTEM 14 +# LED_QSS 15 +# BTN_RESET 16 +# LED_WLAN5G 17 +# LED_USB1 18 +# LED_USB2 19 +# USB2_POWER 21 +# USB1_POWER 22 + +# TODO: PCIe isn't showing link; maybe uboot isn't initialising