From owner-freebsd-questions  Mon Oct  9 12:53:07 1995
Return-Path: owner-questions
Received: (from root@localhost)
          by freefall.freebsd.org (8.6.12/8.6.6) id MAA20322
          for questions-outgoing; Mon, 9 Oct 1995 12:53:07 -0700
Received: from silicon.csci.csusb.edu (silicon.csci.csusb.edu [139.182.38.1])
          by freefall.freebsd.org (8.6.12/8.6.6) with SMTP id MAA20312
          for <questions@freebsd.org>; Mon, 9 Oct 1995 12:53:02 -0700
Received: from blaze.csci.csusb.edu by silicon.csci.csusb.edu (5.0/SMI-SVR4)
	id AA25753; Mon, 9 Oct 1995 13:01:49 +0800
Received: by blaze.csci.csusb.edu (AIX 3.2/UCB 5.64/4.03)
          id AA12021; Mon, 9 Oct 1995 12:39:02 -0700
From: nwestfal@blaze.csci.csusb.edu (Neal Westfall)
Message-Id: <9510091939.AA12021@blaze.csci.csusb.edu>
Subject: IDE probed but cannot mount
To: questions@freebsd.org
Date: Mon, 9 Oct 1995 12:39:01 -0700 (PDT)
X-Mailer: ELM [version 2.4 PL23]
Content-Type: text
Content-Length: 945       
Sender: owner-questions@freebsd.org
Precedence: bulk

I have a Toshiba XM-5302B IDE cdrom drive attached to a Promise
2300Plus controller configured as slave (master is WD 1.2GB HD).
I am running on 1005-SNAP, with a new kernel with the atapi
support for IDE cdroms compiled in.  The kernel successfully
probes the cdrom drive on bootup, but I cannot mount the drive:

darkside# mount -t cd9660 /dev/wcd0c /cdrom 
cd9660: /dev/wcd0c: Device not configured
darkside# 

Is this the proper procedure?  That's the way I used to mount
my old mitsumi single speed drive (/dev/mcd0a).

Here is output from dmesg:

wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC31200F>
wd0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <TOSHIBA CD-ROM XM-5302TA/1095>, removable, intr, iordy
wcd0: 689Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm data disc loaded, unlocked

Any help appreciated.

Neal Westfall
nwestfal@csci.csusb.edu