Date: Tue, 14 Sep 1999 20:50:34 -0400 From: Colin <crw@the-pentagon.com> To: freebsd-questions@freebsd.org Subject: user ppp and my isp Message-ID: <37DEED5A.64C633B@the-pentagon.com>
next in thread | raw e-mail | index | archive | help
I've been having no luck at all getting my BSD to connect to my
isp. I'm running release 3.0 (I will probably upgrade eventually, I
just haven't really had to yet ;)) The login information is fine and
the modem dials without difficulty. After connecting, the userid and
password are sent then about 3 seconds later the connection is dropped
(I suspect from the other end, as when I dial manually using term, after
the login I see "NO CARRIER"). Before I call my ISP and ask them what's
up with their end, I want to make sure it's not my end. The important
files are as follows:
/etc/ppp.conf
#
default:
set log Phase Chat LCP IPCP CCP tun command
set device /dev/cuaa1
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 30 \"\" AT OK-AT-OK
ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
#
attcanada:
set phone XXXXXXX
set login "TIMEOUT 10 ogin:--ogin: XXXX@attcanada.net word: XXXXXX "
set timeout 300
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
enable dns
/etc/host.conf
# $Id: host.conf,v 1.4 1997/02/23 09:20:40 peter Exp $
# Default is to use the nameserver first
#bind
# If that doesn't work, then try the /etc/hosts file
#hosts
# If you have YP/NIS configured, uncomment the next line
# nis
#This defaults to the wrong order...;)
hosts
bind
/etc/hosts
127.0.0.1 localhost.net localhost
192.168.0.1 arthur.net arthur
192.168.0.10 tristan.net tristan
/etc/resolv.conf
nameserver 206.191.82.225
nameserver 206.191.83.225
/var/log/pp.log
Sep 12 14:23:48 arthur ppp[22775]: tun0: Command: /dev/tty: dial
attcanada
Sep 12 14:23:48 arthur ppp[22775]: tun0: Command: attcanada: set phone
XXXXXXX
Sep 12 14:23:48 arthur ppp[22775]: tun0: Command: attcanada: set login
TIMEOUT 10 ogin:--ogin: XXX@attcanada.net word: XXXXXX
Sep 12 14:23:48 arthur ppp[22775]: tun0: Command: attcanada: set timeout
300
Sep 12 14:23:48 arthur ppp[22775]: tun0: Command: attcanada: set ifaddr
10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Sep 12 14:23:48 arthur ppp[22775]: tun0: Command: attcanada: add default
HISADDR
Sep 12 14:23:48 arthur ppp[22775]: tun0: Command: attcanada: enable dns
Sep 12 14:23:48 arthur ppp[22775]: tun0: Phase: bundle: Establish
Sep 12 14:23:48 arthur ppp[22775]: tun0: Phase: deflink: closed ->
opening
Sep 12 14:23:49 arthur ppp[22775]: tun0: Phase: deflink: Connected!
Sep 12 14:23:49 arthur ppp[22775]: tun0: Phase: deflink: opening -> dial
Sep 12 14:23:49 arthur ppp[22775]: tun0: Phase: Phone: XXXXXXX
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: deflink: Dial attempt 1
of 1
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Send: AT^M
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Expect(30): OK
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Received: AT^M^M
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Received: OK^M
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Send: ATE1Q0^M
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Expect(30): OK
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Received: ATE1Q0^M^M
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Received: OK^M
Sep 12 14:23:49 arthur ppp[22775]: tun0: Chat: Send: ATDTXXXXXXX^M
Sep 12 14:23:51 arthur ppp[22775]: tun0: Chat: Expect(40): CONNECT
Sep 12 14:24:04 arthur ppp[22775]: tun0: Chat: Received: ATDTXXXXXXX^M^M
Sep 12 14:24:04 arthur ppp[22775]: tun0: Chat: Received: CONNECT
Sep 12 14:24:04 arthur ppp[22775]: tun0: Phase: deflink: dial -> login
Sep 12 14:24:04 arthur ppp[22775]: tun0: Chat: Expect(10): ogin:
Sep 12 14:24:04 arthur ppp[22775]: tun0: Chat: Received: 115200^M
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Received: ^M
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Received: Welcome to 3Com
Total Control HiPer ARC (TM)^M
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Received: Networks That
Go The Distance (TM)^M
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Received: ^M
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Received: login:
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Send: XXX@attcanada.net^M
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Expect(10): word:
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Received:
XXX@attcanada.net^M
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Received: Password:
Sep 12 14:24:05 arthur ppp[22775]: tun0: Chat: Send: XXXXXX^M
Sep 12 14:24:05 arthur ppp[22775]: tun0: Phase: deflink: login -> lcp
Sep 12 14:24:05 arthur ppp[22775]: tun0: LCP: FSM: Using "deflink" as a
transport
Sep 12 14:24:05 arthur ppp[22775]: tun0: LCP: deflink: State change
Initial --> Closed
Sep 12 14:24:05 arthur ppp[22775]: tun0: LCP: deflink: State change
Closed --> Stopped
Sep 12 14:24:06 arthur ppp[22775]: tun0: LCP: deflink: LayerStart
Sep 12 14:24:06 arthur ppp[22775]: tun0: LCP: deflink: SendConfigReq(1)
state = Stopped
Sep 12 14:24:06 arthur ppp[22775]: tun0: LCP: ACFCOMP[2]
Sep 12 14:24:06 arthur ppp[22775]: tun0: LCP: PROTOCOMP[2]
Sep 12 14:24:06 arthur ppp[22775]: tun0: LCP: ACCMAP[6] 0x00000000
Sep 12 14:24:06 arthur ppp[22775]: tun0: LCP: MRU[4] 1500
Sep 12 14:24:06 arthur ppp[22775]: tun0: LCP: MAGICNUM[6] 0x56e95db4
Sep 12 14:24:06 arthur ppp[22775]: tun0: LCP: deflink: State change
Stopped --> Req-Sent
Sep 12 14:24:07 arthur ppp[22775]: tun0: Phase: deflink: Carrier lost
Sep 12 14:24:07 arthur ppp[22775]: tun0: LCP: deflink: State change
Req-Sent --> Starting
Sep 12 14:24:07 arthur ppp[22775]: tun0: LCP: deflink: LayerFinish
Sep 12 14:24:07 arthur ppp[22775]: tun0: LCP: deflink: State change
Starting --> Initial
Sep 12 14:24:07 arthur ppp[22775]: tun0: Phase: deflink: Disconnected!
Sep 12 14:24:07 arthur ppp[22775]: tun0: Phase: deflink: lcp -> hangup
Sep 12 14:24:07 arthur ppp[22775]: tun0: Phase: deflink: Connect time:
18 secs: 2 octets in, 52 octets out
Sep 12 14:24:07 arthur ppp[22775]: tun0: Phase: total 3 bytes/sec, peak
10 bytes/sec on Sun Sep 12 14:24:07 1999
Sep 12 14:24:07 arthur ppp[22775]: tun0: Phase: deflink: hangup ->
closed
Sep 12 14:24:07 arthur ppp[22775]: tun0: Phase: bundle: Dead
Sep 12 14:24:26 arthur ppp[22775]: tun0: Command: /dev/tty: q
I am also running a local network, 192.168.0.X over ethernet, but I
don't start routed or named (only 3 computers, these guys aren't needed
;))
I've been through every bit of documentation on this I could find
and I've tried a few things like deny lqr, deny pred1, using the same
init string for my modem as Win95 (which is how I'm connected now) and
I've run out of ideas.
Any ideas or help will be greatly appreciated.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37DEED5A.64C633B>