Date: Mon, 16 Feb 2004 12:15:33 +0100 From: "Remko Lodder" <remko@elvandar.org> To: "Ganbold" <ganbold@micom.mng.net> Cc: freebsd-hackers@freebsd.org Subject: RE: [Freebsd-hackers] Re: Intel PRO/1000 MT onboard network cardproblem in FreeBSD 5.2-current Message-ID: <20040216111455.0C15F2B4D6C@mail.evilcoder.org> In-Reply-To: <20040216111135.ABD2518@mail.elvandar.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Alright, the module is already compiled into the kernel, or the driver is already loaded. Strange, because i yesterday build in the same nic on my machine. <snip> uname -a FreeBSD luca.elvandar.org 5.2.1-RC2 FreeBSD 5.2.1-RC2 #2: Sun Feb 15 19:44:28 CET 2004 root@luca.elvandar.org:/usr/freebsd52/src/sys/i386/compile/ELVANDAR i386 </snip> <snip> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xa000-0xa03f mem 0xde000000-0xde01ffff,0xde800000-0xde81ffff irq 12 at device 10.0 on pci0 em0: Speed:N/A Duplex:N/A </snip> Could it be a bios setting (note that i am guessing now) ?, onboard nic enabled.. Cheers -- Kind regards, Remko Lodder Elvandar.org/DSINet.org www.mostly-harmless.nl Dutch community for helping newcomers on the hackerscene mrtg.grunn.org Dutch mirror of MRTG -----Oorspronkelijk bericht----- Van: Ganbold [mailto:ganbold@micom.mng.net] Verzonden: maandag 16 februari 2004 12:16 Aan: Remko Lodder CC: freebsd-hackers@freebsd.org Onderwerp: RE: [Freebsd-hackers] Re: Intel PRO/1000 MT onboard network cardproblem in FreeBSD 5.2-current When I try to load if_em.ko module /var/log/messages says: Feb 16 19:08:41 mnao1 kernel: module_register: module pci/em already exists! Feb 16 19:08:41 mnao1 kernel: Module pci/em failed to register: 17 Ganbold At 07:07 PM 16.02.2004, you wrote: >What happends when you load the module if_em.ko > >kldload if_em.ko > >Cheers, > >-- > >Kind regards, > >Remko Lodder >Elvandar.org/DSINet.org >www.mostly-harmless.nl Dutch community for helping newcomers on the >hackerscene > >mrtg.grunn.org Dutch mirror of MRTG > >-----Oorspronkelijk bericht----- >Van: freebsd-hackers-bounces@lists.elvandar.org >[mailto:freebsd-hackers-bounces@lists.elvandar.org]Namens Steven >Hartland >Verzonden: maandag 16 februari 2004 11:54 >Aan: Mike Silbersack; Ganbold >CC: freebsd-hackers@freebsd.org >Onderwerp: [Freebsd-hackers] Re: Intel PRO/1000 MT onboard network >cardproblem in FreeBSD 5.2-current > > >Not wishing to point out the obvious but there's no EM controller there? > Steve >----- Original Message ----- >From: "Ganbold" <ganbold@micom.mng.net> >To: "Mike Silbersack" <silby@silby.com> >Cc: <freebsd-hackers@freebsd.org> >Sent: Monday, February 16, 2004 10:45 AM >Subject: Re: Intel PRO/1000 MT onboard network card problem in FreeBSD >5.2-current > > > > Hi, > > > > Following is the output of pciconf -lv command: > > > > hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00171166 > > rev=0x32 hdr=0x00 > > vendor = 'ServerWorks (Was: Reliance Computer Corp)' > > device = 'CMIC-SL' > > class = bridge > > subclass = HOST-PCI > > hostb1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00171166 > > rev=0x00 hdr=0x00 > > vendor = 'ServerWorks (Was: Reliance Computer Corp)' > > device = 'CMIC-SL' > > class = bridge > > subclass = HOST-PCI > > rl0@pci0:4:0: class=0x020000 card=0x9207103c chip=0x12111113 rev=0x10 > > hdr=0x00 > > vendor = 'Accton Technology Corporation' > > device = 'EN-1207D Fast Ethernet Adapter' > > class = network > > subclass = ethernet > > none0@pci0:14:0: class=0x030000 card=0x01351028 chip=0x47521002 > > rev=0x27 hdr=0x00 > > vendor = 'ATI Technologies' > > device = 'Rage XL PCI' > > class = display > > subclass = VGA > > hostb2@pci0:15:0: class=0x060000 card=0x02011166 chip=0x02011166 > > rev=0x93 hdr=0x00 > > vendor = 'ServerWorks (Was: Reliance Computer Corp)' > > device = 'CSB5 PCI to ISA Bridge' > > class = bridge > > subclass = HOST-PCI > > atapci0@pci0:15:1: class=0x01018a card=0xc1351028 chip=0x02121166 > > rev=0x93 hdr=0x00 > > vendor = 'ServerWorks (Was: Reliance Computer Corp)' > > device = 'CSB5 PCI EIDE Controller' > > class = mass storage > > subclass = ATA > > ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 > > rev=0x05 hdr=0x00 > > vendor = 'ServerWorks (Was: Reliance Computer Corp)' > > device = 'OSB4 OpenHCI Compliant USB Controller' > > class = serial bus > > subclass = USB > > isab0@pci0:15:3: class=0x060100 card=0x02301166 chip=0x02251166 > > rev=0x00 hdr=0x00 > > vendor = 'ServerWorks (Was: Reliance Computer Corp)' > > device = 'CSB5 PCI Bridge' > > class = bridge > > subclass = PCI-ISA > > hostb3@pci0:16:0: class=0x060000 card=0x00000000 chip=0x01011166 > > rev=0x05 hdr=0x00 > > vendor = 'ServerWorks (Was: Reliance Computer Corp)' > > device = 'CIOB-X2' > > class = bridge > > subclass = HOST-PCI > > hostb4@pci0:16:2: class=0x060000 card=0x00000000 chip=0x01011166 > > rev=0x05 hdr=0x00 > > vendor = 'ServerWorks (Was: Reliance Computer Corp)' > > device = 'CIOB-X2' > > class = bridge > > subclass = HOST-PCI > > mpt0@pci1:4:0: class=0x010000 card=0x01351028 chip=0x00301000 rev=0x07 > > hdr=0x00 > > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > > device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller' > > class = mass storage > > subclass = SCSI > >================================================ >This e.mail is private and confidential between Multiplay (UK) Ltd. and the >person or entity to whom it is addressed. In the event of misdirection, the >recipient is prohibited from using, copying, printing or otherwise >disseminating it or any information contained in it. > >In the event of misdirection, illegible or incomplete transmission please >telephone (023) 8024 3137 >or return the E.mail to postmaster@multiplay.co.uk. > > >_______________________________________________ >freebsd-hackers@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" >_______________________________________________ >Freebsd-hackers mailing list >Freebsd-hackers@lists.elvandar.org >http://lists.elvandar.org/mailman/listinfo/freebsd-hackers
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040216111455.0C15F2B4D6C>