From owner-freebsd-questions  Tue Dec 12  7:59:44 2000
From owner-freebsd-questions@FreeBSD.ORG  Tue Dec 12 07:59:41 2000
Return-Path: <owner-freebsd-questions@FreeBSD.ORG>
Delivered-To: freebsd-questions@freebsd.org
Received: from mail.wlcg.com (mail.wlcg.com [207.226.17.4])
	by hub.freebsd.org (Postfix) with ESMTP id 1935E37B400
	for <freebsd-questions@FreeBSD.ORG>; Tue, 12 Dec 2000 07:59:41 -0800 (PST)
Received: from localhost (rsimmons@localhost)
	by mail.wlcg.com (8.11.0/8.11.0) with ESMTP id eBCFwZb66636;
	Tue, 12 Dec 2000 10:58:35 -0500 (EST)
	(envelope-from rsimmons@wlcg.com)
Date: Tue, 12 Dec 2000 10:58:35 -0500 (EST)
From: Rob Simmons <rsimmons@wlcg.com>
To: Ken Seggerman <suleyman@echonyc.com>
Cc: freebsd-questions@FreeBSD.ORG
Subject: Re: netatalk running but nothing in chooser
In-Reply-To: <Pine.GSO.4.21.0012120643070.8112-100000@echonyc.com>
Message-ID: <Pine.BSF.4.21.0012121057090.65394-100000@mail.wlcg.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-questions@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

Did you rebuild your kernel with netatalk, or are you loading it as a
module?  I have found that compiling it in statically works the
best.  Check the /usr/src/sys/i386/conf/LINT file for the line to add to
your kernel file.

Robert Simmons
Systems Administrator
http://www.wlcg.com/

On Tue, 12 Dec 2000, Ken Seggerman wrote:

> Greetings:
> 
> I am running netatalk-1.4b2+asun2.1.3 on FreeBSD 4.1-RC.
> atalkd and afpd seem to be running ok, but nothing shows up
> in the chooser of the mac I have connected to my LAN.
> 
> Nothing shows up when I go to the AppleTalk control panel, and when I try
> to open Network Browser, it hangs and I have to reboot the mac.
> 
> I have been to all of the netatalk sites, but still have no idea what to
> do.
> 
> My atalkd.conf file reads as follows:
> 
> xl0 -phase 2 -net 0-65534 -addr 65280.13
> 
> adding a named zone ( -zone "myZone") doesn't help
> 
> my /usr/local/etc/AppleVolumes.system file looks ok.
> 
> my /etc/services file seems to have everything required by netatalk.
> 
> my xl0 interface seems ok:
> 
> xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet 10.0.0.4 netmask 0xffffff00 broadcast 10.0.0.255
>         inet6 fe80::250:daff:fe1a:e000%xl0 prefixlen 64 scopeid 0x1 
>         atalk 65280.13 range 0-65534 phase 2 broadcast 0.255
>         ether 00:50:da:1a:e0:00 
>         media: autoselect (100baseTX <full-duplex>) status: active
>         supported media: autoselect 100baseTX <full-duplex> 100baseTX
> 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
> 
> Any help would be very welcome.
> 
> thanks,
> 
> ken_seggerman@suleyman.com
> 
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message