Date: Tue, 19 Apr 2005 10:18:59 -0400 From: "M. Parsons" <mrparsons@gmail.com> To: freebsd-questions@freebsd.org Subject: error with cvsup/ezm3-1.2 ? Message-ID: <42651353.3060106@gmail.com>
next in thread | raw e-mail | index | archive | help
Trying to install cvsup via ports, I cd into /usr/ports/net/cvsup and it
wants to install ezm3, which is fine, but during the ezm3 install, this
happens:
Any ideas on how to fix it?
missing version stamps -> compiling ../src/C/FreeBSD4/Csignal.i3
missing version stamps -> compiling ../src/C/FreeBSD4/Cstring.i3
missing version stamps -> compiling ../src/C/FreeBSD4/Cstdio.i3
new source -> compiling ../src/float/IEEE/Real.i3
***
*** runtime error:
*** Segmentation violation - possible attempt to dereference NIL
*** pc = 0x8157d8c
***
use option @M3stackdump to get a stack trace
m3build: quake error: quake error: runtime error: m3build failed with
error code: 34304
--procedure-- -line- -file---
error -- <builtin>
BuildChunk 164 /usr/ports/lang/ezm3/work/ezm3-1.2/src/m3makefile
PkgInfo 240 /usr/ports/lang/ezm3/work/ezm3-1.2/src/m3makefile
38 /usr/ports/lang/ezm3/work/ezm3-1.2/src/PACKAGES
gmake: *** [packages] Error 1
*** Error code 2
Stop in /usr/ports/lang/ezm3.
*** Error code 1
Stop in /usr/ports/net/cvsup.
attached is also my dmesg if anyone wants a look at it? (bad paste job
as well)
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Sun Apr 17 09:22:09 EDT 2005
daman@freebsd.sympatico.ca:/usr/src/sys/i386/compile/POLLINGSMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (333.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x650 Stepping = 0
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (256 MB)
avail memory = 253046784 (241 MB)
MPTable: <INTEL 440LX >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem
0xf0000000-0xf7ffffff at de
vice 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3
f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
piix0: <PIIX Timecounter> port 0xfcb0-0xfcbf at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xef40-0xef5f irq 11 at
device 12.
0 on pci0
ed0: [GIANT-LOCKED]
ed0: Ethernet address: 00:80:c8:dd:2d:a2
ed0: if_start running deferred for Giant
type NE2000 (16 bit)
de0: <Digital 21140A Fast Ethernet> port 0xec80-0xecff mem
0xfebfff80-0xfebfffff
irq 10 at device 13.0 on pci0
de0: [GIANT-LOCKED]
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de0: Ethernet address: 00:e0:29:00:df:0d
de0: if_start running deferred for Giant
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ep0: <3Com 3C509-TPO EtherLink III> at port 0x350-0x35f irq 5 on isa0
ep0: Ethernet address: 00:50:04:a3:35:62
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 1.000 msec
ad0: 3093MB <FUJITSU MPB3032ATU E/4010> [6704/15/63] at ata0-master UDMA33
ad2: 4125MB <FUJITSU MPC3043AT/6018> [8940/15/63] at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
de0: enabling Full Duplex 100baseTX port
IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled
de0: enabling 100baseTX port
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42651353.3060106>