Date: Tue, 24 Oct 2000 06:34:36 GMT From: "Paul A. Hoadley" <paulh@chariot.net.au> To: freebsd-questions@freebsd.org Cc: "William Wong" <willwong@anime.ca> Subject: Re: PPPoE on 3.4 Message-ID: <39f52d7c.64a4.0@chariot.net.au>
next in thread | raw e-mail | index | archive | help
>The handbook fails to mention that you must bring up the >interface for the pppoe device. It's possible that this is >what's causing the problem. Thanks, Will, that's certainly brought me a step closer -- I had brought the NIC up, but your post pushed me to take a closer look -- I had mismatching MTUs in my ifconfig and ppp.conf -- the machine seems to be talking to the modem now, but it's still failing. This time I will paste in part of ppp.log: ----- [*many* apologies for what will no doubt be AWFUL formatting of this log file -- I'm having to use my ISP's dreadful webmail interface while my main machine is down...] Oct 24 15:49:28 grover ppp[522]: Phase: Using interface: tun0 Oct 24 15:49:28 grover ppp[522]: Phase: deflink: Created in closed state Oct 24 15:49:28 grover ppp[522]: tun0: Command: default: nat enable yes Oct 24 15:49:28 grover ppp[522]: tun0: Command: default: nat same_ports yes Oct 24 15:49:28 grover ppp[522]: tun0: Command: default: nat use_sockets yes Oct 24 15:49:28 grover ppp[522]: tun0: Command: default: set redial 15 28800 Oct 24 15:49:28 grover ppp[522]: tun0: Command: default: set reconnect 15 28800 Oct 24 15:49:28 grover ppp[523]: tun0: Phase: PPP Started (background mode). Oct 24 15:49:28 grover ppp[523]: tun0: Phase: bundle: Establish Oct 24 15:49:28 grover ppp[523]: tun0: Phase: deflink: closed -> opening Oct 24 15:49:28 grover ppp[523]: tun0: Phase: deflink: Connected! Oct 24 15:49:28 grover ppp[523]: tun0: Phase: deflink: opening -> dial Oct 24 15:49:28 grover ppp[523]: tun0: Chat: deflink: Dial attempt 1 of 28800 Oct 24 15:49:28 grover ppp[523]: tun0: Phase: deflink: dial -> carrier Oct 24 15:49:29 grover ppp[523]: tun0: Phase: deflink: /dev/cuaa1 doesn't support CD Oct 24 15:49:29 grover ppp[523]: tun0: Phase: deflink: carrier -> login Oct 24 15:49:29 grover ppp[523]: tun0: Phase: deflink: login -> lcp Oct 24 15:49:29 grover ppp[523]: tun0: LCP: FSM: Using "deflink" as a transport Oct 24 15:49:29 grover ppp[523]: tun0: LCP: deflink: State change Initial --> Closed Oct 24 15:49:29 grover ppp[523]: tun0: LCP: deflink: State change Closed --> Stopped Oct 24 15:49:30 grover ppp[523]: tun0: LCP: deflink: LayerStart Oct 24 15:49:30 grover ppp[523]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped Oct 24 15:49:30 grover ppp[523]: tun0: LCP: ACFCOMP[2] Oct 24 15:49:30 grover ppp[523]: tun0: LCP: PROTOCOMP[2] Oct 24 15:49:30 grover ppp[523]: tun0: LCP: ACCMAP[6] 0x00000000 Oct 24 15:49:30 grover ppp[523]: tun0: LCP: MRU[4] 1500 Oct 24 15:49:30 grover ppp[523]: tun0: LCP: MAGICNUM[6] 0x6fb7b439 Oct 24 15:49:30 grover ppp[523]: tun0: LCP: deflink: State change Stopped --> Req-Sent Oct 24 15:49:33 grover ppp[523]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent Oct 24 15:49:33 grover ppp[523]: tun0: LCP: ACFCOMP[2] Oct 24 15:49:33 grover ppp[523]: tun0: LCP: PROTOCOMP[2] Oct 24 15:49:33 grover ppp[523]: tun0: LCP: ACCMAP[6] 0x00000000 Oct 24 15:49:33 grover ppp[523]: tun0: LCP: MRU[4] 1500 Oct 24 15:49:33 grover ppp[523]: tun0: LCP: MAGICNUM[6] 0x6fb7b439 Oct 24 15:49:36 grover ppp[523]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent Oct 24 15:49:36 grover ppp[523]: tun0: LCP: ACFCOMP[2] Oct 24 15:49:36 grover ppp[523]: tun0: LCP: PROTOCOMP[2] Oct 24 15:49:36 grover ppp[523]: tun0: LCP: ACCMAP[6] 0x00000000 Oct 24 15:49:36 grover ppp[523]: tun0: LCP: MRU[4] 1500 Oct 24 15:49:36 grover ppp[523]: tun0: LCP: MAGICNUM[6] 0x6fb7b439 Oct 24 15:49:39 grover ppp[523]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent Oct 24 15:49:39 grover ppp[523]: tun0: LCP: ACFCOMP[2] Oct 24 15:49:39 grover ppp[523]: tun0: LCP: PROTOCOMP[2] Oct 24 15:49:39 grover ppp[523]: tun0: LCP: ACCMAP[6] 0x00000000 Oct 24 15:49:39 grover ppp[523]: tun0: LCP: MRU[4] 1500 Oct 24 15:49:39 grover ppp[523]: tun0: LCP: MAGICNUM[6] 0x6fb7b439 Oct 24 15:49:42 grover ppp[523]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent Oct 24 15:49:42 grover ppp[523]: tun0: LCP: ACFCOMP[2] Oct 24 15:49:42 grover ppp[523]: tun0: LCP: PROTOCOMP[2] Oct 24 15:49:42 grover ppp[523]: tun0: LCP: ACCMAP[6] 0x00000000 Oct 24 15:49:42 grover ppp[523]: tun0: LCP: MRU[4] 1500 Oct 24 15:49:42 grover ppp[523]: tun0: LCP: MAGICNUM[6] 0x6fb7b439 Oct 24 15:49:45 grover ppp[523]: tun0: LCP: deflink: LayerFinish Oct 24 15:49:45 grover ppp[523]: tun0: LCP: deflink: State change Req-Sent --> Stopped Oct 24 15:49:45 grover ppp[523]: tun0: LCP: deflink: State change Stopped --> Closed Oct 24 15:49:45 grover ppp[523]: tun0: LCP: deflink: State change Closed --> Initial Oct 24 15:49:45 grover ppp[523]: tun0: Phase: deflink: Disconnected! Oct 24 15:49:45 grover ppp[523]: tun0: Phase: deflink: lcp -> logout Oct 24 15:49:45 grover ppp[523]: tun0: Phase: deflink: logout -> hangup Oct 24 15:49:45 grover ppp[523]: tun0: Phase: deflink: Disconnected! Oct 24 15:49:45 grover ppp[523]: tun0: Phase: deflink: Connect time: 17 secs: 0 octets in, 265 octets out Oct 24 15:49:45 grover ppp[523]: tun0: Phase: total 15 bytes/sec, peak 21 bytes/sec on Tue Oct 24 15:49:45 2000 Oct 24 15:49:45 grover ppp[523]: tun0: Phase: deflink: hangup -> opening Oct 24 15:49:45 grover ppp[523]: tun0: Phase: deflink: Enter pause (15) for redialing. Oct 24 15:50:00 grover ppp[523]: tun0: Phase: deflink: Redial timer expired. ----- So I take it my modem is talking to the other end, at least -- how far into the negotiation is it getting, and can anyone see why it's failing? Actually, I'll just tack on ppp.conf in case it helps: ----- # ppp.conf for grover # modified 01-08-99 # modified 24-10-00 for ADSL default: set log Phase Chat LCP IPCP CCP tun command nat enable yes nat same_ports yes nat use_sockets yes set redial 15 28800 set reconnect 15 28800 pppoe: set device PPPoE:rl0: set mru 1492 set mtu 1492 set speed sync enable lqr set lqrperiod 5 set cd 5 set dial set login set timeout 0 set authname xxxxx set authkey xxxxx set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns #end ----- I pulled this straight off the web -- so presumably it works for someone else! Thanks for any help anyone can provide. -- Paul. mailto:paulh@chariot.net.au mailto:paul.hoadley@student.adelaide.edu.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39f52d7c.64a4.0>