Date: Wed, 25 Aug 1999 00:08:04 -0700 (PDT) From: Doug <doemill@shocking.com> To: what? paintball? <bleh@school.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: sound on ensoniq audio pci Message-ID: <Pine.BSI.4.05.9908250007380.3235-100000@fingers.shocking.com> In-Reply-To: <37C37B95.676B6A9A@school.com>
next in thread | previous in thread | raw e-mail | index | archive | help
search the mail ardchives, there was a huge discusion on it about 3 weeks ago On Tue, 24 Aug 1999, what? paintball? wrote: > hey everyone. im trying to configure sound on my computer, and im not > really getting it. i have an ensoniq audio pci card. is there a place > that would give me some hints on how to go about getting this working? > im not sure if i should be compiling my kernel with snd0, or pcm0, or > what. any ideas on how i can get going on this? thanks. > > -scott > > below is an output of dmesg.. i dunno if there is anything in there that > i should be clueing into. > > > -(6)stock@muffin stock$ dmesg > Copyright (c) 1992-1999 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights > reserved. > FreeBSD 3.2-RELEASE #1: Mon Aug 23 13:19:10 PDT 1999 > root@muffin.fshcrkr.com:/usr/src/sys/compile/MUFFIN > Timecounter "i8254" frequency 1193182 Hz > CPU: Celeron (367.50-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x665 Stepping=5 > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, > PAT,PSE36,MMX,<b24>> > real memory = 134217728 (131072K bytes) > avail memory = 127250432 (124268K bytes) > Preloaded elf kernel "kernel" at 0xc032a000. > Probing for devices on PCI bus 0: > chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0 > chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0 > chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0 > ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 > chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3 > vga0: <VGA-compatible display device> rev 0x04 int a irq 9 on pci0.11.0 > pn0: <82c169 PNIC 10/100BaseTX> rev 0x21 int a irq 10 on pci0.15.0 > pn0: Ethernet address: 00:a0:cc:3f:13:86 > pn0: autoneg complete, link status good (half-duplex, 10Mbps) > Probing for devices on PCI bus 1: > Probing for PnP devices: > CSN 1 Vendor ID: USR2050 [0x50207256] Serial 0xd1acc983 Comp ID: @@@0000 > [0x00 > 000000] > Probing for devices on the ISA bus: > sc0 on isa > sc0: VGA color <16 virtual consoles, flags=0x0> > atkbdc0 at 0x60-0x6f on motherboard > atkbd0 irq 1 on isa > psm0 irq 12 on isa > psm0: model MouseMan+, device ID 0 > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > sio2 at 0x3e8-0x3ef irq 5 on isa > sio2: type 16550A > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): <WDC WD136AA> > wd0: 12971MB (26564832 sectors), 26354 cyls, 16 heads, 63 S/T, 512 B/S > wdc1 at 0x170-0x177 irq 15 on isa > wdc1: unit 0 (atapi): <FX240S/j01>, removable, intr, dma, iordis > acd0: drive speed 4134KB/sec, 256KB cache > acd0: supported read types: CD-R, CD-RW, CD-DA, packet track > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray > acd0: Medium: CD-ROM 120mm data/audio disc loaded, unlocked > wt0 not found at 0x300 > mcd0 not found at 0x300 > matcdc0 not found at 0x230 > scd0 not found at 0x230 > ppc0 at 0x378 irq 7 flags 0x40 on isa > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > lpt0: <generic printer> on ppbus 0 > lpt0: Interrupt-driven port > ppi0: <generic parallel i/o> on ppbus 0 > plip0: <PLIP network interface> on ppbus 0 > lpt0: <generic printer> on ppbus 0 > lpt0: Interrupt-driven port > adv0 not found at 0x330 > bt_isa_probe: Probe failled for card at 0x330 > bt_isa_probe: Probe failled for card at 0x334 > bt_isa_probe: Probe failled for card at 0x230 > bt_isa_probe: Probe failled for card at 0x234 > bt_isa_probe: Probe failled for card at 0x130 > bt_isa_probe: Probe failled for card at 0x134 > bt0 not found at 0x134 > aha0 not found at 0x134 > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > npx0 on motherboard > npx0: INT 16 interface > sscape0 not found at 0x330 > sscape_mss0 not found at 0x543 > changing root device to wd0s2a > pid 277 (ppp), uid 0: exited on signal 10 (core dumped) > cmd civctp pid 511 tried to use non-present sched_setscheduler > cmd civctp pid 512 tried to use non-present sched_setscheduler > cmd civctp pid 513 tried to use non-present sched_setscheduler > cmd civctp pid 523 tried to use non-present sched_setscheduler > cmd civctp pid 524 tried to use non-present sched_setscheduler > cmd civctp pid 525 tried to use non-present sched_setscheduler > cmd civctp pid 526 tried to use non-present sched_setscheduler > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > | Doug | unix9.org admin | shocking.com/~doemill/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.4.05.9908250007380.3235-100000>