Date: Wed, 03 Jan 2001 11:45:09 -0800 From: Dave Patterson <davep@dnai.com> To: questions@FreeBSD.org Subject: problems /w sound Message-ID: <3A538145.B57F61BD@dnai.com>
next in thread | raw e-mail | index | archive | help
Hello,
I'm haveing some problems getting sound to work on my machine. The
sound card I have is a Diamond Multimedia MX300 .
Here are my setting and errors:
------------------------------------------------------
from new kernel:
##########################
# For PnP sound cards
device pcm
##########################
# For non-pnp sound cards with no bridge drivers only:
#device pcm0 at isa? irq 10 drq 1 flags 0x0
#options PNPBIOS
#device pcm2
#device csa
***********************************************
From dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.2-STABLE #0: Wed Jan 3 09:04:42 PST 2001
root@rocsculptr:/usr/src/sys/compile/DAVE2
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 400909820 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134201344 (131056K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 127467520 (124480K bytes)
Preloaded elf kernel "kernel" at 0xc032a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc032a09c.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xdb800000-0xdb800fff irq 9 at device 2.0 on
pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x12eb, dev=0x0002) at 9.0 irq 5
dc0: <82c169 PNIC 10/100BaseTX> port 0xd000-0xd0ff mem
0xda800000-0xda8000ff irq 10 at device 10.0 o
n pci0
dc0: Ethernet address: 00:a0:cc:3f:ab:20
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <3Dfx Voodoo 3 graphics accelerator> at 11.0 irq 11
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xb400-0xb40f irq 0 at
device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
DUMMYNET initialized (000608)
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, l
ogging disabled
BRIDGE 990810, have 5 interfaces
-- index 1 type 6 phy 0 addrl 6 addr 00.a0.cc.3f.ab.20
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
ad0: 3020MB <WDC AC33100H> [6136/16/63] at ata0-master WDMA2
ata1-master: Aladdin: two atapi devices on this channel, no DMA
acd0: DVD-ROM <6x DVD-ROM> at ata1-master using PIO4
ata1-slave: Aladdin: two atapi devices on this channel, no DMA
acd1: CD-RW <Hewlett-Packard CD-Writer Plus 8200> at ata1-slave using
PIO4
Mounting root from ufs:/dev/ad0s1a
module_register: module netgraph already exists!
linker_file_sysinit "netgraph.ko" failed to register! 17
-------------------------------------
ALSO:
# cat /dev/sndstat
no device found. you need to configure.
--------------------------------------
Any help would be greatly appreciated
Thanks,
Dave Patterson
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A538145.B57F61BD>