Date: Mon, 10 Aug 2015 13:02:52 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 200993] camcontrol commands results in Periph destroyed on mrsas Message-ID: <bug-200993-8-zleXsCI8hI@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-200993-8@https.bugs.freebsd.org/bugzilla/> References: <bug-200993-8@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200993 Phil Kulin <phil@dip.host> changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|Overcome By Events |--- Status|Closed |Open --- Comment #7 from Phil Kulin <phil@dip.host> --- I am sorry, but I can not quickly produce the tests on production client's server. I have updated the firmware to the latest version for Dell PowerEdge 530. I have recompile the FreeBSD mrsas driver to the latest SVN revision. Problem still exists. (CYPRUS === GENERIC with RACCT enabled and mrsas from HEAD) # uname -a FreeBSD kf7.openstar.ru 10.1-RELEASE-p17 FreeBSD 10.1-RELEASE-p17 #3: Mon Aug 10 06:21:02 MSK 2015 root@**********:/usr/obj/usr/src/sys/CYPRUS amd64 # sysctl dev.mrsas dev.mrsas.%parent: dev.mrsas.0.%desc: AVAGO Invader SAS Controller dev.mrsas.0.%driver: mrsas dev.mrsas.0.%location: slot=0 function=0 dev.mrsas.0.%pnpinfo: vendor=0x1000 device=0x005d subvendor=0x1028 subdevice=0x1f49 class=0x010400 dev.mrsas.0.%parent: pci1 dev.mrsas.0.disable_ocr: 0 dev.mrsas.0.driver_version: 06.707.05.00-fbsd dev.mrsas.0.reset_count: 0 dev.mrsas.0.fw_outstanding: 0 dev.mrsas.0.io_cmds_highwater: 81 dev.mrsas.0.mrsas_debug: 4 dev.mrsas.0.mrsas_io_timeout: 180000 dev.mrsas.0.mrsas_fw_fault_check_delay: 1 dev.mrsas.0.reset_in_progress: 0 (Last 2 lines - problem) # MegaCli -AdpAllInfo -aAll 08/10/15 3:33:35: C0:EVT#03026-08/10/15 3:33:35: 44=Time established as 08/10/15 3:33:35; (19 seconds since power on) 08/10/15 3:33:51: C0:FlashFind: Searching for HIIM :Found @:0x80200000(App:any) 08/10/15 3:33:51: C0:FlashFind: Searching for HIIM :Found @:0x80200000(App:any) 08/10/15 3:33:51: C0:LOAD section: src=fc0401ce, size=37ecb, dst=0, mode=1...done 08/10/15 3:35:49: C0:MFI INIT: IOC Frame Received : timestamp=99 08/10/15 3:35:49: C0:SystemRequestFrameSize=40 ReplyDescriptorPostQueueDepth=740 ReplyFreeQueueDepth=0 08/10/15 3:35:49: C0:ReplyDescriptorPostQueueAddress=017903000 SystemRequestFrameBaseAddress=017733000 08/10/15 3:35:49: C0:Driver Version: 06.707.05.00-fbsd 08/10/15 3:35:49: C0:SRIOV is disabled, Combined Reply Q is enabled, setting maxQueues to 60 08/10/15 3:35:49: C0:MSI-X Enabled: MSIX offset = 0000e000 08/10/15 3:35:49: C0:MSIX[0]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[1]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[2]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[3]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[4]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[5]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[6]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[7]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[8]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[9]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[a]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[b]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[c]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[d]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[e]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:MSIX[f]: 00000000:00000000 - 0 08/10/15 3:35:49: C0:findMsiState: Setting MSI Mode to 2 (0=Legacy, 1=MSI, 2=MSI-X) 08/10/15 3:35:49: C0:MFI INIT 2: Changing FW state to Operational 08/10/15 3:35:49: C0:EVT#03027-08/10/15 3:35:49: 389=Host driver is loaded and operational 08/10/15 3:35:49: C0:initFreeDDBs=xorPool c0036400-c003fc00 genPool c0000000-c0010000 runTime 1 numXorDdb 40 numCipherDdb =200 08/10/15 3:35:49: C0:initBladeSGL c0010000-c0036400 runTime 1 numSglFrame 4c8 08/10/15 3:35:49: C0:initBladeSgl: FreeHead:c0010000 FreeTail:c0036380 08/10/15 3:35:49: C0:C0333494: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c20d0400 08/10/15 3:35:49: C0:C03334B4: c003fc00 00000001 ffffffff ffffffff 00000000 00000000 08/10/15 3:35:49: C0:C03334CC: 00000001 00000000 00000000 00000000 00000000 00000000 00000000 c20d0800 08/10/15 3:35:49: C0:C03334EC: c0081800 00000001 ffffffff ffffffff 00000000 00000000 08/10/15 3:35:49: C1:initFreeDDBs=xorPool c0078000-c0081800 genPool c0041c00-c0051c00 runTime 1 numXorDdb 40 numCipherDdb =200 08/10/15 3:35:49: C1:initBladeSGL c0051c00-c0078000 runTime 1 numSglFrame 4c8 08/10/15 3:35:49: C1:initBladeSgl: FreeHead:c0051c00 FreeTail:c0077f80 08/10/15 3:35:49: C0:LdDcmdRaidMapCompleteExt: Completing FW_RAID_MAP cmd 08/10/15 3:35:49: C0:ld sync: all LDs sync'd 08/10/15 3:35:49: C0:LdDcmdRaidMapCompleteExt: Completing FW_RAID_MAP cmd 08/10/15 3:35:52: C0:ld sync: all LDs sync'd 08/10/15 3:38:21: C0:FP_GetSenseData could not get SCSI error as Host had no sense buffer :c00ade00 08/10/15 3:38:42: C0:FP_GetSenseData could not get SCSI error as Host had no sense buffer :c00a5900 # MegaCli -AdpAllInfo -aAll Adapter #0 ============================================================================== Versions ================ Product Name : PERC H730 Mini Serial No : 4CF01GX FW Package Build: 25.3.0.0016 Mfg. Data ================ Mfg. Date : 12/18/14 Rework Date : 12/18/14 Revision No : A00 Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 6.23.03.0_4.16.07.00_0x060C0200 Ctrl-R Version : 5.04-0012 FW Version : 4.250.00-4402 NVDATA Version : 3.1411.00-0019 Boot Block Version : 3.02.00.00-0001 Pending Images in Flash ================ None PCI Info ================ Controller Id : 0000 Vendor Id : 1000 Device Id : 005d SubVendorId : 1028 SubDeviceId : 1f49 Host Interface : PCIE ChipRevision : C0 Link Speed : 3 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 4433221100000000 1 4433221101000000 2 4433221102000000 3 4433221103000000 4 4433221104000000 5 4433221105000000 6 4433221106000000 7 4433221107000000 HW Configuration ================ SAS Address : 544a84200655a100 BBU : Present Alarm : Absent NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Present ROC temperature : 35 degree Celsius Controller temperature : 35 degree Celcius Settings ================ Current Time : 13:1:0 8/10, 2015 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 4 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : 128MB Cluster Mode : Disabled Alarm : Disabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 255 Ecc Bucket Leak Rate : 240 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Disabled Maintain PD Fail History : Disabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : Yes Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 0 Auto Enhanced Import : No Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No POST delay : 90 seconds BIOS Error Handling : Pause on Errors Current Boot Mode :Normal Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 928 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 64 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 0 MB Device Present ================ Virtual Drives : 0 Degraded : 0 Offline : 0 Physical Devices : 9 Disks : 8 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : Yes Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : Yes Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : No Support PI : Yes Support Boot Time PFK Change : No Disable Online PFK Change : No Support LDPI Type1 : No Support LDPI Type2 : Yes Support LDPI Type3 : No Support Shield State : Yes Block SSD Write Disk Cache Change: No Support Online FW Update : Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : Yes Support Breakmirror : Yes Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes NCQ : No Disable Copyback : No Enable JBOD : Yes Enable Copyback on SMART : Yes Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : No Disable Spin Down of hot spares : Yes Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : No Coercion Mode : 128MB ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : 1 Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : No Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 4 Disable Ctrl-R : No Enable Web BIOS : No Direct PD Mapping : Yes BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : No Maintain PD Fail History : No Disable Puncturing : No Zero Based Enclosure Enumeration : Yes PreBoot CLI Enabled : No LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : Yes Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : Yes Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : Yes Max LD per array : 16 Power Saving option : Don't spin down unconfigured drives Don't spin down Hot spares Don't Auto spin down Configured Drives Power settings apply to all drives - individual PD/LD power settings cannot be set Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Cached writes are not used for spun down VDs Can schedule disable power savings at controller level Default spin down time in minutes: 30 Enable JBOD : Yes TTY Log In Flash : Yes Auto Enhanced Import : No BreakMirror RAID Support : Yes Disable Join Mirror : Yes Enable Shield State : No Time taken to detect CME : 60s Exit Code: 0x00 -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-200993-8-zleXsCI8hI>