Date: Tue, 2 Jul 2013 17:30:01 GMT From: Alan Amesbury <amesbury@oitsec.umn.edu> To: freebsd-amd64@FreeBSD.org Subject: Re: amd64/180018: System panics when bsnmpd is started Message-ID: <201307021730.r62HU142072245@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR amd64/180018; it has been noted by GNATS.
From: Alan Amesbury <amesbury@oitsec.umn.edu>
To: bug-followup@FreeBSD.org
Cc:
Subject: Re: amd64/180018: System panics when bsnmpd is started
Date: Tue, 02 Jul 2013 12:27:34 -0500
This is a multi-part message in MIME format.
--------------080902050705040901050908
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
The kernel config is derived from GENERIC and is attached
(OITSEC-9.text). A copy of /var/run/dmesg.boot is also attached
(dmesg_boot.text).
Please let me know if additional diagnostic information is needed.
--
Alan Amesbury
University Information Security
University of Minnesota
--------------080902050705040901050908
Content-Type: text/plain; charset=us-ascii;
name="OITSEC-9.text"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="OITSEC-9.text"
# $Id: OITSEC-9,v 1.3 2012/06/15 00:03:34 amesbury Exp $
# This kernel configuration is largely a stripped down GENERIC with a
# couple additional features tacked on at the end.
# Identify this kernel and pull in GENERIC
include "GENERIC"
ident OITSEC-9
# Turn off built-in-the-kernel support for these devices
nodevice adv
nodevice adw
nodevice ae
nodevice age
nodevice ahd
nodevice aic
nodevice alc
nodevice ale
nodevice amd
nodevice an
nodevice arcmsr
nodevice atapifd
nodevice atapist
nodevice ath
nodevice ath_hal
nodevice ath_pci
nodevice ath_rate_sample
nodevice aue
nodevice axe
nodevice bt
nodevice cardbus
nodevice cbb
nodevice cdce
nodevice ciss
nodevice cs
nodevice cue
nodevice dc
nodevice dcons
nodevice dcons_crom
nodevice de
nodevice dpt
nodevice ed
nodevice ep
nodevice et
nodevice ex
nodevice fdc
nodevice fe
nodevice firewire
nodevice fwe
nodevice fwip
nodevice hptiop
nodevice hptmv
nodevice hptrr
nodevice ida
nodevice iir
nodevice ips
nodevice ipw
nodevice isp
nodevice iwi
nodevice iwn
nodevice ixgbe
nodevice jme
nodevice kue
nodevice le
nodevice lge
nodevice lpt
nodevice malo
nodevice mlx
nodevice mly
nodevice msk
nodevice mwl
nodevice nfe
nodevice nge
nodevice pccard
nodevice pcn
nodevice plip
nodevice ppbus
nodevice ppc
nodevice ppi
nodevice puc
nodevice ral
nodevice rue
nodevice rum
nodevice run
nodevice sf
nodevice sis
nodevice sk
nodevice sn
nodevice snd_cmi
nodevice snd_csa
nodevice snd_emu10kx
nodevice snd_es137x
nodevice snd_hda
nodevice snd_ich
nodevice snd_uaudio
nodevice snd_via8233
nodevice sound
nodevice ste
nodevice stge
nodevice sym
nodevice ti
nodevice tl
nodevice trm
nodevice twa
nodevice twe
nodevice tx
nodevice txp
nodevice u3g
nodevice uark
nodevice uath
nodevice ubsa
nodevice udav
nodevice uftdi
nodevice uipaq
nodevice upgt
nodevice ural
nodevice urio
nodevice urtw
nodevice uslcom
nodevice uvisor
nodevice uvscom
nodevice vge
nodevice vr
nodevice vx
nodevice wb
nodevice wi
nodevice wlan
nodevice wlan_amrr
nodevice wlan_ccmp
nodevice wlan_tkip
nodevice wlan_wep
nodevice wpi
nodevice xe
nodevice zyd
# Turn off these options
nooptions AHD_REG_PRETTY_PRINT
nooptions AH_SUPPORT_AR5416
nooptions COMPAT_FREEBSD4
nooptions COMPAT_FREEBSD5
nooptions COMPAT_FREEBSD6
nooptions COMPAT_FREEBSD7
nooptions COMPAT_IA32
nooptions IEEE80211_AMPDU_AGE
nooptions IEEE80211_DEBUG
nooptions IEEE80211_SUPPORT_MESH
nooptions MD_ROOT
nooptions NFS_ROOT
# Add support for these devices and options
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_HFSC
options DEVICE_POLLING
options IPSEC
options ZERO_COPY_SOCKETS
options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK)
options SC_KERNEL_CONS_REV_ATTR=(FG_YELLOW|BG_RED)
options SC_HISTORY_SIZE=1000
device cpuctl
device crypto
device enc
device pf
device pflog
device pfsync
device carp
--------------080902050705040901050908
Content-Type: text/plain; charset=us-ascii;
name="dmesg_boot.text"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg_boot.text"
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p4 #3: Wed Jun 26 15:47:13 CDT 2013
root@tumbrel.oitsec.umn.edu:/usr/obj/usr/src/sys/OITSEC-9 amd64
CPU: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz (2200.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206d7 Family = 6 Model = 2d Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33058316288 (31526 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 8
cpu9 (AP): APIC ID: 9
cpu10 (AP): APIC ID: 10
cpu11 (AP): APIC ID: 11
cpu12 (AP): APIC ID: 12
cpu13 (AP): APIC ID: 13
cpu14 (AP): APIC ID: 14
cpu15 (AP): APIC ID: 15
cpu16 (AP): APIC ID: 32
cpu17 (AP): APIC ID: 33
cpu18 (AP): APIC ID: 34
cpu19 (AP): APIC ID: 35
cpu20 (AP): APIC ID: 36
cpu21 (AP): APIC ID: 37
cpu22 (AP): APIC ID: 38
cpu23 (AP): APIC ID: 39
cpu24 (AP): APIC ID: 40
cpu25 (AP): APIC ID: 41
cpu26 (AP): APIC ID: 42
cpu27 (AP): APIC ID: 43
cpu28 (AP): APIC ID: 44
cpu29 (AP): APIC ID: 45
cpu30 (AP): APIC ID: 46
cpu31 (AP): APIC ID: 47
ioapic1: Changing APIC ID to 1
ioapic2: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
cpu20: <ACPI CPU> on acpi0
cpu21: <ACPI CPU> on acpi0
cpu22: <ACPI CPU> on acpi0
cpu23: <ACPI CPU> on acpi0
cpu24: <ACPI CPU> on acpi0
cpu25: <ACPI CPU> on acpi0
cpu26: <ACPI CPU> on acpi0
cpu27: <ACPI CPU> on acpi0
cpu28: <ACPI CPU> on acpi0
cpu29: <ACPI CPU> on acpi0
cpu30: <ACPI CPU> on acpi0
cpu31: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
Event timer "HPET7" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.4> port 0xfc80-0xfc9f mem 0xdcb00000-0xdcbfffff,0xdcff0000-0xdcff3fff irq 38 at device 0.0 on pci1
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: bc:30:5b:ed:fa:90
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.4> port 0xfca0-0xfcbf mem 0xdcc00000-0xdccfffff,0xdcff4000-0xdcff7fff irq 37 at device 0.1 on pci1
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: bc:30:5b:ed:fa:91
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 12
igb1: Bound queue 5 to cpu 13
igb1: Bound queue 6 to cpu 14
igb1: Bound queue 7 to cpu 15
igb2: <Intel(R) PRO/1000 Network Connection version - 2.3.4> port 0xfcc0-0xfcdf mem 0xdcd00000-0xdcdfffff,0xdcff8000-0xdcffbfff irq 36 at device 0.2 on pci1
igb2: Using MSIX interrupts with 9 vectors
igb2: Ethernet address: bc:30:5b:ed:fa:92
igb2: Bound queue 0 to cpu 16
igb2: Bound queue 1 to cpu 17
igb2: Bound queue 2 to cpu 18
igb2: Bound queue 3 to cpu 19
igb2: Bound queue 4 to cpu 20
igb2: Bound queue 5 to cpu 21
igb2: Bound queue 6 to cpu 22
igb2: Bound queue 7 to cpu 23
igb3: <Intel(R) PRO/1000 Network Connection version - 2.3.4> port 0xfce0-0xfcff mem 0xdce00000-0xdcefffff,0xdcffc000-0xdcffffff irq 34 at device 0.3 on pci1
igb3: Using MSIX interrupts with 9 vectors
igb3: Ethernet address: bc:30:5b:ed:fa:93
igb3: Bound queue 0 to cpu 24
igb3: Bound queue 1 to cpu 25
igb3: Bound queue 2 to cpu 26
igb3: Bound queue 3 to cpu 27
igb3: Bound queue 4 to cpu 28
igb3: Bound queue 5 to cpu 29
igb3: Bound queue 6 to cpu 30
igb3: Bound queue 7 to cpu 31
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.2 on pci0
pci2: <ACPI PCI bus> on pcib3
mfi0: <Dell PERC H710 Mini (monolithics)> port 0xec00-0xecff mem 0xddffc000-0xddffffff,0xddf80000-0xddfbffff irq 42 at device 0.0 on pci2
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: MaxCmd = 3f0 MaxSgl = 46 state = b73c03f0
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <base peripheral> at device 5.0 (no driver attached)
pci0: <base peripheral> at device 5.2 (no driver attached)
pcib5: <PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci5: <PCI bus> on pcib5
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf8fd000-0xdf8fd3ff irq 23 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0
device_attach: pcib6 attach returned 6
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 0.0 on pci7
pci8: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 on pci9
pci10: <PCI bus> on pcib9
vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xdeffc000-0xdeffffff,0xde000000-0xde7fffff irq 19 at device 0.0 on pci10
pcib10: <PCI-PCI bridge> at device 1.0 on pci8
pci11: <PCI bus> on pcib10
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdf8fe000-0xdf8fe3ff irq 22 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib11: <PCI-PCI bridge> at device 30.0 on pci0
pci12: <PCI bus> on pcib11
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 0xdf8ff000-0xdf8ff7ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib12: <ACPI Host-PCI bridge> on acpi0
pci64: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> irq 85 at device 1.0 on pci64
pci65: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 85 at device 3.0 on pci64
pci66: <ACPI PCI bus> on pcib14
pci64: <base peripheral> at device 5.0 (no driver attached)
pci64: <base peripheral> at device 5.2 (no driver attached)
pcib15: <ACPI Host-PCI bridge> on acpi0
pci63: <ACPI PCI bus> on pcib15
pci63: <base peripheral> at device 8.0 (no driver attached)
pci63: <base peripheral> at device 9.0 (no driver attached)
pci63: <base peripheral> at device 10.0 (no driver attached)
pci63: <base peripheral> at device 10.1 (no driver attached)
pci63: <base peripheral> at device 10.2 (no driver attached)
pci63: <base peripheral> at device 10.3 (no driver attached)
pci63: <base peripheral> at device 11.0 (no driver attached)
pci63: <base peripheral> at device 11.3 (no driver attached)
pci63: <base peripheral> at device 12.0 (no driver attached)
pci63: <base peripheral> at device 12.1 (no driver attached)
pci63: <base peripheral> at device 12.2 (no driver attached)
pci63: <base peripheral> at device 12.3 (no driver attached)
pci63: <base peripheral> at device 12.6 (no driver attached)
pci63: <base peripheral> at device 12.7 (no driver attached)
pci63: <base peripheral> at device 13.0 (no driver attached)
pci63: <base peripheral> at device 13.1 (no driver attached)
pci63: <base peripheral> at device 13.2 (no driver attached)
pci63: <base peripheral> at device 13.3 (no driver attached)
pci63: <base peripheral> at device 13.6 (no driver attached)
pci63: <base peripheral> at device 14.0 (no driver attached)
pci63: <dasp> at device 14.1 (no driver attached)
pci63: <base peripheral> at device 15.0 (no driver attached)
pci63: <base peripheral> at device 15.1 (no driver attached)
pci63: <base peripheral> at device 15.2 (no driver attached)
pci63: <base peripheral> at device 15.3 (no driver attached)
pci63: <base peripheral> at device 15.4 (no driver attached)
pci63: <base peripheral> at device 15.5 (no driver attached)
pci63: <base peripheral> at device 15.6 (no driver attached)
pci63: <base peripheral> at device 16.0 (no driver attached)
pci63: <base peripheral> at device 16.1 (no driver attached)
pci63: <base peripheral> at device 16.2 (no driver attached)
pci63: <base peripheral> at device 16.3 (no driver attached)
pci63: <base peripheral> at device 16.4 (no driver attached)
pci63: <base peripheral> at device 16.5 (no driver attached)
pci63: <base peripheral> at device 16.6 (no driver attached)
pci63: <base peripheral> at device 16.7 (no driver attached)
pci63: <base peripheral> at device 17.0 (no driver attached)
pci63: <base peripheral> at device 19.0 (no driver attached)
pci63: <dasp> at device 19.1 (no driver attached)
pci63: <dasp> at device 19.4 (no driver attached)
pci63: <dasp> at device 19.5 (no driver attached)
pci63: <base peripheral> at device 19.6 (no driver attached)
pcib16: <ACPI Host-PCI bridge> on acpi0
pci127: <ACPI PCI bus> on pcib16
pci127: <base peripheral> at device 8.0 (no driver attached)
pci127: <base peripheral> at device 9.0 (no driver attached)
pci127: <base peripheral> at device 10.0 (no driver attached)
pci127: <base peripheral> at device 10.1 (no driver attached)
pci127: <base peripheral> at device 10.2 (no driver attached)
pci127: <base peripheral> at device 10.3 (no driver attached)
pci127: <base peripheral> at device 11.0 (no driver attached)
pci127: <base peripheral> at device 11.3 (no driver attached)
pci127: <base peripheral> at device 12.0 (no driver attached)
pci127: <base peripheral> at device 12.1 (no driver attached)
pci127: <base peripheral> at device 12.2 (no driver attached)
pci127: <base peripheral> at device 12.3 (no driver attached)
pci127: <base peripheral> at device 12.6 (no driver attached)
pci127: <base peripheral> at device 12.7 (no driver attached)
pci127: <base peripheral> at device 13.0 (no driver attached)
pci127: <base peripheral> at device 13.1 (no driver attached)
pci127: <base peripheral> at device 13.2 (no driver attached)
pci127: <base peripheral> at device 13.3 (no driver attached)
pci127: <base peripheral> at device 13.6 (no driver attached)
pci127: <base peripheral> at device 14.0 (no driver attached)
pci127: <dasp> at device 14.1 (no driver attached)
pci127: <base peripheral> at device 15.0 (no driver attached)
pci127: <base peripheral> at device 15.1 (no driver attached)
pci127: <base peripheral> at device 15.2 (no driver attached)
pci127: <base peripheral> at device 15.3 (no driver attached)
pci127: <base peripheral> at device 15.4 (no driver attached)
pci127: <base peripheral> at device 15.5 (no driver attached)
pci127: <base peripheral> at device 15.6 (no driver attached)
pci127: <base peripheral> at device 16.0 (no driver attached)
pci127: <base peripheral> at device 16.1 (no driver attached)
pci127: <base peripheral> at device 16.2 (no driver attached)
pci127: <base peripheral> at device 16.3 (no driver attached)
pci127: <base peripheral> at device 16.4 (no driver attached)
pci127: <base peripheral> at device 16.5 (no driver attached)
pci127: <base peripheral> at device 16.6 (no driver attached)
pci127: <base peripheral> at device 16.7 (no driver attached)
pci127: <base peripheral> at device 17.0 (no driver attached)
pci127: <base peripheral> at device 19.0 (no driver attached)
pci127: <dasp> at device 19.1 (no driver attached)
pci127: <dasp> at device 19.4 (no driver attached)
pci127: <dasp> at device 19.5 (no driver attached)
pci127: <base peripheral> at device 19.6 (no driver attached)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
AcpiOsExecute: failed to enqueue task, consider increasing the debug.acpi.max_tasks tunable
AcpiOsExecute: failed to enqueue task, consider increasing the debug.acpi.max_tasks tunable
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
est16: <Enhanced SpeedStep Frequency Control> on cpu16
p4tcc16: <CPU Frequency Thermal Control> on cpu16
est17: <Enhanced SpeedStep Frequency Control> on cpu17
p4tcc17: <CPU Frequency Thermal Control> on cpu17
est18: <Enhanced SpeedStep Frequency Control> on cpu18
p4tcc18: <CPU Frequency Thermal Control> on cpu18
est19: <Enhanced SpeedStep Frequency Control> on cpu19
p4tcc19: <CPU Frequency Thermal Control> on cpu19
est20: <Enhanced SpeedStep Frequency Control> on cpu20
p4tcc20: <CPU Frequency Thermal Control> on cpu20
est21: <Enhanced SpeedStep Frequency Control> on cpu21
p4tcc21: <CPU Frequency Thermal Control> on cpu21
est22: <Enhanced SpeedStep Frequency Control> on cpu22
p4tcc22: <CPU Frequency Thermal Control> on cpu22
est23: <Enhanced SpeedStep Frequency Control> on cpu23
p4tcc23: <CPU Frequency Thermal Control> on cpu23
est24: <Enhanced SpeedStep Frequency Control> on cpu24
p4tcc24: <CPU Frequency Thermal Control> on cpu24
est25: <Enhanced SpeedStep Frequency Control> on cpu25
p4tcc25: <CPU Frequency Thermal Control> on cpu25
est26: <Enhanced SpeedStep Frequency Control> on cpu26
p4tcc26: <CPU Frequency Thermal Control> on cpu26
est27: <Enhanced SpeedStep Frequency Control> on cpu27
p4tcc27: <CPU Frequency Thermal Control> on cpu27
est28: <Enhanced SpeedStep Frequency Control> on cpu28
p4tcc28: <CPU Frequency Thermal Control> on cpu28
est29: <Enhanced SpeedStep Frequency Control> on cpu29
p4tcc29: <CPU Frequency Thermal Control> on cpu29
est30: <Enhanced SpeedStep Frequency Control> on cpu30
p4tcc30: <CPU Frequency Thermal Control> on cpu30
est31: <Enhanced SpeedStep Frequency Control> on cpu31
p4tcc31: <CPU Frequency Thermal Control> on cpu31
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
mfi0: 2588 (425607728s/0x0020/info) - Shutdown command received from host
mfi0: 2589 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 005b/1000/1f38/1028)
mfi0: 2590 (boot + 4s/0x0020/info) - Firmware version 3.130.05-1462
mfi0: 2591 (boot + 5s/0x0008/info) - Battery Present
mfi0: 2592 (boot + 5s/0x0020/info) - Package version 21.0.1-0132
mfi0: 2593 (boot + 5s/0x0020/info) - Board Revision A01
mfi0: 2594 (boot + 19s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 2595 (boot + 19s/0x0002/info) - Inserted: Encl PD 20
mfi0: 2596 (boot + 19s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5e4ae02097019d00,0000000000000000
mfi0: 2597 (boot + 19s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 2598 (boot + 19s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=5000cca0256d4259,0000000000000000
mfi0: 2599 (boot + 19s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 2600 (boot + 19s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=5000cca0256d34e5,0000000000000000
mfi0: 2601 (boot + 19s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 2602 (boot + 19s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca025677715,0000000000000000
mfi0: 2603 (boot + 19s/0x0002/info) - Inserted: PD 03(e0x20/s3)
mfi0: 2604 (boot + 19s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=5000cca025709649,0000000000000000
mfi0: 2605 (boot + 19s/0x0002/info) - Inserted: PD 04(e0x20/s4)
mfi0: 2606 (boot + 19s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca0256e5eb5,0000000000000000
mfi0: 2607 (boot + 19s/0x0002/info) - Inserted: PD 05(e0x20/s5)
mfi0: 2608 (boot + 19s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=5000cca025704f3d,0000000000000000
mfi0: 2609 (425607804s/0x0020/info) - Time established as 06/27/13 0:23:24; (51 seconds since power on)
mfi0: 2610 (425607823s/0x0008/info) - Battery temperature is normal
mfi0: 2611 (425607823s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 2612 (425607919s/0x0020/info) - Host driver is loaded and operational
mfi0: 2613 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 005b/1000/1f38/1028)
mfi0: 2614 (boot + 4s/0x0020/info) - Firmware version 3.130.05-1462
mfi0: 2615 (boot + 5s/0x0008/info) - Battery Present
mfi0: 2616 (boot + 5s/0x0020/info) - Package version 21.0.1-0132
mfi0: 2617 (boot + 5s/0x0020/info) - Board Revision A01
mfi0: 2618 (boot + 43s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5e4ae02097019d00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00
mfi0: 2619 (boot + 45s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 2620 (boot + 45s/0x0002/info) - Inserted: Encl PD 20
mfi0: 2621 (boot + 45s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5e4ae02097019d00,0000000000000000
mfi0: 2622 (boot + 45s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 2623 (boot + 45s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=5000cca0256d4259,0000000000000000
mfi0: 2624 (boot + 45s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 2625 (boot + 45s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=5000cca0256d34e5,0000000000000000
mfi0: 2626 (boot + 45s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 2627 (boot + 45s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=5000cca025677715,0000000000000000
mfi0: 2628 (boot + 45s/0x0002/info) - Inserted: PD 03(e0x20/s3)
mfi0: 2629 (boot + 45s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=5000cca025709649,0000000000000000
mfi0: 2630 (boot + 45s/0x0002/info) - Inserted: PD 04(e0x20/s4)
mfi0: 2631 (boot + 45s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca0256e5eb5,0000000000000000
mfi0: 2632 (boot + 45s/0x0002/info) - Inserted: PD 05(e0x20/s5)
mfi0: 2633 (boot + 45s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca025704f3d,0000000000000000
mfi0: 2634 (425608464s/0x0020/info) - Time established as 06/27/13 0:34:24; (47 seconds since power on)
mfi0: 2635 (425608487s/0x0008/info) - Battery temperature is normal
mfi0: 2636 (425608487s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 2637 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 005b/1000/1f38/1028)
mfi0: 2638 (boot + 4s/0x0020/info) - Firmware version 3.130.05-1462
mfi0: 2639 (boot + 5s/0x0008/info) - Battery Present
mfi0: 2640 (boot + 5s/0x0020/info) - Package version 21.0.1-0132
mfi0: 2641 (boot + 5s/0x0020/info) - Board Revision A01
mfi0: 2642 (boot + 43s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5e4ae02097019d00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00
mfi0: 2643 (boot + 45s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 2644 (boot + 45s/0x0002/info) - Inserted: Encl PD 20
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mfid0 on mfi0
mfid0: 856704MB (1754529792 sectors) RAID volume 'Host' is optimal
mfi0: 2645 (boot + 45s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5e4ae02097019d00,0000000000000000
mfi0: 2646 (boot + 45s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 2647 (boot + 45s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=5000cca0256d4259,0000000000000000
mfi0: 2648 (boot + 45s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 2649 (boot + 45s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=5000cca0256d34e5,0000000000000000
mfi0: 2650 (boot + 45s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 2651 (boot + 45s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca025677715,00uhub0: 2 ports with 2 removable, self powered
00000000000000
mfi0: 2652 (boot + 45s/0x0002/info) - Inserted: PD 03(e0x20/s3)
mfi0: 2653 (boot + 45s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=5000cca025709649,00uhub1: 2 ports with 2 removable, self powered
00000000000000
mfi0: 2654 (boot + 45s/0x0002/info) - Inserted: PD 04(e0x20/s4)
mfi0: 2655 (boot + 45s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca0256e5eb5,0000000000000000
mfi0: 2656 (boot + 45s/0x0002/info) - Inserted: PD 05(e0x20/s5)
mfi0: 2657 (boot + 45s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=5000cca025704f3d,0000000000000000
mfi0: 2658 (425608581s/0x0020/info) - Time established as 06/27/13 0:36:21; (51 seconds since power on)
mfi0: 2659 (425608600s/0x0008/info) - Battery temperature is normal
mfi0: 2660 (425608600s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 2661 (425608747s/0x0020/info) - Host driver is loaded and operational
AcpiOsExecute: failed to enqueue task, consider increasing the debug.acpi.max_tasks tunable
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.HEC2.HSCI] (Node 0xfffffe000d7d0680), AE_NO_MEMORY (20110527/psparse-560)
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ACPI Error: Method parse/execution failed [\\_GPE._L24] (Node 0xfffffe000d7dd5c0)ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
, AE_NO_MEMORY (20110527/psparse-560)
ACPI Exception: AE_NO_MEMORY, while evaluating GPE method [_L24] (20110527/evgpe-606)
AcpiOsExecute: failed to enqueue task, consider increasing the debug.acpi.max_tasks tunable
cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
SMP: AP CPU #31 Launched!
SMP: AP CPU #1 Launched!
cd0: <HL-DT-ST DVD+-RW GU40N A300> Removable CD-ROM SCSI-0 device
SMP: AP CPU #22 Launched!
SMP: AP CPU #8 Launched!
cd0: 150.000MB/s transfers (SMP: AP CPU #9 Launched!
SATA 1.x, SMP: AP CPU #2 Launched!
UDMA6, SMP: AP CPU #5 Launched!
ATAPI 12bytes, SMP: AP CPU #27 Launched!
PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #18 Launched!
SMP: AP CPU #20 Launched!
SMP: AP CPU #26 Launched!
SMP: AP CPU #24 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #23 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #30 Launched!
SMP: AP CPU #28 Launched!
SMP: AP CPU #21 Launched!
SMP: AP CPU #25 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #29 Launched!
Timecounter "TSC-low" frequency 8593937 Hz quality 1000
uhub2: 6 ports with 6 removable, self powered
Root mount waiting for: usbus1 usbus0
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <Dell Computer Corp.> at usbus0
umass0: <Dell Computer Corp. Internal Dual SD, class 0/0, rev 2.00/1.10, addr 3> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:7:0:-1: Attached to scbus7
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Dell Internal Dual SD 1.:> Fixed Direct Access SCSI-5 device
da0: 40.000MB/s transfers
da0: 972MB (1990656 512 byte sectors: 64H 32S/T 972C)
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.4: <vendor 0x13fe> at usbus0
umass1: <vendor 0x13fe Patriot Memory, class 0/0, rev 2.10/1.00, addr 4> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0x0100
umass1:8:1:-1: Attached to scbus8
da1 at umass-sim1 bus 1 scbus8 target 0 lun 0
da1: < Patriot Memory PMAP> Removable Direct Access SCSI-4 device
da1: 40.000MB/s transfers
da1: 30160MB (61767680 512 byte sectors: 255H 63S/T 3844C)
Root mount waiting for: usbus0
ugen0.5: <no manufacturer> at usbus0
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 5> on usbus0
Root mount waiting for: usbus0
uhub4: 6 ports with 6 removable, self powered
ugen0.6: <Avocent> at usbus0
ukbd0: <Keyboard> on usbus0
kbd0 at ukbd0
ums0: <Mouse> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
Root mount waiting for: usbus0
ums1: <Mouse REL> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/gpt/root [rw]...
WARNING: / was not properly dismounted
ZFS filesystem version 5
ZFS storage pool version 28
--------------080902050705040901050908--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201307021730.r62HU142072245>