Date: Tue, 19 Apr 2005 10:21:29 -0400 From: "M. Parsons" <mrparsons@gmail.com> To: "M. Parsons" <mrparsons@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: error with cvsup/ezm3-1.2 ? Message-ID: <426513E9.9070802@gmail.com> In-Reply-To: <42651353.3060106@gmail.com> References: <42651353.3060106@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Never mind, found results on google, I was trying to compile with -O2, using just -O works. :-) Mark M. Parsons wrote: > Trying to install cvsup via ports, I cd into /usr/ports/net/cvsup and > it wants to install ezm3, which is fine, but during the ezm3 install, > this happens: > > Any ideas on how to fix it? > > missing version stamps -> compiling ../src/C/FreeBSD4/Csignal.i3 > missing version stamps -> compiling ../src/C/FreeBSD4/Cstring.i3 > missing version stamps -> compiling ../src/C/FreeBSD4/Cstdio.i3 > new source -> compiling ../src/float/IEEE/Real.i3 > > > *** > *** runtime error: > *** Segmentation violation - possible attempt to dereference NIL > *** pc = 0x8157d8c > *** > > use option @M3stackdump to get a stack trace > > m3build: quake error: quake error: runtime error: m3build failed with > error code: 34304 > > --procedure-- -line- -file--- > error -- <builtin> > BuildChunk 164 /usr/ports/lang/ezm3/work/ezm3-1.2/src/m3makefile > PkgInfo 240 /usr/ports/lang/ezm3/work/ezm3-1.2/src/m3makefile > 38 /usr/ports/lang/ezm3/work/ezm3-1.2/src/PACKAGES > > gmake: *** [packages] Error 1 > *** Error code 2 > > Stop in /usr/ports/lang/ezm3. > *** Error code 1 > > Stop in /usr/ports/net/cvsup. > > > attached is also my dmesg if anyone wants a look at it? (bad paste job > as well) > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.3-RELEASE #0: Sun Apr 17 09:22:09 EDT 2005 > daman@freebsd.sympatico.ca:/usr/src/sys/i386/compile/POLLINGSMP > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Pentium II/Pentium II Xeon/Celeron (333.06-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x650 Stepping = 0 > > Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO > > V,PAT,PSE36,MMX,FXSR> > real memory = 268435456 (256 MB) > avail memory = 253046784 (241 MB) > MPTable: <INTEL 440LX > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Assuming intbase of 0 > ioapic0 <Version 1.1> irqs 0-23 on motherboard > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82443LX (440 LX) host to PCI bridge> pcibus 0 on > motherboard > pci0: <PCI bus> on pcib0 > agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem > 0xf0000000-0xf7ffffff at de > vice 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 UDMA33 controller> port > 0xffa0-0xffaf,0x376,0x170-0x177,0x3 > f6,0x1f0-0x1f7 at device 7.1 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > pci0: <serial bus, USB> at device 7.2 (no driver attached) > piix0: <PIIX Timecounter> port 0xfcb0-0xfcbf at device 7.3 on pci0 > Timecounter "PIIX" frequency 3579545 Hz quality 0 > ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xef40-0xef5f irq 11 at > device 12. > 0 on pci0 > ed0: [GIANT-LOCKED] > ed0: Ethernet address: 00:80:c8:dd:2d:a2 > ed0: if_start running deferred for Giant > type NE2000 (16 bit) > de0: <Digital 21140A Fast Ethernet> port 0xec80-0xecff mem > 0xfebfff80-0xfebfffff > irq 10 at device 13.0 on pci0 > de0: [GIANT-LOCKED] > de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0 > de0: Ethernet address: 00:e0:29:00:df:0d > de0: if_start running deferred for Giant > cpu0 on motherboard > cpu1 on motherboard > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on > isa0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ep0: <3Com 3C509-TPO EtherLink III> at port 0x350-0x35f irq 5 on isa0 > ep0: Ethernet address: 00:50:04:a3:35:62 > unknown: <PNP0303> can't assign resources (port) > unknown: <PNP0c02> can't assign resources (port) > unknown: <PNP0700> can't assign resources (port) > Timecounters tick every 1.000 msec > ad0: 3093MB <FUJITSU MPB3032ATU E/4010> [6704/15/63] at ata0-master > UDMA33 > ad2: 4125MB <FUJITSU MPC3043AT/6018> [8940/15/63] at ata1-master UDMA33 > SMP: AP CPU #1 Launched! > Mounting root from ufs:/dev/ad0s1a > de0: enabling Full Duplex 100baseTX port > IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled > de0: enabling 100baseTX port > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?426513E9.9070802>