From owner-freebsd-current@FreeBSD.ORG Tue Sep 21 06:11:47 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7E50416A4CE; Tue, 21 Sep 2004 06:11:47 +0000 (GMT) Received: from zibbi.icomtek.csir.co.za (zibbi.icomtek.csir.co.za [146.64.24.58]) by mx1.FreeBSD.org (Postfix) with ESMTP id 86B5743D41; Tue, 21 Sep 2004 06:11:19 +0000 (GMT) (envelope-from jhay@icomtek.csir.co.za) Received: from zibbi.icomtek.csir.co.za (localhost [127.0.0.1]) i8L6BAQD033455; Tue, 21 Sep 2004 08:11:13 +0200 (SAST) (envelope-from jhay@zibbi.icomtek.csir.co.za) Received: (from jhay@localhost)i8L6BAJq033454; Tue, 21 Sep 2004 08:11:10 +0200 (SAST) (envelope-from jhay) Date: Tue, 21 Sep 2004 08:11:10 +0200 From: John Hay To: Pawel Jakub Dawidek Message-ID: <20040921061110.GA33071@zibbi.icomtek.csir.co.za> References: <20040920170724.GA9605@zibbi.icomtek.csir.co.za> <20040920173224.GJ88658@darkness.comp.waw.pl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20040920173224.GJ88658@darkness.comp.waw.pl> User-Agent: Mutt/1.4.1i cc: freebsd-current@freebsd.org Subject: Re: race between geom and root mount X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 Sep 2004 06:11:47 -0000 On Mon, Sep 20, 2004 at 07:32:24PM +0200, Pawel Jakub Dawidek wrote: > On Mon, Sep 20, 2004 at 07:07:25PM +0200, John Hay wrote: > +> The last day I have been trying to setup a geom mirror to boot from. I > +> have tried various ways of configuring it, geom mirror on the raw disk > +> and also geom mirror inside a slice, also without any slices etc. But > +> everytime I could get it to load the kernel and boot up to the point > +> where it should mount the root partition and then it would fail and > +> give the prompt where you can type the name of the root partition you > +> want to mount. Even by typing the partition name at the prompt could > +> not get it to work. Then today I noticed that after I got the prompt > +> for the root partition a few more geom messages were printed. Then I > +> disabled smp by setting kern.smp.disabled="1" and it booted fine. > > Maybe you're a victim of the problem which was just fixed in -CURRENT. > Could you try g_mirror.c rev. 1.27 and g_label.c rev. 1.10? I have built a RELENG_5 kernel with g_mirror.c 1.28 and g_label.c 1.11, but it still does the same. I booted over a serial console and here is the capture of a boot -v. The order of the last few lines is a little different when booting using a serial and vga console, but neither works. :-) With a vga console some of the GEOM messages arrive after the Mounting Root message. On both some of the last messages are pretty garbled. John -- John Hay -- John.Hay@icomtek.csir.co.za / jhay@FreeBSD.org OK boot -v /boot/kernel/acpi.ko text=0x3f958 data=0x1be4+0x110c syms=[0x4+0x72a0+0x4+0x943] SMAP type=01 base=0000000000000000 len=000000000009f800 SMAP type=02 base=000000000009f800 len=0000000000000800 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=000000000fef0000 SMAP type=03 base=000000000fff0000 len=000000000000f000 SMAP type=04 base=000000000ffff000 len=0000000000001000 SMAP type=02 base=00000000ffb00000 len=0000000000500000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA5 #0: Mon Sep 20 19:47:12 UTC 2004 jhay@dolphin.icomtek.csir.co.za:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a22000. Preloaded elf module "/boot/kernel/geom_label.ko" at 0xc0a22200. Preloaded elf module "/boot/kernel/geom_mirror.ko" at 0xc0a222b0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a22360. Calibrating clock(s) ... i8254 clock: 1193111 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2992514730 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf33 Stepping = 3 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 268369920 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000000fb3ffff, 250703872 bytes (61207 pages) avail memory = 253063168 (241 MB) Table 'FACP' at 0xfff0200 Table 'APIC' at 0xfff0390 MADT: Found table at 0xfff0390 MP Configuration Table version 1.4 found at 0xc00fbf50 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f5020 pnpbios: Entry = f0000:5d44 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec10000 ioapic1: intpin 0 -> PCI IRQ 24 (level, low) ioapic1: intpin 1 -> PCI IRQ 25 (level, low) ioapic1: intpin 2 -> PCI IRQ 26 (level, low) ioapic1: intpin 3 -> PCI IRQ 27 (level, low) ioapic1: intpin 4 -> PCI IRQ 28 (level, low) ioapic1: intpin 5 -> PCI IRQ 29 (level, low) ioapic1: intpin 6 -> PCI IRQ 30 (level, low) ioapic1: intpin 7 -> PCI IRQ 31 (level, low) ioapic1: intpin 8 -> PCI IRQ 32 (level, low) ioapic1: intpin 9 -> PCI IRQ 33 (level, low) ioapic1: intpin 10 -> PCI IRQ 34 (level, low) ioapic1: intpin 11 -> PCI IRQ 35 (level, low) ioapic1: intpin 12 -> PCI IRQ 36 (level, low) ioapic1: intpin 13 -> PCI IRQ 37 (level, low) ioapic1: intpin 14 -> PCI IRQ 38 (level, low) ioapic1: intpin 15 -> PCI IRQ 39 (level, low) ioapic1: intpin 16 -> PCI IRQ 40 (level, low) ioapic1: intpin 17 -> PCI IRQ 41 (level, low) ioapic1: intpin 18 -> PCI IRQ 42 (level, low) ioapic1: intpin 19 -> PCI IRQ 43 (level, low) ioapic1: intpin 20 -> PCI IRQ 44 (level, low) ioapic1: intpin 21 -> PCI IRQ 45 (level, low) ioapic1: intpin 22 -> PCI IRQ 46 (level, low) ioapic1: intpin 23 -> PCI IRQ 47 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: intr override: source 10, irq 10 ioapic0: intpin 10 trigger: level ioapic0: intpin 10 polarity: high lapic0: Routing NMI -> LINT1 lapic1: Routing NMI -> LINT1 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> random: io: mem: Pentium Pro MTRR support enabled null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25788086) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00f4ee0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x60 3 4 5 6 7 9 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 11 12 14 15 embedded 0 3 B 0x62 3 4 5 6 9 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 9 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 11 12 14 15 slot 1 2 2 A 0xf9 9 slot 1 2 2 B 0xf9 9 slot 1 2 2 C 0xf9 9 slot 1 2 2 D 0xf9 9 slot 2 2 3 A 0xf9 9 slot 2 2 3 B 0xf9 9 slot 2 2 3 C 0xf9 9 slot 2 2 3 D 0xf9 9 slot 3 2 4 A 0xf9 9 slot 3 2 4 B 0xf9 9 slot 3 2 4 C 0xf9 9 slot 3 2 4 D 0xf9 9 slot 6 3 2 A 0x60 3 4 5 6 7 9 11 12 14 15 slot 6 3 2 B 0x61 3 4 5 6 7 9 11 12 14 15 slot 6 3 2 C 0x62 3 4 5 6 9 11 12 14 15 slot 6 3 2 D 0x63 3 4 5 6 7 9 11 12 14 15 embedded 3 0 A 0x69 3 4 5 6 7 9 11 12 14 15 embedded 3 1 A 0x61 3 4 5 6 7 9 11 12 14 15 embedded 2 1 A 0xf9 9 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 cpu1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base fe800000, size 22, enabled found-> vendor=0x8086, dev=0x2578, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x257b, revid=0x02 bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25ae, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0146, statreg=0x0030, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000e800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x25a9, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[20]: type 4, range 32, base 0000ec00, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x25aa, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=19 found-> vendor=0x8086, dev=0x25ab, revid=0x02 bus=0, slot=29, func=4 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25ac, revid=0x02 bus=0, slot=29, func=5 class=08-00-20, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base fe7ffc00, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x25ad, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=23 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0x0a bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25a1, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fc00, size 4, enabled found-> vendor=0x8086, dev=0x25a2, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000e400, size 3, enabled map[14]: type 4, range 32, base 0000e000, size 2, enabled map[18]: type 4, range 32, base 0000dc00, size 3, enabled map[1c]: type 4, range 32, base 0000d800, size 2, enabled map[20]: type 4, range 32, base 0000d400, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x25a3, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0045, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 map[20]: type 4, range 32, base 00000400, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x25a4, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 pcib1: at device 3.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xfc500000-0xfc5fffff pcib1: prefetched decode 0xfff00000-0xfffff pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.P0P2 - AE_NOT_FOUND pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base fc5e0000, size 17, enabled pcib1: device (null) requested decoded memory range 0xfc5e0000-0xfc5fffff map[18]: type 4, range 32, base 0000bc00, size 5, enabled pcib1: device (null) requested decoded I/O range 0xbc00-0xbc1f pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 18 pcib1: slot 1 INTA is routed to irq 18 found-> vendor=0x8086, dev=0x1075, revid=0x00 bus=1, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0238, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 powerspec 2 supports D0 D3 current D0 em0: port 0xbc00-0xbc1f mem 0xfc5e0000-0xfc5fffff irq 18 at device 1.0 on pci1 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc5e0000 em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0xbc00 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:0e:0c:4d:68:64 em0: Speed:N/A Duplex:N/A pcib2: at device 28.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff ACPI PCI link initial configuration: pci2: on pcib2 pci2: physical bus=2 uhci0: port 0xe800-0xe81f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xec00-0xec1f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: at device 29.4 (no driver attached) pci0: at device 29.5 (no driver attached) pci0: at device 29.7 (no driver attached) pcib3: at device 30.0 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfc600000-0xfe6fffff pcib3: prefetched decode 0xfff00000-0xfffff pcib3: Subtractively decoded bridge. ACPI PCI link initial configuration: pci3: on pcib3 pci3: physical bus=3 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib3: device (null) requested decoded memory range 0xfd000000-0xfdffffff map[14]: type 4, range 32, base 0000c800, size 8, enabled pcib3: device (null) requested decoded I/O range 0xc800-0xc8ff map[18]: type 1, range 32, base fe6ff000, size 12, enabled pcib3: device (null) requested decoded memory range 0xfe6ff000-0xfe6fffff pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 21 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=3, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fe6fe000, size 12, enabled pcib3: device (null) requested decoded memory range 0xfe6fe000-0xfe6fefff map[14]: type 4, range 32, base 0000cc00, size 6, enabled pcib3: device (null) requested decoded I/O range 0xcc00-0xcc3f map[18]: type 1, range 32, base fe6a0000, size 17, enabled pcib3: device (null) requested decoded memory range 0xfe6a0000-0xfe6bffff pcib3: matched entry for 3.1.INTA pcib3: slot 1 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x1229, revid=0x10 bus=3, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=17 powerspec 2 supports D0 D1 D2 D3 current D0 pci3: at device 0.0 (no driver attached) fxp0: port 0xcc00-0xcc3f mem 0xfe6a0000-0xfe6bffff,0xfe6fe000-0xfe6fefff irq 17 at device 1.0 on pci3 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe6fe000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 342f 0010 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:0e:0c:4d:68:65 fxp0: [MPSAFE] isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata0: reset tp2 stat0=01 stat1=01 devices=0x0 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata1-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata1: reset tp2 stat0=01 stat1=01 devices=0x0 ata1: [MPSAFE] atapci1: port 0xd400-0xd40f,0xd800-0xd803,0xdc00-0xdc07,0xe000-0xe003,0xe400-0xe407 irq 18 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400 atapci1: [MPSAFE] ata2: channel #0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe400 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe000 ata2: reset tp1 mask=03 ostat0=80 ostat1=80 ata2-master: stat=0x80 err=0xff lsb=0xff msb=0xff ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata3: channel #1 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xdc00 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd800 ata3: reset tp1 mask=03 ostat0=80 ostat1=80 ata3-master: stat=0x80 err=0xff lsb=0xff msb=0xff ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xd5000-0xd5fff,0xc9000-0xca7ff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2992514730 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% em0: Link is up 100 Mbps Full Duplex ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ad4: ATA-6 disk at ata2-master ad4: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, SATA150 GEOM: new disk ad4 ar: FreeBSD check1 failed GEOM: Configure label/disk0, start 0 length 80026361344 end 80026361343 GEOM_LABEL: Label for provider ad4 is label/disk0. ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ad6: ATA-6 disk at ata3-master ad6: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, SATA150 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 ar: FreeBSD check1 failed SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 10 (ISA IRQ 10) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 GEOM: Configure ad4a, start 0 length 536870912 end 536870911 GEOM: Configure ad4b, start 536870912 length 1073741824 end 1610612735 GEOM: Configure ad4c, start 0 length 80026360832 end 80026360831 GEOM: Configure ad4d, start 1610612736 length 536870912 end 2147483647 GEOM: Configure ad4e, start 2147483648 length 77878877184 end 80026360831 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM_MIRROR: Device gm0 created (id=792435012). GEOM_MIRROR: Device gm0: provider label/disk0 detected. GEOM: Configure label/disk0a, start 0 length 536870912 end 536870911 GEOM: Configure label/disk0b, start 536870912 length 1073741824 end 1610612735 GEOM: Configure label/disk0c, start 0 length 80026360832 end 80026360831 GEOM: Configure label/disk0d, start 1610612736 length 536870912 end 2147483647 GEOM: Configure label/disk0e, start 2147483648 length 77878877184 end 80026360831 GEOM: new disk ad6 GEOM: Configure label/disk1, start 0 length 80026361344 end 80026361343 GEOM_LABEL: Label for provider ad6 is label/disk1. [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM: Configure ad6a, start 0 length 536870912 end 536870911 GEOM: Configure ad6b, start 536870912 length 1073741824 end 1610612735 GEOM: Configure ad6c, start 0 length 80026360832 end 80026360831 GEOM: Configure ad6d, start 1610612736 length 536870912 end 2147483647 GEOM: Configure ad6e, start 2147483648 length 77878877184 end 80026360831 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM_MIRROR: Device gm0: provider label/disk1 detected. GEOM: Configure label/disk1a, start 0 length 536870912 end 536870911 GEOM: Configure label/disk1b, start 536870912 length 1073741824 end 1610612735 GEOM: Configure label/disk1c, start 0 length 80026360832 end 80026360831 GEOM: Configure label/disk1d, start 1610612736 length 536870912 end 2147483647 GEOM: Configure label/disk1e, start 2147483648 length 77878877184 end 80026360831 MGoEuOnMt_iMnIgR RrOoRo:t Dfervoimc eu fgsm:0/:d epvr/omviirdreorr /lgamb0eal / disk1 saecttriovoattbeydn.a m e failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: : Mount using filesystem eg. ufs:da0s1a ? List valid disk boot devices Abort manual input mountroot>