Date: Tue, 28 Oct 2003 15:39:34 -0600 (CST) From: "Pranav A. Desai" <pdesai1@cs.uh.edu> To: "J. Seth Henry" <jshamlet@comcast.net> Cc: freebsd-questions@freebsd.org Subject: RE: Via EPIA 800Mhz Message-ID: <Pine.GSO.4.33.0310281536560.8184-100000@themis.cs.uh.edu> In-Reply-To: <200310281610.51573.jshamlet@comcast.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I have the same options in the kernel config ... it still does the same thing :( ... now I am certain I am doing something wrong ... I think I will the GENERIC kernel config and see if that works ... Thanks for your help -Pranav ******************************************************************* Pranav A. Desai On Tue, 28 Oct 2003, J. Seth Henry wrote: > >Hi! > > > >=A0 Does anyone know if the Via EPIA 800MHz is supported in any version = of > >freebsd. I tried it with 4.6.2 and it reboots as soon as kernel loads. > >Or do I need to enable any specific options in the kernel config. > > > >It has the following CPU- > >VIA C3 800 E-Series processor, 800 MHz > > > >I would appreciate any kind of help. > > > >Thanks > > > >******************************************************************* > > Pranav A. Desai > > Yes, it does. My ipfilter/NAT machine is running 4.8-REL on a 933MHz EPIA > board, and I have an X terminal running 4.8-REL on a 800MHz EPIA board. > > I use the following kernel configuration (for the X terminal): > > # Kernel configuration for gearbox (4/25/2003) working copy > > machine=09=09i386 > cpu=09=09I686_CPU > ident=09=09gearbox > maxusers=090 > > options =09INET=09=09=09#InterNETworking > #options=09=09INET6=09=09=09#IPv6 Communications Protocols > options=09=09FFS=09=09=09#Berkeley Fast Filesystem > options =09FFS_ROOT=09=09#FFS usable as root device [keep this!] > options =09SOFTUPDATES=09=09#Enable FFS soft updates support > options =09MFS=09=09=09#Memory Filesystem > options =09MD_ROOT=09=09=09#MD is a potential root device > options =09MSDOSFS=09=09=09#MSDOS Filesystem > options =09CD9660=09=09=09#ISO 9660 Filesystem > options =09CD9660_ROOT=09=09#CD-ROM usable as root, CD9660 required > options =09PROCFS=09=09=09#Process filesystem > options =09COMPAT_43=09=09#Compatible with BSD 4.3 [KEEP THIS!] > options =09SCSI_DELAY=3D1000=09=09#Delay (in ms) before probing SCSI > options =09UCONSOLE=09=09#Allow users to grab the console > options =09USERCONFIG=09=09#boot -c editor > options =09VISUAL_USERCONFIG=09#visual boot -c editor > options =09KTRACE=09=09=09#ktrace(1) support > options =09SYSVSHM=09=09=09#SYSV-style shared memory > options =09SYSVMSG=09=09=09#SYSV-style message queues > options =09SYSVSEM=09=09=09#SYSV-style semaphores > options =09P1003_1B=09=09#Posix P1003_1B real-time extensions > options =09_KPOSIX_PRIORITY_SCHEDULING > options=09=09ICMP_BANDLIM=09=09#Rate limit bad replies > options =09KBD_INSTALL_CDEV=09# install a CDEV entry in /dev > options=09=09QUOTA > options=09=09SUIDDIR > options=09=09NO_F00F_HACK > options=09=09DDB_UNATTENDED > > device=09=09isa > device=09=09eisa > device=09=09pci > > # Floppy drives > #device=09=09fdc0=09at isa? port IO_FD1 irq 6 drq 2 > #device=09=09fd0=09at fdc0 drive 0 > #device=09=09fd1=09at fdc0 drive 1 > > # ATA and ATAPI devices > device=09=09ata > device=09=09atadisk=09=09=09# ATA disk drives > device=09=09atapicd=09=09=09# ATAPI CDROM drives > #device=09=09atapifd=09=09=09# ATAPI floppy drives > #device=09=09atapist=09=09=09# ATAPI tape drives > options =09ATA_STATIC_ID=09=09#Static device numbering > > # SCSI Controllers > #device=09=09ahc=09=09# AHA2940 and onboard AIC7xxx devices > #device=09=09sym=09=09# NCR/Symbios Logic device > > # SCSI peripherals > device=09=09scbus=09=09# SCSI bus (required) > device=09=09da=09=09# Direct Access (disks) > #device=09=09sa=09=09# Sequential Access (tape etc) > device=09=09cd=09=09# CD > device=09=09pass=09=09# Passthrough device (direct SCSI access) > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device=09=09atkbdc0=09at isa? port IO_KBD > device=09=09atkbd0=09at atkbdc? irq 1 flags 0x1 > device=09=09psm0=09at atkbdc? irq 12 > device=09=09vga0=09at isa? > > # splash screen/screen saver > pseudo-device=09splash > > # syscons is the default console driver, resembling an SCO console > device=09=09sc0=09at isa? flags 0x100 > > # Floating point support - do not disable. > device=09=09npx0=09at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > #device=09=09apm0 at nexus? disable flags 0x20 # Advanced Power Manage= ment > > # Serial (COM) ports > device=09=09sio0=09at isa? port IO_COM1 irq 4 > device=09=09sio1=09at isa? port IO_COM2 flags 0x10 irq 3 > > # Parallel port > device=09=09ppc0=09at isa? irq 7 > device=09=09ppbus=09=09# Parallel port bus (required) > device=09=09lpt=09=09# Printer > device=09=09plip=09=09# TCP/IP over parallel > device=09=09ppi=09=09# Parallel port interface device > #device=09=09vpo=09=09# Requires scbus and da > > > # PCI Ethernet NICs. > device=09=09miibus > device=09=09vr=09=09# Intel EtherExpress PRO/100B (82557, 82558) > > # Pseudo devices - the number indicates how many units to allocate. > pseudo-device=09loop=09=09# Network loopback > pseudo-device=09ether=09=09# Ethernet support > pseudo-device=09sl=091=09# Kernel SLIP > #pseudo-device=09ppp=091=09# Kernel PPP > #pseudo-device=09tun=09=09# Packet tunnel. > pseudo-device=09pty=09=09# Pseudo-ttys (telnet etc) > pseudo-device=09md=09=09# Memory "disks" > pseudo-device=09gif=094=09# IPv6 and IPv4 tunneling > pseudo-device=09faith=091=09# IPv6-to-IPv4 relaying (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > pseudo-device=09bpf=09=09#Berkeley packet filter > > # USB support > device=09=09uhci=09=09# UHCI PCI->USB interface > device=09=09ohci=09=09# OHCI PCI->USB interface > device=09=09usb=09=09# USB Bus (required) > device=09=09ugen=09=09# Generic > device=09=09uhid=09=09# "Human Interface Devices" > device=09=09ukbd=09=09# Keyboard > device=09=09ulpt=09=09# Printer > device=09=09umass=09=09# Disks/Mass storage - Requires scbus and da > device=09=09ums=09=09# Mouse > device=09=09uscanner=09# Scanners > device ucom > device uplcom > device uvscom > device uvisor > device uftdi > > # Sound Support > device=09=09pcm > device=09=09joy0=09at isa? port IO_GAME > > Regards, > Seth Henry >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.33.0310281536560.8184-100000>