From owner-freebsd-current  Thu Nov  7  0:20:41 2002
Delivered-To: freebsd-current@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id AD41C37B401
	for <current@FreeBSD.ORG>; Thu,  7 Nov 2002 00:20:10 -0800 (PST)
Received: from smtp1.powertech.no (smtp1.powertech.no [195.159.0.145])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 4E69D43E4A
	for <current@FreeBSD.ORG>; Thu,  7 Nov 2002 00:20:08 -0800 (PST)
	(envelope-from frode@nordahl.net)
Received: from dhcp01.wlan.powertech.no (dhcp01.wlan.powertech.no [195.159.6.140])
	by smtp1.powertech.no (Postfix) with ESMTP
	id B81158C07; Thu,  7 Nov 2002 09:20:00 +0100 (CET)
Subject: Re: Some problems with Orinoco card in -CURRENT
From: Frode Nordahl <frode@nordahl.net>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: current@FreeBSD.ORG
In-Reply-To: <1036622707.750.2.camel@samwise.xu.nordahl.net>
References: <1036617037.581.4.camel@samwise.xu.nordahl.net> 
	<20021106.152802.31977531.imp@bsdimp.com> 
	<1036622707.750.2.camel@samwise.xu.nordahl.net>
Content-Type: multipart/mixed; boundary="=-QFGDJ9kCkrtad+6d4wBw"
X-Mailer: Ximian Evolution 1.0.8 
Date: 07 Nov 2002 09:19:51 +0100
Message-Id: <1036657191.576.4.camel@samwise.xu.nordahl.net>
Mime-Version: 1.0
Sender: owner-freebsd-current@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-current.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-current>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-current>
X-Loop: FreeBSD.ORG


--=-QFGDJ9kCkrtad+6d4wBw
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Hello, 

With OLDCARD there is no problem. 

boot -v attached. 

On Wed, 2002-11-06 at 23:45, Frode Nordahl wrote: 
> Hey,
> 
> On Wed, 2002-11-06 at 23:28, M. Warner Losh wrote:
> > Strange.  OLDCARD or NEWCARD?  Send me a full dmesg for each case,
> > since it is likely some resource conflict or another.  I do what
> > you've described hundreds of times over the past few months, so it has
> > to be something weird with your computer.
> 
> My computer might be wierd :)  I have a problem with the BIOS not
> initializing the memory correctly (I often see dmesg output and post
> morten messages from previous boot).
> 
> So I even did a __cold__ reboot (unplug AC, remove battery for a while)
> before this dmesg (boot -v).
> 
> I only hav NEWCARD kernel available at this time, will post a OLDCARD
> boot -v ASAP.
> 
> (See attachment)
> 
> > Warner.
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-current" in the body of the message
> 
> ----
> 

> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #2: Mon Nov  4 14:23:41 CET 2002
>     frode@samwise.xu.nordahl.net:/usr/src/sys/i386/compile/SAMWISE
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc05bc000.
> Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc05bc0b4.
> Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc05bc168.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05bc214.
> Calibrating clock(s) ... TSC clock: 1193637253 Hz, i8254 clock: 1193135 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254"  frequency 1193182 Hz
> CLK_USE_TSC_CALIBRATION not specified - using old calibration method
> Timecounter "TSC"  frequency 1193693787 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (1193.69-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
>   Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 234881024 (229376K bytes)
> Physical memory chunk(s):
> 0x00001000 - 0x0009efff, 647168 bytes (158 pages)
> 0x005e3000 - 0x0deeffff, 227594240 bytes (55565 pages)
> 0x0df00000 - 0x0dff7fff, 1015808 bytes (248 pages)
> avail memory = 221925376 (216724K bytes)
> bios32: Found BIOS32 Service Directory header at 0xc00f7290
> bios32: Entry = 0xfd6f0 (c00fd6f0)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xfd6f0+0x11e
> pnpbios: Found PnP BIOS data at 0xc00f72f0
> pnpbios: Entry = f0000:97e0  Rev = 1.0
> Other BIOS signatures found:
> Initializing GEOMetry subsystem
> null: <null device, zero device>
> random: <entropy source>
> mem: <memory & I/O>
> Pentium Pro MTRR support enabled
> VESA: information block
> 56 45 53 41 00 02 73 80 00 c0 01 00 00 00 22 00 
> 00 01 ef 01 00 01 57 79 00 c0 68 79 00 c0 70 79 
> 00 c0 00 01 01 01 03 01 05 01 07 01 0e 01 0f 01 
> 11 01 12 01 14 01 15 01 17 01 18 01 1a 01 1b 01 
> VESA: 39 mode(s) found
> VESA: v2.0, 31680k memory, flags:0x1, mode table:0xc04c36a2 (1000022)
> VESA: S3 Incorporated. Twister BIOS
> VESA: S3 Incorporated. VBE 2.0 Rev 1.1
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <PTLTD    RSDT  > on motherboard
> pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003904
> pci_open(1a):	mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=06051106)
> Using $PIR table, 8 entries at 0xc00fdf40
> PCI-Only Interrupts: none
> Location  Bus Device Pin  Link  IRQs
> embedded    0    0    A   0x56  3 4 5 6 7 9 10 11 12 14 15
> embedded    0    0    B   0x56  3 4 5 6 7 9 10 11 12 14 15
> embedded    0    0    C   0x57  3 4 5 6 7 9 10 11 12 14 15
> embedded    0    0    D   0x55  3 4 5 6 7 9 10 11 12 14 15
> embedded    0    7    C   0x56  5
> embedded    0    7    D   0x57  11
> embedded    0    4    A   0x55  10
> embedded    0    4    B   0x56  11
> embedded    0   13    A   0x56  5
> embedded    0    1    A   0x55  10
> embedded    1    0    A   0x55  10
> embedded    0   16    A   0x57  11
> embedded    0   16    B   0x56  11
> embedded    0   17    A   0x56  11
> embedded    0   17    B   0x57  11
> acpi0: power button is handled as a fixed feature programming model.
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> ACPI timer looks GOOD min = 1, max = 2, width = 2
> Timecounter "ACPI-fast"  frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> ---- initial configuration ------------------------
> \\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.1.0
> \\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.4.0
> \\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.4.1
> \\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.7.0
> \\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.7.1
> \\_SB_.PCI0.PIB_.LNKC irq   5: [  5  9 10 11] low,level,sharable 0.7.2
> \\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.7.3
> \\_SB_.PCI0.PIB_.LNKC irq   5: [  5  9 10 11] low,level,sharable 0.13.0
> \\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.16.0
> \\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.16.1
> \\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.17.0
> \\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.17.1
> ---- before setting priority for links ------------
> ---- before fixup boot-disabled links -------------
> ---- after fixup boot-disabled links --------------
> ---- arbitrated configuration ---------------------
> \\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.1.0
> \\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.4.0
> \\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.4.1
> \\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.7.0
> \\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.7.1
> \\_SB_.PCI0.PIB_.LNKC irq   5: [  5  9 10 11] low,level,sharable 0.7.2
> \\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.7.3
> \\_SB_.PCI0.PIB_.LNKC irq   5: [  5  9 10 11] low,level,sharable 0.13.0
> \\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.16.0
> \\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.16.1
> \\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.17.0
> \\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.17.1
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> 	map[10]: type 3, range 32, base ec000000, size 26, enabled
> found->	vendor=0x1106, dev=0x0605, revid=0x00
> 	bus=0, slot=0, func=0
> 	class=06-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0006, statreg=0xa210, cachelnsz=0 (dwords)
> 	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	powerspec 2  supports D0 D3  current D0
> found->	vendor=0x1106, dev=0x8605, revid=0x00
> 	bus=0, slot=1, func=0
> 	class=06-04-00, hdrtype=0x01, mfdev=0
> 	cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x1217, dev=0x6933, revid=0x01
> 	bus=0, slot=4, func=0
> 	class=06-07-00, hdrtype=0x02, mfdev=1
> 	cmdreg=0x0003, statreg=0x0410, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=255
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> found->	vendor=0x1217, dev=0x6933, revid=0x01
> 	bus=0, slot=4, func=1
> 	class=06-07-00, hdrtype=0x02, mfdev=1
> 	cmdreg=0x0003, statreg=0x0410, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
> 	intpin=b, irq=255
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> found->	vendor=0x1106, dev=0x0686, revid=0x42
> 	bus=0, slot=7, func=0
> 	class=06-01-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	powerspec 2  supports D0 D3  current D0
> 	map[20]: type 4, range 32, base 00001c20, size  4, enabled
> found->	vendor=0x1106, dev=0x0571, revid=0x06
> 	bus=0, slot=7, func=1
> 	class=01-01-8a, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	powerspec 2  supports D0 D3  current D0
> 	map[20]: type 4, range 32, base 00001c00, size  5, enabled
> found->	vendor=0x1106, dev=0x3038, revid=0x1a
> 	bus=0, slot=7, func=2
> 	class=0c-03-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0013, statreg=0x0210, cachelnsz=8 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=d, irq=11
> 	powerspec 2  supports D0 D3  current D0
> found->	vendor=0x1106, dev=0x3057, revid=0x40
> 	bus=0, slot=7, func=4
> 	class=06-01-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 4, range 32, base 00001000, size  8, enabled
> 	map[14]: type 4, range 32, base 00001c34, size  2, enabled
> 	map[18]: type 4, range 32, base 00001c30, size  2, enabled
> found->	vendor=0x1106, dev=0x3058, revid=0x50
> 	bus=0, slot=7, func=5
> 	class=04-01-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=c, irq=5
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 1, range 32, base e8004000, size 11, enabled
> 	map[14]: type 1, range 32, base e8000000, size 14, enabled
> found->	vendor=0x104c, dev=0x8023, revid=0x00
> 	bus=0, slot=13, func=0
> 	class=0c-00-10, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0012, statreg=0x0210, cachelnsz=8 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
> 	intpin=a, irq=5
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> 	map[10]: type 1, range 32, base e8004800, size  8, enabled
> 	map[14]: type 4, range 32, base 00001c38, size  3, enabled
> 	map[18]: type 4, range 32, base 00001400, size  8, enabled
> found->	vendor=0x11c1, dev=0x0450, revid=0x02
> 	bus=0, slot=16, func=0
> 	class=07-80-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
> 	intpin=a, irq=11
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 4, range 32, base 00001800, size  8, port disabled
> 	map[14]: type 1, range 32, base e8004c00, size 10, enabled
> found->	vendor=0x1113, dev=0x1216, revid=0x11
> 	bus=0, slot=17, func=0
> 	class=02-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0012, statreg=0x0290, cachelnsz=8 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
> 	intpin=a, irq=11
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> agp0: <VIA Generic host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
> agp0: allocating GATT for aperture of size 256M
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0xf000-0xfff
> pcib1:   memory decode     0xe8100000-0xe81fffff
> pcib1:   prefetched decode 0xf0000000-0xf7ffffff
> ---- initial configuration ------------------------
> \\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 1.0.0
> ---- before setting priority for links ------------
> ---- before fixup boot-disabled links -------------
> ---- after fixup boot-disabled links --------------
> ---- arbitrated configuration ---------------------
> \\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 1.0.0
> pci1: <ACPI PCI bus> on pcib1
> pci1: physical bus=1
> 	map[10]: type 1, range 32, base e8100000, size 19, enabled
> 	map[14]: type 3, range 32, base f0000000, size 27, enabled
> found->	vendor=0x5333, dev=0x8d01, revid=0x02
> 	bus=1, slot=0, func=0
> 	class=03-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
> 	intpin=a, irq=10
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> pci1: <display, VGA> at device 0.0 (no driver attached)
> cbb0: <O2Micro OZ6833 PCI-CardBus Bridge> at device 4.0 on pci0
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> pcib0: matched entry for 0.4.INTA (source \\_SB_.PCI0.PIB_.LNKA)
> pcib0: slot 4 INTA is routed to irq 10
> cbb1: <O2Micro OZ6833 PCI-CardBus Bridge> at device 4.1 on pci0
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> pcib0: matched entry for 0.4.INTB (source \\_SB_.PCI0.PIB_.LNKB)
> pcib0: slot 4 INTB is routed to irq 11
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <VIA 82C686 ATA100 controller> port 0x1c20-0x1c2f at device 7.1 on pci0
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1c20
> ata0: mask=03 ostat0=50 ostat2=00
> ata0-master: ATAPI 00 00
> ata0-slave: ATAPI 00 00
> ata0: mask=03 stat0=50 stat1=00
> ata0-master: ATA 01 a5
> ata0: devices=01
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1c28
> ata1: mask=03 ostat0=50 ostat2=00
> ata1-master: ATAPI 14 eb
> ata1-slave: ATAPI 00 00
> ata1: mask=03 stat0=00 stat1=00
> ata1: devices=04
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 11 at device 7.2 on pci0
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
> ums0: 3 buttons and Z dir.
> isab1: <PCI-ISA bridge> at device 7.4 on pci0
> isa: isa0 already exists; skipping it
> pcm0: <VIA VT82C686A> port 0x1c30-0x1c33,0x1c34-0x1c37,0x1000-0x10ff irq 5 at device 7.5 on pci0
> pcm0: ac97 codec id 0x43525934 (Cirrus Logic CS4299D)
> pcm0: ac97 codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement
> pcm0: ac97 primary codec extended features variable rate PCM, AMAP
> pcm0: sndbuf_setmap 715000, 1000; 0xc22a1000 -> 715000
> pcm0: sndbuf_setmap 757000, 1000; 0xc22a3000 -> 757000
> pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
> pci0: <simple comms> at device 16.0 (no driver attached)
> dc0: <Accton EN2242 MiniPCI 10/100BaseTX> port 0x1800-0x18ff mem 0xe8004c00-0xe8004fff irq 11 at device 17.0 on pci0
> dc0: Ethernet address: 00:90:96:25:f3:85
> miibus0: <MII bus> on dc0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: OUI 0x000749, model 0x0001, rev. 1
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> bpf: dc0 attached
> acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
> fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> unknown: not probed (disabled)
> ppc0: using extended I/O port range
> ppc0: ECP SPP ECP+EPP SPP
> ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> bpf: lp0 attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> psmcpnp0 irq 12 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model GlidePoint, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000000, packet size:3
> psm0: syncmask:c0, syncbits:00
> acpi_acad0: <AC adapter> on acpi0
> acpi_cmbat0: <Control method Battery> on acpi0
> unknown: not probed (disabled)
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> fdc: fdc0 already exists; skipping it
> ppc: ppc0 already exists; skipping it
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> ex_isa_identify()
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xc0000-0xcbfff on isa0
> pmtimer0 on isa0
> adv0 failed to probe on isa0
> aha0 failed to probe on isa0
> aic0 failed to probe on isa0
> bt0 failed to probe on isa0
> cs0 failed to probe at port 0x300-0x31f on isa0
> ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
> fe0 failed to probe at port 0x300-0x31f on isa0
> ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
> le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
> lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic1: not probed (disabled)
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio0: not probed (disabled)
> sio1: not probed (disabled)
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: Cannot allocate irq
> sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0: vga0, vga, type:VGA (5), flags:0x700ff
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
> bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
> bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
> vt0 failed to probe on isa0
> isa_probe_children: probing PnP devices
> BIOS Geometries:
>  0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
>  0 accounted for
> Device configuration finished.
> procfs registered
> Timecounters tick every 10.000 msec
> bpf: lo0 attached
> acpi_cpu0: set speed to 100.0%
> acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
> acpi_acad0: acline initialization start
> acpi_acad0: On Line
> acpi_acad0: acline initialization done, tried 1 times
> acpi_cmbat0: battery initialization start
> pccard1: CIS version PC Card Standard 5.0
> pccard1: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01, 
> pccard1: Manufacturer code 0x156, product 0x2
> pccard1: function 0: network adapter, ccr addr 3e0 mask 1
> pccard1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
> wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
> wi0: 802.11 address: 00:02:2d:65:05:ab
> wi0: using Lucent Technologies, WaveLAN/IEEE
> wi0: Lucent Firmware: Station 7.28.01
> wi0: wi_has_wep = 1
> bpf: wi0 attached
> acpi_cmbat0: battery initialization done, tried 1 times
> ad0: success setting UDMA5 on VIA chip
> GEOM: new disk ad0
> ar: FreeBSD check1 failed
> ad0: <FUJITSU MHR2020AT/30B8> ATA-6 disk at ata0-master
> ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, UDMA100
> ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
> ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
> ata1-master: success setting PIO4 on generic chip
> acd0: <TOSHIBA DVD-ROM SD-C2502/1011> DVD-ROM drive at ata1 as master
> acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
> acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
> acd0: Writes:
> acd0: Audio: play, 16 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: CD-ROM 120mm audio disc
> MBR Slice 1 on ad0:
> 0000   00 01 01 00 0b fe 3f 23 3f 00 00 00 e5 d2 08 00  |......?#?.......|
> [0] f:00 typ:11 s(CHS):0/1/1 e(CHS):35/254/63 s:63 l:578277
> GEOM: Add ad0s1, start 32256 length 296077824 end 296110079
> MBR Slice 2 on ad0:
> 0000   80 00 81 f2 a5 fe ff ff 72 d4 b8 00 0e 55 9b 01  |........r....U..|
> [1] f:80 typ:165 s(CHS):242/0/129 e(CHS):255/254/255 s:12113010 l:26957070
> GEOM: Add ad0s2, start 6201861120 length 13802019840 end 20003880959
> MBR Slice 3 on ad0:
> 0000   00 00 01 24 83 fe bf c0 24 d3 08 00 5d fe a3 00  |...$....$...]...|
> [2] f:00 typ:131 s(CHS):36/0/1 e(CHS):192/254/191 s:578340 l:10747485
> GEOM: Add ad0s3, start 296110080 length 5502712320 end 5798822399
> MBR Slice 4 on ad0:
> 0000   00 00 81 c1 82 fe bf f1 81 d1 ac 00 f1 02 0c 00  |................|
> [3] f:00 typ:130 s(CHS):193/0/129 e(CHS):241/254/191 s:11325825 l:787185
> GEOM: Add ad0s4, start 5798822400 length 403038720 end 6201861119
> GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
> GEOM: Configure ad0s2b, start 134217728 length 453746688 end 587964415
> GEOM: Configure ad0s2c, start 0 length 13802019840 end 13802019839
> GEOM: Configure ad0s2d, start 587964416 length 268435456 end 856399871
> GEOM: Configure ad0s2e, start 856399872 length 268435456 end 1124835327
> GEOM: Configure ad0s2f, start 1124835328 length 12677184512 end 13802019839
> Mounting root from ufs:/dev/ad0s2a
> start_init: trying /sbin/init
> splash: image decoder found: green_saver
> Linux ELF exec handler installed
> ltmdm0: <Lucent Winmodem> port 0x1400-0x14ff,0x1c38-0x1c3f mem 0xe8004800-0xe80048ff irq 11 at device 16.0 on pci0
> ltmdm0: type Virtual 16550A
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: init failed
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0001; event status 0x0000
> wi0: timeout in wi_cmd 0x000a; event status 0x0000
> wi0: failed to allocate 1594 bytes on NIC
> wi0: tx buffer allocation failed
> wi0: timeout in wi_cmd 0x000a; event status 0x0000
> wi0: failed to allocate 1594 bytes on NIC
> wi0: mgmt. buffer allocation failed
> wi0: timeout in wi_cmd 0x0002; event status 0x0000
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: init failed
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0001; event status 0x0000
> wi0: timeout in wi_cmd 0x000a; event status 0x0000
> wi0: failed to allocate 1594 bytes on NIC
> wi0: tx buffer allocation failed
> wi0: timeout in wi_cmd 0x000a; event status 0x0000
> wi0: failed to allocate 1594 bytes on NIC
> wi0: mgmt. buffer allocation failed
> wi0: timeout in wi_cmd 0x0002; event status 0x0000
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: init failed
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0121; event status 0x0000
> wi0: timeout in wi_cmd 0x0001; event status 0x0000
> wi0: timeout in wi_cmd 0x000a; event status 0x0000
> wi0: failed to allocate 1594 bytes on NIC
> wi0: tx buffer allocation failed
> wi0: timeout in wi_cmd 0x000a; event status 0x0000
> wi0: failed to allocate 1594 bytes on NIC
> wi0: mgmt. buffer allocation failed
> wi0: detached
> pccard1: CIS version PC Card Standard 5.0
> pccard1: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01, 
> pccard1: Manufacturer code 0x156, product 0x2
> pccard1: function 0: network adapter, ccr addr 3e0 mask 1
> pccard1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
> wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
> wi0: 802.11 address: 00:02:2d:65:05:ab
> wi0: using Lucent Technologies, WaveLAN/IEEE
> wi0: Lucent Firmware: Station 7.28.01
> wi0: wi_has_wep = 1
> bpf: wi0 attached
> acpi_acad0: Notify 128
> acpi_ec0: EcWaitEventIntr called without EC lock!
> acpi_cmbat0: battery info corrupted
> acpi_ec0: EcWaitEventIntr called without EC lock!
> acpi_ec0: EcRead: Failed waiting for EC to send data.
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
> acpi_ec0: EcRead: Failed waiting for EC to send data.
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
> acpi_cmbat0: battery status corrupted

--=-QFGDJ9kCkrtad+6d4wBw
Content-Disposition: attachment; filename=OLDCARD_dmesg.txt
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; NAME=OLDCARD_dmesg.txt; CHARSET=ISO-8859-1

rity for links ------------
---- before fixup boot-disabled links -------------
---- after fmxup bmot-disabled links --------------
---- arbitrated configuration ---\M-------------------
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 1.0.0
pci1: 8ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib0: slot 4 INTA is routed to irq 10
pcic0: <O2micro 6933 PCI-Cardbus Bridge> irq 10 at device 4.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: Warning: O2miCro OZ68xx chips may not work
pccard0: <PC Card 16-bit bus (clarsic)> on pcic0
pcib0: slot 4 INTB is routed to irq 11
pcic1: <O2micro 6933 PCI-Cardbus Bridge> irq 11 at device 4.1 on pci0
pcic1: PCI Memory allocated: 0x8800\M-1000
pcic1: Warning: O2micro OZ68xx chips may not work
pccard1: <PC Card 16-bit bus (classic)> on pcic1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x1c20-0x1c2f at device 7.1 on=
 pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 11 et device 7.2 =
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0> 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
isab1: <PCI-ISA bridge> at device 7.4 on pci0
pcm0: <VIA VT82C686A> port 0x1c30-0x1c33,0x1c34-0x1c37,0x1000-0x10ff irq 5 =
at device 7.5 on Pci0
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
pci0: <simple comms> at device 16.0 (no driver attached)
dc8: <Accton EN2242 MiniPCI 10/100BaseTX> port 0x1800-0x18ff mem 0xe8004c00=
-0xe8004fff irq 11 at device 17.0 on pci0
dc0: Ethernet address: 00:90:96:25:f3:85
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
fdc0: <enhanced floxpy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 d2q 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> dlags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe4000,0xe7fff,0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad0: 19077MB <FUJIT\M-SU MHR2020AT> [38760/16/63] at ata0-master UDMA100
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4
\M-Mounting root from ufs:/dev/ad0s2a
,118>Starting syslogd.
ltmdm0: <Lucent Winmodem> port 0x1400-0x14ff,0x1c38-0x1c3f mem 0xe8004800-0=
xe80048ff irq 11 at device 16.0 on pci0
ltmdm0: type Virtual 16550A
pccard: card inserted, slot 1
wi0 at port 0x300-0x33f irq 11 slot 1 on pccard1
wi0: 802.11 address: 00:02:2d:65:05:ab
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmgare: Station \M-7.28.01
ltmdm0: detached
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process"`bufdaemon' tn stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...{topped

syncing disks... 9 9 9 1 1=20
done
Uptime: 1m28s
Power system off using ACPI...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Nov  6 23:53:14 CET 2002
    frode@samwise.xu.nordahl.net:/usr/src/sys/i386/compile/SAMWISE_OLDCARD
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05b1000.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc05b10b4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc05b1168.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05b1214.
Calibrating clock(s) ... TSC clock: 1193627881 Hz, i8254 clock: 1193126 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 1193694091 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1193.69-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x6b1  Stepping =3D 1
  Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  =3D 234881024 (229376K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x005d8000 - 0x0deeffff, 227639296 bytes (55576 pages)
0x0df00000 - 0x0dff7fff, 1015808 bytes (248 pages)
avail memory =3D 221970432 (216768K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7290
bios32: Entry =3D 0xfd6f0 (c00fd6f0)  Rev =3D 0  Len =3D 1
pcibios: PCI BIOS entry at 0xfd6f0+0x11e
pnpbios: Found PnP BIOS data at 0xc00f72f0
pnpbios: Entry =3D f0000:97e0  Rev =3D 1.0
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 73 80 00 c0 01 00 00 00 22 00=20
00 01 ef 01 00 01 57 79 00 c0 68 79 00 c0 70 79=20
00 c0 00 01 01 01 03 01 05 01 07 01 0e 01 0f 01=20
11 01 12 01 14 01 15 01 17 01 18 01 1a 01 1b 01=20
VESA: 39 mode(s) found
VESA: v2.0, 31680k memory, flags:0x1, mode table:0xc04b88e2 (1000022)
VESA: S3 Incorporated. Twister BIOS
VESA: S3 Incorporated. VBE 2.0 Rev 1.1
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003904
pci_open(1a):	mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=3D060000] [hdr=3D00] is there (id=3D06051106)
Using $PIR table, 8 entries at 0xc00fdf40
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    0    A   0x56  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    B   0x56  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    C   0x57  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    D   0x55  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    C   0x56  5
embedded    0    7    D   0x57  11
embedded    0    4    A   0x55  10
embedded    0    4    B   0x56  11
embedded    0   13    A   0x56  5
embedded    0    1    A   0x55  10
embedded    1    0    A   0x55  10
embedded    0   16    A   0x57  11
embedded    0   16    B   0x56  11
embedded    0   17    A   0x56  11
embedded    0   17    B   0x57  11
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 2
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.1.0
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.4.0
\\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.4.1
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.7.0
\\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.7.1
\\_SB_.PCI0.PIB_.LNKC irq   5: [  5  9 10 11] low,level,sharable 0.7.2
\\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.7.3
\\_SB_.PCI0.PIB_.LNKC irq   5: [  5  9 10 11] low,level,sharable 0.13.0
\\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.16.0
\\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.16.1
\\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.17.0
\\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.17.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.1.0
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.4.0
\\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.4.1
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 0.7.0
\\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.7.1
\\_SB_.PCI0.PIB_.LNKC irq   5: [  5  9 10 11] low,level,sharable 0.7.2
\\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.7.3
\\_SB_.PCI0.PIB_.LNKC irq   5: [  5  9 10 11] low,level,sharable 0.13.0
\\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.16.0
\\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.16.1
\\_SB_.PCI0.PIB_.LNKB irq  11: [ 11] low,level,sharable 0.17.0
\\_SB_.PCI0.PIB_.LNKD irq  11: [ 11] low,level,sharable 0.17.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
	map[10]: type 3, range 32, base ec000000, size 26, enabled
found->	vendor=3D0x1106, dev=3D0x0605, revid=3D0x00
	bus=3D0, slot=3D0, func=3D0
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0xa210, cachelnsz=3D0 (dwords)
	lattimer=3D0x08 (240 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=3D0x1106, dev=3D0x8605, revid=3D0x00
	bus=3D0, slot=3D1, func=3D0
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
	cmdreg=3D0x0007, statreg=3D0x2230, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1217, dev=3D0x6933, revid=3D0x01
	bus=3D0, slot=3D4, func=3D0
	class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
	cmdreg=3D0x0003, statreg=3D0x0410, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x80 (32000 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D255
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=3D0x1217, dev=3D0x6933, revid=3D0x01
	bus=3D0, slot=3D4, func=3D1
	class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
	cmdreg=3D0x0003, statreg=3D0x0410, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x80 (32000 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D255
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=3D0x1106, dev=3D0x0686, revid=3D0x42
	bus=3D0, slot=3D7, func=3D0
	class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0087, statreg=3D0x0210, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00001c20, size  4, enabled
found->	vendor=3D0x1106, dev=3D0x0571, revid=3D0x06
	bus=3D0, slot=3D7, func=3D1
	class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00001c00, size  5, enabled
found->	vendor=3D0x1106, dev=3D0x3038, revid=3D0x1a
	bus=3D0, slot=3D7, func=3D2
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0013, statreg=3D0x0210, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dd, irq=3D11
	powerspec 2  supports D0 D3  current D0
found->	vendor=3D0x1106, dev=3D0x3057, revid=3D0x40
	bus=3D0, slot=3D7, func=3D4
	class=3D06-01-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0000, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00001000, size  8, enabled
	map[14]: type 4, range 32, base 00001c34, size  2, enabled
	map[18]: type 4, range 32, base 00001c30, size  2, enabled
found->	vendor=3D0x1106, dev=3D0x3058, revid=3D0x50
	bus=3D0, slot=3D7, func=3D5
	class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0001, statreg=3D0x0210, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dc, irq=3D5
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base e8004000, size 11, enabled
	map[14]: type 1, range 32, base e8000000, size 14, enabled
found->	vendor=3D0x104c, dev=3D0x8023, revid=3D0x00
	bus=3D0, slot=3D13, func=3D0
	class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0012, statreg=3D0x0210, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns)
	intpin=3Da, irq=3D5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e8004800, size  8, enabled
	map[14]: type 4, range 32, base 00001c38, size  3, enabled
	map[18]: type 4, range 32, base 00001400, size  8, enabled
found->	vendor=3D0x11c1, dev=3D0x0450, revid=3D0x02
	bus=3D0, slot=3D16, func=3D0
	class=3D07-80-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0003, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0xfc (63000 ns), maxlat=3D0x0e (3500 n=
s)
	intpin=3Da, irq=3D11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00001800, size  8, port disabled
	map[14]: type 1, range 32, base e8004c00, size 10, enabled
found->	vendor=3D0x1113, dev=3D0x1216, revid=3D0x11
	bus=3D0, slot=3D17, func=3D0
	class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0012, statreg=3D0x0290, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0xff (63750 ns), maxlat=3D0xff (63750 =
ns)
	intpin=3Da, irq=3D11
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xec000000-0xefffffff at device =
0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe8100000-0xe81fffff
pcib1:   prefetched decode 0xf0000000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.PIB_.LNKA irq  10: [ 10] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
	map[10]: type 1, range 32, base e8100000, size 19, enabled
	map[14]: type 3, range 32, base f0000000, size 27, enabled
found->	vendor=3D0x5333, dev=3D0x8d01, revid=3D0x02
	bus=3D1, slot=3D0, func=3D0
	class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0xff (63750 n=
s)
	intpin=3Da, irq=3D10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib0: matched entry for 0.4.INTA (source \\_SB_.PCI0.PIB_.LNKA)
pcib0: slot 4 INTA is routed to irq 10
pcic0: <O2micro 6933 PCI-Cardbus Bridge> irq 10 at device 4.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: Warning: O2micro OZ68xx chips may not work
pcic0: PCI Configuration space:
  0x00: 0x69331217 0x04100003 0x06070001 0x00820000=20
  0x10: 0x88000000 0x020000a0 0x00000000 0x00000000=20
  0x20: 0x00000000 0x00000000 0x00000000 0x00000001=20
  0x30: 0x00000001 0x00000001 0x00000001 0x0420010a=20
  0x40: 0x001214c0 0x00000001 0x00000000 0x00000000=20
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0x90: 0x400023bf 0x024203c8 0x10000000 0x00000000=20
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000=20
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcib0: matched entry for 0.4.INTB (source \\_SB_.PCI0.PIB_.LNKB)
pcib0: slot 4 INTB is routed to irq 11
pcic1: <O2micro 6933 PCI-Cardbus Bridge> irq 11 at device 4.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pcic1: Warning: O2micro OZ68xx chips may not work
pcic1: PCI Configuration space:
  0x00: 0x69331217 0x04100003 0x06070001 0x00820000=20
  0x10: 0x88001000 0x020000a0 0x00000000 0x00000000=20
  0x20: 0x00000000 0x00000000 0x00000000 0x00000001=20
  0x30: 0x00000001 0x00000001 0x00000001 0x0420020b=20
  0x40: 0x001214c0 0x00000001 0x00000000 0x00000000=20
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0x90: 0x400023bf 0x024203c8 0x10000000 0x00000000=20
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000=20
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20
pccard1: <PC Card 16-bit bus (classic)> on pcic1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x1c20-0x1c2f at device 7.1 on=
 pci0
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0x1c20
ata0: mask=3D03 ostat0=3D50 ostat2=3D00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=3D03 stat0=3D50 stat1=3D00
ata0-master: ATA 01 a5
ata0: devices=3D01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0x1c28
ata1: mask=3D03 ostat0=3D50 ostat2=3D00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=3D03 stat0=3D00 stat1=3D00
ata1: devices=3D04
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 11 at device 7.2 =
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
isab1: <PCI-ISA bridge> at device 7.4 on pci0
isa: isa0 already exists; skipping it
pcm0: <VIA VT82C686A> port 0x1c30-0x1c33,0x1c34-0x1c37,0x1000-0x10ff irq 5 =
at device 7.5 on pci0
pcm0: ac97 codec id 0x43525934 (Cirrus Logic CS4299D)
pcm0: ac97 codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master v=
olume, Crystal Semi 3D Stereo Enhancement
pcm0: ac97 primary codec extended features variable rate PCM, AMAP
pcm0: sndbuf_setmap 714000, 1000; 0xc22a0000 -> 714000
pcm0: sndbuf_setmap 736000, 1000; 0xc22a2000 -> 736000
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
pci0: <simple comms> at device 16.0 (no driver attached)
dc0: <Accton EN2242 MiniPCI 10/100BaseTX> port 0x1800-0x18ff mem 0xe8004c00=
-0xe8004fff irq 11 at device 17.0 on pci0
dc0: Ethernet address: 00:90:96:25:f3:85
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000749, model 0x0001, rev. 1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
unknown: not probed (disabled)
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
pcic: pcic0 already exists; skipping it
pcic: pcic1 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xc0000-0xcbfff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: not probed (disabled)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 heads, 1..63=3D63 sector=
s
 0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
bpf: lo0 attached
pcic1: Event mask 0x6
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
ad0: success setting UDMA5 on VIA chip
GEOM: new disk ad0
pcic1: Power: Vcc=3D0 Vpp=3D0
pcic1: Power applied
Power complete.
pcic1: Power: Vcc=3D-1 Vpp=3D-1
pcic1: Couldn't autodetect voltage, assuming 5.0V
pcic1: Power applied
pcic1: Output enabled
pcic1: Settling complete
Power complete.
pccard: card inserted, slot 1
pcic1: reset 1 int is 90 stat is 7f
pccard: card removed, slot 1
ar: FreeBSD check1 failed
ad0: <FUJITSU MHR2020AT/30B8> ATA-6 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1
ata1-master: piomode=3D4 dmamode=3D2 udmamode=3D2 dmaflag=3D1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA DVD-ROM SD-C2502/1011> DVD-ROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm audio disc
MBR Slice 1 on ad0:
0000   00 01 01 00 0b fe 3f 23 3f 00 00 00 e5 d2 08 00  |......?#?.......|
[0] f:00 typ:11 s(CHS):0/1/1 e(CHS):35/254/63 s:63 l:578277
GEOM: Add ad0s1, start 32256 length 296077824 end 296110079
MBR Slice 2 on ad0:
0000   80 00 81 f2 a5 fe ff ff 72 d4 b8 00 0e 55 9b 01  |........r....U..|
[1] f:80 typ:165 s(CHS):242/0/129 e(CHS):255/254/255 s:12113010 l:26957070
GEOM: Add ad0s2, start 6201861120 length 13802019840 end 20003880959
MBR Slice 3 on ad0:
0000   00 00 01 24 83 fe bf c0 24 d3 08 00 5d fe a3 00  |...$....$...]...|
[2] f:00 typ:131 s(CHS):36/0/1 e(CHS):192/254/191 s:578340 l:10747485
GEOM: Add ad0s3, start 296110080 length 5502712320 end 5798822399
MBR Slice 4 on ad0:
0000   00 00 81 c1 82 fe bf f1 81 d1 ac 00 f1 02 0c 00  |................|
[3] f:00 typ:130 s(CHS):193/0/129 e(CHS):241/254/191 s:11325825 l:787185
GEOM: Add ad0s4, start 5798822400 length 403038720 end 6201861119
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 453746688 end 587964415
GEOM: Configure ad0s2c, start 0 length 13802019840 end 13802019839
GEOM: Configure ad0s2d, start 587964416 length 268435456 end 856399871
GEOM: Configure ad0s2e, start 856399872 length 268435456 end 1124835327
GEOM: Configure ad0s2f, start 1124835328 length 12677184512 end 13802019839
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
pcic1: reset 1 int is 90 stat is 7f
pcic1: Power: Vcc=3D0 Vpp=3D0
pcic1: Power applied
Power complete.
pcic1: Power: Vcc=3D-1 Vpp=3D-1
pcic1: Couldn't autodetect voltage, assuming 5.0V
pcic1: Power applied
pcic1: Output enabled
pcic1: Settling complete
Power complete.
pccard: card inserted, slot 1
pcic1: reset 2 int is f0 stat is 4f
pcic1: reset 3 int is f0 stat is 4f
pcic1: reset 3 int is f0 stat is 6f
pcic1: reset 0=20
splash: image decoder found: green_saver
Linux ELF exec handler installed
ltmdm0: <Lucent Winmodem> port 0x1400-0x14ff,0x1c38-0x1c3f mem 0xe8004800-0=
xe80048ff irq 11 at device 16.0 on pci0
ltmdm0: type Virtual 16550A
pccard1: Assigning wi0: io 0x300-0x33f irq 11 flags 0x0
pcic: I/O win 0 flags 15 300-33f
wi0: Forcing IRQ to 11
pcic: I/O win 0 flags 5 300-33f
wi0 at port 0x300-0x33f irq 11 slot 1 on pccard1
pcic: I/O win 0 flags 15 300-33f
wi0: Forcing IRQ to 11
wi0: 802.11 address: 00:02:2d:65:05:ab
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station 7.28.01
wi0: wi_has_wep =3D 1
bpf: wi0 attached
acpi_ec0: EcWaitEventIntr called without EC lock!
acpi_cmbat0: battery info corrupted
acpi_ec0: EcWaitEventIntr called without EC lock!
acpi_ec0: EcRead: Failed waiting for EC to send data.
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
acpi_cmbat0: battery status corrupted

--=-QFGDJ9kCkrtad+6d4wBw--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message