Date: Sun, 4 Jun 2000 22:03:18 -0600 (CST) From: <kpacka@24.65.132.221.sk.wave.home.com> To: freebsd-questions@FreeBSD.ORG Subject: SCSI printers Message-ID: <Pine.BSF.4.21.0006042202270.1996-100000@24.65.132.221.sk.wave.home.com>
next in thread | raw e-mail | index | archive | help
Are SCSI printers supported under FreeBSD 4.0-RELEASE at all? My printer is a NeXT Color Printer, the only device in the chain, terminated. The SCSI controller is a Symbios (previously NCR) 53C810. The box itself is a DECpc XL 560 with Pentium 60, 32M RAM, 510M hd and v1.03 of Phoenix BIOS. Other SCSI devices work properly when hooked to the same box. The following is a segment of my dmesg output, if that helps. pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 ncr0: <ncr 53c810 fast10 scsi> port 0xd100-0xd1ff mem 0x20000000-0x200000ff irq$ ncr0: driver is using old-style compatability shims isab0: <Intel 82378IB PCI to ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 pci0: <S3 928 graphics accelerator> at 6.0 de0: <Digital 21040 Ethernet> irq 119 at device 7.0 on pci0 de0: driver is using old-style compatability shims After that, devices pass0 through pass7 show up as being at ncr0 bus 0 target 3 lun X, where X is from 0 to 7. Again, the chain IS terminated, the SCSI ID is selected in the printer's menu. Any ideas, suggestions, donations of sledgehammers would be greately appreciated. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0006042202270.1996-100000>