From owner-freebsd-scsi Fri May 19 8:47: 4 2000 Delivered-To: freebsd-scsi@freebsd.org Received: from spike.porcupine.org (umbilical.porcupine.org [168.100.189.1]) by hub.freebsd.org (Postfix) with ESMTP id F0E3F37BDBC; Fri, 19 May 2000 08:46:52 -0700 (PDT) (envelope-from wietse@porcupine.org) Received: by spike.porcupine.org (Postfix, from userid 100) id 2816B4563D; Fri, 19 May 2000 11:46:50 -0400 (EDT) Subject: Re: Need FreeBSD 4.0 removable SCSI support In-Reply-To: <14629.21138.578322.41745@smpbox> from Ted Buswell at "May 19, 0 11:08:27 am" To: tbuswell@acadia.net (Ted Buswell) Cc: wietse@porcupine.org, freebsd-mobile@FreeBSD.ORG, freebsd-scsi@FreeBSD.ORG X-Time-Zone: USA EST, 6 hours behind central European time MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 2183 Message-Id: <20000519154650.2816B4563D@spike.porcupine.org> Date: Fri, 19 May 2000 11:46:50 -0400 (EDT) From: wietse@porcupine.org (Wietse Venema) Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Ted Buswell: > Even though you don't care anymore, whether or not the Jaz is upsetting > the card or driver by spewing garbage is easy to determine: with nothing > plugged into your bus adapter, does the rescan still lockup your > machine? Hmm, I didn't try that. I'll see if I can fire up 4.0. > And while we're talking about it, is the lockup a real > lockup, or is it simply that the camcontrol process hangs and you have > it in your startup sequence in such a way that the boot is not able to > continue? The machine is dead, as in not responding to keyboard events. It still responds to the power switch so I can avoid a hardware reset. > Also, did you do the obvious things like trying the aic on different > interrupts [well, at least both of the interrupts that you stated you > use with other devices successfully]? In your second(? third?) > message to the -scsi list, you sent the following (snippets from) dmesg: > > >aic1: at port 0x340-0x35f irq 3 slot 0 on pccard0 > >aic1: aic6360, dma, disconnection, parity check > >(probe0:aic1:0:0:0): ccb 0xc0b3c000 - timed out, phase 0xa6, state 1 > > I'm not sure about yours, but my 1460B does not list irq 3 as one of > the valid IRQ's that it can generate. Check "pccardc dumpcis" and > search for IRQ. While "timed out" messages could also be cable/device > related, on my setup they indicated an IRQ conflict. I've tested with IRQ3 and IRQ 9, with identical results. > For what it's worth, 5.0-CURRENT + SMP 2xPII + SlimSCSI 1460B (irq 9) + Iomega > Zip works. I figure the Jaz disk is causing the trouble. I'll see if I can get the 4.0 to work again. The 2.2.8 kernel complains when it recognizes the Jaz disk so I suppose its SCSI is not quite kosher. > > It looks like Linux will have to be my long-term solution. It was > > nice knowing you people. > > > > Wietse > > Apologies in advance if this was meant to convey that you are no > longer interested in resolving this problem. I would love to keep using FreeBSD. It is my primary environment. I really dislike Linux. Having to switch to Linux for my primary environment would not be fun at all. Wietse To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message