From owner-freebsd-scsi Wed Sep 8 17:40:38 1999 Delivered-To: freebsd-scsi@freebsd.org Received: from mail.HiWAAY.net (fly.HiWAAY.net [208.147.154.56]) by hub.freebsd.org (Postfix) with ESMTP id 0315214BFA for ; Wed, 8 Sep 1999 17:40:32 -0700 (PDT) (envelope-from dkelly@nospam.hiwaay.net) Received: from nospam.hiwaay.net (tnt8-216-180-14-22.dialup.HiWAAY.net [216.180.14.22]) by mail.HiWAAY.net (8.9.1a/8.9.0) with ESMTP id TAA19265; Wed, 8 Sep 1999 19:40:17 -0500 (CDT) Received: from localhost (localhost [127.0.0.1]) by nospam.hiwaay.net (8.9.3/8.9.3) with ESMTP id TAA27449; Wed, 8 Sep 1999 19:11:06 -0500 (CDT) (envelope-from dkelly@nospam.hiwaay.net) Message-Id: <199909090011.TAA27449@nospam.hiwaay.net> X-Mailer: exmh version 2.0.2 2/24/98 To: Kris Kirby Cc: scsi@FreeBSD.ORG From: David Kelly Subject: Re: Reformatting a 520-byte-per-sector drive In-reply-to: Message from Kris Kirby of "Tue, 07 Sep 1999 22:59:07 CDT." <37D5DF0B.FFF98713@airnet.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 08 Sep 1999 19:11:06 -0500 Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Kris Kirby writes: > da3 at ahc0 bus 0 target 0 lun 0 > da3: Fixed Direct Access SCSI-2 device > da3: 5.000MB/s transfers (5.000MHz, offset 12), Tagged Queueing Enabled > da3: 957MB (1931265 520 byte sectors: 64H 32S/T 943C) > > I want this to be 512 bytes/sector. Kris, I dunno if FreeBSD is smart enough to live with the drive blocked at 520 octets, if so then use it that way. I took an IBM 9G HD out of a StorageTek/Clariion RAID and tried every Win9x, NT, Macintosh, SGI, and Sun utility I could find for changing the block size "back" to 512. The drive would happily chug right along doing a low level format. But after it completed it was right back there at 520. I believe IBM ships drives with custom firmware for RAID OEM's with all parameters locked with the OEM's selections. Unless you can find new firmware and the utility to load it, you are probably stuck. Oh, and the drive wouldn't map out bad blocks either. After this exercise I was able to put the drive back into the RAID as a new drive, then bind it back into the RAID5. The binding process completed before I checked it the next morning. -- David Kelly N4HHE, dkelly@nospam.hiwaay.net ===================================================================== The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message