Date: Wed, 31 Mar 2004 15:46:53 -0500 From: John Baldwin <jhb@FreeBSD.org> To: gubarev@itep.ru Cc: freebsd-current@FreeBSD.org Subject: Re: hang/panic of 5.2.1-RELEASE installation. Message-ID: <200403311546.53353.jhb@FreeBSD.org> In-Reply-To: <Pine.LNX.4.58.0403290752020.17579@lattice.itep.ru> References: <Pine.LNX.4.58.0403290752020.17579@lattice.itep.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 28 March 2004 10:52 pm, gubarev@itep.ru wrote: > On Fri, 26 Mar 2004, John Baldwin wrote: > > On Friday 26 March 2004 04:54 am, gubarev@itep.ru wrote: > > > Dear all, > > > > > > fresh installation of 5.2.1-RELEASE fails here with > > > funny symptoms which apparently was never discussed before > > > (at least I failed to find anything similar). Machine basically > > > is P4 with 1Gb RAM, ATI Radeon 9000 (laptop - see below for details). > > > > > > 1. With HTT enabled and almost all devices disabled (via BIOS) > > > I have a strictly reproducible kernel panic right after interrupts > > > assignment. The relevant kernel message is > > > > > > "panic: interrupt from missing bus" > > > > > > which seems to be from sys/i386/i386/mptable.c. The verbose boot > > > and panic messages are given below. > > > > > > 2. Without HTT and with other devices enabled machine completely hangs > > > just at "Mounting root from ...". Perhaps this is usual hardware > > > conflict although I'm not sure. > > > > > > Any help will be greatly appreciated. Any additional details could > > > be provided immediately..... > > > > Can you post the output of mptable? > > Sorry, I see no way to do that - kernel is not loading at all, this was an > installation attempt. Drop into the loader and do 'set hint.apic.0.disabled=1' when you boot up. This will tell the kernel to only run in UP mode w/o using the APIC. This should let you install the box fine and then be able to boot up and run mptable once it is installed. -- John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200403311546.53353.jhb>