From owner-freebsd-hackers Wed Apr 5 22:00:32 1995 Return-Path: hackers-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id WAA10429 for hackers-outgoing; Wed, 5 Apr 1995 22:00:32 -0700 Received: from Xenon.Stanford.EDU (Xenon.Stanford.EDU [36.28.0.25]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id WAA10423 for ; Wed, 5 Apr 1995 22:00:31 -0700 Received: by Xenon.Stanford.EDU (5.61+IDA/25-Xenon-eef) id AA25823; Wed, 5 Apr 95 22:00:28 -0700 Date: Wed, 5 Apr 1995 22:00:27 -0700 (PDT) From: Terry Lee To: freebsd-hackers@FreeBSD.org Subject: AHA-2940 boot prob. 950322-SNAP Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: hackers-owner@FreeBSD.org Precedence: bulk Justin, Just installed 950322-SNAP over 950210-SNAP which was working okay. Can't boot from 0322 kernel. Boot sequence: ahc0 waiting for scsi devices to settle ahc0: no active SCB for reconnecting target 15, channel B-issuing ABORT SAVED_TCL == 0x0 ahc0: ahcintr-referenced scb. not valid during seqint 0x71 scb(15) ahc0: WARNING no command for scb15 (cmdcmplt) QOUTCNT == 0 then hangs. ctrl-alt-del gives me a page fault listing. 950210-SNAP booted okay but the kernel I compiled myself had problems. After a crash or after booting from DOS and going back to BSD, the system would hang at "ahc0 waiting for scsi devices to settle". After a reboot it might get one line farther to something like sychronous 10MB/s then hang. I have to boot with the boot disk kernel which boots okay, and then reboot again to my compiled kernel, then everything is okay. However, I can't get 950322 to work at all. Best regards, Terry I N T E R N E T Terry Lee, Technical Director D E S I G N 745 Stanford Avenue, Palo Alto, California 94306 G R O U P 415 424 0747 voice 415 424-0751 fax http://www.mall.net terryl@cs.stanford.edu http://www.mall.net/terry